| 1 |
Toughness augmentation by fibrillation and yielding in nanostructured blends with recycled polyurethane as a modifier
Reghunadhan A, Datta J, Kalarikkal N, Haponiuk JT, Thomas S
Applied Surface Science, 442, 403, 2018 |
| 2 |
Rigid polyurethane foams modified with selected layered silicate nanofillers
Danowska M, Piszczyk L, Strankowski M, Gazda M, Haponiuk JT
Journal of Applied Polymer Science, 130(4), 2272, 2013 |
| 3 |
Characteristics of continuous thermomechanical devulcanization of waste rubber with experimental design
Formela K, Bogucki M, Stasiek A, Cysewska M, Haponiuk JT
Przemysl Chemiczny, 92(3), 342, 2013 |
| 4 |
Effect of slightly crosslinked butyl rubber and compatibilizer additives on properties of recycled polyethylene-ground tire rubber blends
Formela K, Haponiuk JT, Stankiewicz P, Ryl J, Konska K
Przemysl Chemiczny, 92(4), 444, 2013 |
| 5 |
Effect of addition of PE-HD modified with maleic anhydride and shear forces on properties of PE-HD-ground tire rubber blends
Formela K, Korol J, Cysewska M, Haponiuk JT
Przemysl Chemiczny, 92(4), 512, 2013 |
| 6 |
Use of tall oil in chemical industry
Formela K, Haponiuk JT
Przemysl Chemiczny, 91(6), 1160, 2012 |
| 7 |
Preparation and properties of ion conductive polyurethane materials
Leszkowski K, Haponiuk JT, Datta J
Przemysl Chemiczny, 91(10), 1999, 2012 |
| 8 |
Effect of screw configuration and rotation speed of screws on quality of products of continuous thermomechanical devulcanization
Formela K, Cysewska M, Haponiuk JT, Stasiek A
Przemysl Chemiczny, 91(12), 2398, 2012 |
| 9 |
Crosslink density, thermal properties and morphology of SER-devulcanizate rubber vulcanizate with varying total content of carbon black
Formela K, Haponiuk JT, Stankiewicz P, Cysewska M, Chojnacka M
Przemysl Chemiczny, 91(12), 2403, 2012 |
| 10 |
Polystyrene/polybutadiene blends: An analysis of the phase-inversion region and cophase continuity and a comparison with theoretical predictions
Joseph S, Rutkowska M, Jastrzebska M, Janik H, Haponiuk JT, Thomas S
Journal of Applied Polymer Science, 89(4), 1007, 2003 |
