| 1 |
Ethanol/O-2 biofuel cell using a biocathode consisting of laccase/HOOC-MWCNTs/polydiallyldimethylammonium chloride
Gouranlou F, Ghourchian H
Enzyme and Microbial Technology, 86, 127, 2016 |
| 2 |
Fabrication of polyelectrolyte multilayered nano-capsules using a continuous layer-by-layer approach
Elizarova IS, Luckham PF
Journal of Colloid and Interface Science, 470, 92, 2016 |
| 3 |
Durable platinum/graphene catalysts assisted with polydiallyldimethylammonium for proton-exchange membrane fuel cells
Lei M, Liang C, Wang YJ, Huang K, Ye CX, Liu G, Wang WJ, Jin SF, Zhang R, Fan DY, Yang HJ, Wang YG
Electrochimica Acta, 113, 366, 2013 |
| 4 |
Recovery of lignocelluloses from pre-hydrolysis liquor in the lime kiln of kraft-based dissolving pulp production process by adsorption to lime mud
Shen J, Fatehi P, Soleimani P, Ni YH
Bioresource Technology, 102(21), 10035, 2011 |
| 5 |
Algae-removing and algicidal efficiencies of polydiallyldimethylammonium chloride composite coagulants in enhanced coagulation treatment of algae-containing raw water
Zhao XL, Zhang YJ
Chemical Engineering Journal, 173(1), 164, 2011 |
| 6 |
Adhesion and viability of waterborne pathogens on p-DADMAC coatings
van der Mei HC, Rustema-Abbing M, Langworthy DE, Collias DI, Mitchell MD, Bjorkquist DW, Busscher HJ
Biotechnology and Bioengineering, 99(1), 165, 2008 |
| 7 |
Surface morphology of cellulose films prepared by spin coating on silicon oxide substrates pretreated with cationic polyelectrolyte
Yokota S, Kitaoka T, Wariishi H
Applied Surface Science, 253(9), 4208, 2007 |
| 8 |
Effect of nitrate or sulfate on flocculation properties of cationic polymer flocculants
Tian BH, Ge XP, Pan G, Luan ZK
Desalination, 208(1-3), 134, 2007 |
| 9 |
Surface modification of nylon-6 fibers for medical applications
Shalaby SE, AI-Balakocy NG, El-Ola SMA
Journal of Applied Polymer Science, 104(6), 3788, 2007 |
| 10 |
Adsorption and flocculation behaviors of polydiallyldimethylammonium (PDADMA) salts: Influence of counterion
Tian BH, Ge XP, Pan G, Fan B, Luan ZK
International Journal of Mineral Processing, 79(4), 209, 2006 |
