| 1 |
Corrosion resistance appraisal of TiN, TiCN and TiAlN coatings deposited by CAE-PVD method on WC-Co cutting tools exposed to artificial sea water
Matei AA, Pencea I, Branzei M, Tranca DE, Tepes G, Sfat CE, Ciovica E, Gherghilescu AI, Stanciu GA
Applied Surface Science, 358, 572, 2015 |
| 2 |
Strain-free, single-phase metastable Ti0.38Al0.62N alloys with high hardness: metal-ion energy vs. momentum effects during film growth by hybrid high-power pulsed/dc magnetron cosputtering
Greczynski G, Lu J, Jensen J, Petrov I, Greene JE, Bolz S, Kolker W, Schiffers C, Lemmer O, Hultman L
Thin Solid Films, 556, 87, 2014 |
| 3 |
Nano-structured titanium and aluminium nitride coatings: Study by grazing incidence X-ray diffraction and X-ray absorption and anomalous diffraction
Tuilier MH, Pac MJ, Anokhin DV, Ivanov DA, Rousselot C, Thiaudiere D
Thin Solid Films, 526, 269, 2012 |
| 4 |
Structural, mechanical, and tribological studies of Cr-Ti-Al-N coating with different chemical compositions
Tam PL, Zhou ZF, Shum PW, Li KY
Thin Solid Films, 516(16), 5725, 2008 |
| 5 |
Coatings with intrinsic stress profile: Refined creep analysis of (Ti,Al)N and cracking due to cyclic laser heating
Klotz K, Bahr U, Bruckner W, Bahr HA, Balke H, Kirchhoff G, Weiss HJ, Gobel T, Menzel S, Wetzig K
Thin Solid Films, 496(2), 469, 2006 |
| 6 |
Creep analysis and laser-induced cracking of (Ti,Al)N coatings
Klotz K, Bahr HA, Balke H, Gobel T, Menzel S, Bahr U, Kirchhoff G, Wetzig K
Thin Solid Films, 413(1-2), 131, 2002 |
