1 |
Modeling of molybdenum transport and pressure drop increase in fixed bed reactors used for selective oxidation of methanol to formaldehyde using iron molybdate catalysts Raun KV, Thorhauge M, Hoj M, Jensen AD Chemical Engineering Science, 202, 347, 2019 |
2 |
Biodegradation of saline phenolic wastewater in a biological contact oxidation reactor with immobilized cells of Oceanimonas sp. Tan SW, Chen XC, Cui CZ, Hou Y, Li WG, You H Biotechnology Letters, 39(1), 91, 2017 |
3 |
Oscillations induced by bubble flow in a horizontal cylindrical vessel Kanai Y, Suzukawa K Chemical Engineering Science, 170, 393, 2017 |
4 |
Simulations of methane partial oxidation by CFD coupled with detailed chemistry at industrial operating conditions Zhang Q, Liu YF, Chen TW, Yu XY, Wang JF, Wang TF Chemical Engineering Science, 142, 126, 2016 |
5 |
A CFD model for gas uniform distribution in turbulent flow for the production of titanium pigment in chloride process Li YD, Xie G, Lei T, Bao CJ, Tian L, Hou YQ Chinese Journal of Chemical Engineering, 24(6), 749, 2016 |
6 |
New dynamic models for simulation of industrial SO2 oxidation reactors and wet gas sulfuric acid plants Sorensen PA, Mollerhoj M, Christensen KA Chemical Engineering Journal, 278, 421, 2015 |
7 |
Efficient azo dye removal in bioelectrochemical system and post-aerobic bioreactor: Optimization and characterization Cui D, Guo YQ, Lee HS, Cheng HY, Liang B, Kong FY, Wang YZ, Huang LP, Xu MY, Wang AJ Chemical Engineering Journal, 243, 355, 2014 |
8 |
Numerical analysis of hydrogen generation in a BWR during a severe accident Valdes-Parada FJ, Romero-Paredes H, Espinosa-Paredes G Chemical Engineering Research & Design, 91(4), 614, 2013 |
9 |
Prediction of advanced oxidation performance in various pilot UV/H2O2 reactor systems with MP- and LP- and DBD-UV lamps Hofman-Caris RCHM, Harmsen DJH, Beerendonk EF, Knol TH, Houtman CJ, Metz DH, Wols BA Chemical Engineering Journal, 210, 520, 2012 |
10 |
Azo dye removal in a membrane-free up-flow biocatalyzed electrolysis reactor coupled with an aerobic bio-contact oxidation reactor Cui D, Guo YQ, Cheng HY, Liang B, Kong FY, Lee HS, Wang AJ Journal of Hazardous Materials, 239, 257, 2012 |