1 |
Diamond like carbon films with embedded Cu nanoclusters deposited by reactive high power impulse magnetron sputtering: Pulse length effects Meskinis S, Vasiliauskas A, Andrulevicius M, Jurkeviciute A, Peckus D, Tamulevicius S Thin Solid Films, 673, 1, 2019 |
2 |
Copper nitride layers synthesized by pulsed magnetron sputtering Nowakowska-Langier K, Chodun R, Minikayev R, Okrasa S, Strzelecki GW, Wicher B, Zdunek K Thin Solid Films, 645, 32, 2018 |
3 |
WO3 thin films prepared by sedimentation and plasma sputtering Olejnicek J, Brunclikova M, Kment S, Hubicka Z, Kmentova H, Ksirova P, Cada M, Zlamal M, Krysa J Chemical Engineering Journal, 318, 281, 2017 |
4 |
Structure and density profile of diamond-like carbon films containing copper: Study by X-ray reflectivity, transmission electron microscopy, and spectroscopic ellipsometry Jurkeviciute A, Lazauskas A, Tamulevicius T, Vasiliauskas A, Peckus D, Meskinis S, Tamulevicius S Thin Solid Films, 630, 48, 2017 |
5 |
Control of the metal/gas ion ratio incident at the substrate plane during high-power impulse magnetron sputtering of transition metals in Ar Greczynski G, Zhirkov I, Petrov I, Greene JE, Rosen J Thin Solid Films, 642, 36, 2017 |
6 |
Reactive sputtering of titanium compounds using the magnetron system with a grounded cathode Chodun R, Nowakowska-Langier K, Wicher B, Okrasa S, Minikayev R, Zdunek K Thin Solid Films, 640, 73, 2017 |
7 |
Effect of the Si content on the microstructure of hard, multifunctional Hf-B-Si-C films prepared by pulsed magnetron sputtering Zhang MH, Jiang JC, Mares P, Houska J, Vlcek J, Meletis EI Applied Surface Science, 357, 1343, 2015 |
8 |
Oxygen diffusion at high temperatures within the SnO2/Sst interlayer in sputtered thin films Carretero E, Alonso R, Marco JM Applied Surface Science, 359, 669, 2015 |
9 |
Strain-free, single-phase metastable Ti0.38Al0.62N alloys with high hardness: metal-ion energy vs. momentum effects during film growth by hybrid high-power pulsed/dc magnetron cosputtering Greczynski G, Lu J, Jensen J, Petrov I, Greene JE, Bolz S, Kolker W, Schiffers C, Lemmer O, Hultman L Thin Solid Films, 556, 87, 2014 |
10 |
Dependence of the specific features of two PAPVD methods: Impulse Plasma Deposition (IPD) and Pulsed Magnetron Sputtering (PMS) on the structure of Fe-Cu alloy layers Nowakowska-Langier K, Chodun R, Nietubyc R, Minikayev R, Zdunek K Applied Surface Science, 275, 14, 2013 |