| 2583 - 2592 |
Study on the transient characteristics of the sensor tube of a thermal mass flow meter
Han IY, Kim DK, Kim SJ |
| 2593 - 2600 |
Explosive vapor bubble growth in uniformly superheated liquids: R-113 and mercury
Lee HS, Merte H |
| 2601 - 2612 |
Enhancement of oxygen transfer in liquid lead and lead-bismuth eutectic by natural convection
Ma H, Guo P, Zhang JS, Li N, Fu BMM |
| 2613 - 2624 |
Efficient defrosting of an inclined flat surface
Roy S, Kumar H, Anderson R |
| 2625 - 2634 |
Analysis of surface roughness effects on heat transfer in micro-conduits
Koo J, Kleinstreuer C |
| 2635 - 2651 |
Analysis of pulsating heat pipe with capillary wick and varying channel diameter
Holley B, Faghri A |
| 2652 - 2661 |
Laminar nanofluid flow in microheat-sinks
Koo J, Kleinstreuer C |
| 2662 - 2672 |
Constructal multi-scale structures with asymmetric heat sources of finite thickness
da Silva AK, Lorente S, Bejan A |
| 2673 - 2683 |
Heat transfer enhancement in nano-fluids suspensions: Possible mechanisms and explanations
Vadasz JJ, Govender S, Vadasz P |
| 2684 - 2696 |
Predicting the thermal performance characteristics of staggered vertical pin fin array heat sinks under combined mode radiation and mixed convection with impinging flow
Kobus CJ, Oshio T |
| 2697 - 2707 |
Prediction of heat transfer coefficient on the fin inside one-tube plate finned-tube heat exchangers
Chen HT, Song JP, Wang YT |
| 2708 - 2721 |
Unsteady turbulent heat transfer of mixed convection in a reciprocating circular ribbed channel
Wu HW, Lau CT |
| 2722 - 2734 |
Heat and mass transfer predictions of the early contact of a liquid metal on an intensely cooled moving substrate
Gerber AG |
| 2735 - 2740 |
Taylor diffusion in time-dependent flow
Azer K |
| 2741 - 2758 |
Relativistic moving heat source
Ali YM, Zhang LC |
| 2759 - 2770 |
Method to improve geometry for heat transfer enhancement in PCM composite heat sinks
Akhilesh R, Narasimhan A, Balaji C |
| 2771 - 2778 |
Transient laminar compressible boundary layers over a permeable circular cone near a plane of symmetry
Kumari M, Nath G |
| 2779 - 2786 |
Heat and mass transfer coefficients of falling-film absorption process
Fujita I, Hihara E |
| 2787 - 2794 |
Permeability of fractal porous media by Monte Carlo simulations
Yu BM, Zou MQ, Feng YJ |
| 2795 - 2800 |
Effects of outer tube length on saturated pool boiling heat transfer in a vertical annulus with closed bottoms
Kang MG |
| 2801 - 2805 |
Heat transfer in an evaporating thin liquid film moving slowly along the walls of an inclined microchannel
Chakraborty S, Som SK |
| 2806 - 2813 |
Influence of channel height on heat transfer augmentation in rectangular channels with two opposite rib-roughened walls
Chang SW, Liou TM, Juan WC |
