12043 - 12053 |
The socio-technological history of hydrogen and fuel cells in Sweden 1978-2005; mapping the innovation trajectory Hultman M, Yaras A |
12054 - 12059 |
Economic comparison of fuel cell powered forklifts to battery powered forklifts Renquist JV, Dickman B, Bradley TH |
12060 - 12068 |
Efficiency evaluation of high-temperature steam electrolytic systems coupled with different nuclear reactors Zhang WQ, Yu B, Xu JM |
12069 - 12073 |
Corrosion behavior of three bipolar plate materials in simulated SPE water electrolysis environment Wang JT, Wang WW, Wang C, Mao ZQ |
12074 - 12080 |
Preparation and electrochemical behavior of dense YSZ film for SOEC Yu B, Zhang WQ, Xu JM, Chen L, Luo X, Stephan K |
12081 - 12088 |
Non-conductive TiO2 as the anode catalyst support for PEM water electrolysis Mazur P, Polonsky J, Paidar M, Bouzek K |
12089 - 12096 |
Aromatic amines as proton carriers for catalytic enhancement of hydrogen evolution reaction on copper in acid solutions Vaduva CC, Vaszilcsin N, Kellenberger A |
12097 - 12104 |
Comparison of various circuit designs in the HI decomposition section of the iodine-sulfur process Guo HF, Zhang P, Chen SZ, Wang LJ, Xu JM |
12105 - 12113 |
Preparation of a novel bimodal catalytic membrane reactor and its application to ammonia decomposition for COx-free hydrogen production Li G, Kanezashi M, Lee HR, Maeda M, Yoshioka T, Tsuru T |
12114 - 12119 |
Chemical equilibrium analysis for hydrolysis of magnesium hydride to generate hydrogen Hiraki T, Hiroi S, Akashi T, Okinaka N, Akiyama T |
12120 - 12127 |
Efficient visible-light-driven photocatalytic H-2 production over Cr/N-codoped SrTiO3 Yu H, Yan SC, Li ZS, Yu T, Zou ZG |
12128 - 12137 |
CO2 gasification of coal cokes using internally circulating fluidized bed reactor by concentrated Xe-light irradiation for solar gasification Gokon N, Ono R, Hatamachi T, Li LY, Kim HJ, Kodama T |
12138 - 12149 |
Photoelectrochemical water splitting with nanocrystalline Zn1-xRuxO thin films Sharma V, Kumar P, Singh N, Upadhyay S, Satsangi VR, Dass S, Shrivastau R |
12150 - 12157 |
Photocatalytic hydrogen evolution under visible light irradiation by the polyoxometalate alpha-[AlSiW11(H2O)O-39](5-) -Eosin Y system Liu X, Li YX, Peng SQ, Lu GX, Li SB |
12158 - 12166 |
Cost analysis of wind-electrolyzer-fuel cell system for energy demand in Pinarbasi-Kayseri Genc G, Celik M, Genc MS |
12167 - 12174 |
Effect of carbon sources on the photobiological production of hydrogen using Rhodobacter sphaeroides RV Han HL, Liu BQ, Yang HJ, Shen JQ |
12175 - 12186 |
Pretreating mixed anaerobic communities from different sources: Correlating the hydrogen yield with hydrogenase activity and microbial diversity Pendyala B, Chaganti SR, Lalman JA, Shanmugam SR, Heath DD, Lau PCK |
12187 - 12197 |
Hydrogen production via the aqueous phase reforming of ethylene glycol over platinum-supported ordered mesoporous carbon catalysts: Effect of structure and framework-configuration Kim HD, Kim TW, Park HJ, Jeong KE, Chae HJ, Jeong SY, Lee CH, Kim CU |
12198 - 12204 |
Bioconversion of crude glycerol from biodiesel production to hydrogen Mangayil R, Karp M, Santala V |
12205 - 12218 |
An in silico re-design of the metabolism in Thermotoga maritima for increased biohydrogen production Nogales J, Gudmundsson S, Thiele I |
12219 - 12228 |
Biohydrogen production from xylose by Thermoanaerobacterium thermosaccharolyticum KKU19 isolated from hot spring sediment Khamtib S, Reungsang A |
12229 - 12233 |
Improved photo - Hydrogen production by transposon mutant of Rhodobacter capsulatus with reduced pigment Ma C, Guo LJ, Yang HH |
12234 - 12240 |
Dark fermentative hydrogen production from xylose by a hot spring enrichment culture Makinen AE, Nissila ME, Puhakka JA |
12241 - 12249 |
Ultrasonic pretreatment of palm oil mill effluent: Impact on biohydrogen production, bioelectricity generation, and underlying microbial communities Leano EP, Anceno AJ, Babel S |
12250 - 12257 |
Hydrogen production by the thermophilic eubacterium Thermotoga neapolitana from storage polysaccharides of the CO2-fixing diatom Thalassiosira weissflogii Dipasquale L, d'Ippolito G, Gallo C, Vella FM, Gambacorta A, Picariello G, Fontana A |
12258 - 12270 |
Ethanol reforming over Ni/CeGd catalysts with low Ni content Augusto BL, Costa LOO, Noronha FB, Colman RC, Mattos LV |
12271 - 12280 |
Experiments on hydrogen production from methanol steam reforming in the microchannel reactor Du XZ, Shen YQ, Yang LJ, Shi YS, Yang YP |
12281 - 12291 |
Mesoporous catalysts for dry reforming of methane: Correlation between structure and deactivation behaviour of Ni-containing catalysts de Sousa HSA, da Silva AN, Castro AJR, Campos A, Filho JM, Oliveira AC |
12292 - 12300 |
Highly efficient Au/ZrO2 catalysts for low-temperature water-gas shift reaction: Effect of pre-calcination temperature of ZrO2 Zhang YJ, Zhan YY, Chen CQ, Cao YN, Lin XY, Zheng Q |
12301 - 12306 |
Dehydrogenation kinetics and modeling studies of MgH2 enhanced by NbF5 catalyst using constant pressure thermodynamic forces Sabitu ST, Goudy AJ |
12307 - 12316 |
Dual-production of nickel foam supported carbon nanotubes and hydrogen by methane catalytic decomposition Xiong J, Dong XF, Dong YC, Hao XF, Hampshire S |
12317 - 12331 |
Thermal management of an independent steam reformer for a solid oxide fuel cell with constrained generalized predictive control Jiang JH, Li X, Deng ZH, Yang J, Zhang YS, Li J |
12332 - 12341 |
The effect of a H-2/CO mixture at varying ratios on the diesel particulate filter regeneration process: Towards an optimised fuel reformer design - Diesel engine aftertreatment system Hemmings S, Megaritis A |
12342 - 12350 |
Dry reforming of methane to syngas over La-promoted hydrotalcite clay-derived catalysts Serrano-Lotina A, Martin AJ, Folgado MA, Daza L |
12351 - 12357 |
Stability of a hydrogen molecule in a vacancy of palladium hydrides He JH, Dechiaro LF, Knies DL, Hubler GK, Grabowski KS, Moser AE, Dominguez DD, Kidwell DA, Hagelstein PL |
12358 - 12364 |
The controllable hydrolysis rate for LaMg12 hydride Ouyang LZ, Huang JM, Fang CJ, Zhang QA, Sun DL, Zhu M |
12365 - 12374 |
Assessment of errors on the kinetic data by entropy generation analysis Nyamsi SN, Yang FS, Wu Z, Bao ZW, Zhang ZX |
12375 - 12383 |
Improvement in high-temperature performance of Co-free high-Fe AB(5)-type hydrogen storage alloys Chao DL, Zhong CL, Ma ZW, Yang F, Wu YC, Zhu D, Wu CL, Chen YG |
12384 - 12392 |
Effects of pretreatment on MlNi(4.00)Co(0.45)Mn(0.38)Al(0.3) hydrogen storage alloy powders and the performance of 6 Ah prismatic traction battery Su G, He YH, Liu KY |
12393 - 12401 |
First principles study of various Zr-H phases with low H concentrations Wang F, Gong HR |
12402 - 12410 |
Spillover enhancement for hydrogen storage by Pt doped hypercrosslinked polystyrene Demirocak DE, Ram MK, Srinivasan SS, Kumar A, Goswami DY, Stefanakos EK |
12411 - 12419 |
Bare and Ni decorated Al12N12 cage for hydrogen storage: A first-principles study Zhang YH, Zheng XZ, Zhang SL, Huang SP, Wang P, Tian HP |
12420 - 12424 |
Kinetics and modeling study of a Mg(BH4)(2)/Ca(BH4)(2) destabilized system Ibikunle AA, Goudy AJ |
12425 - 12431 |
Enhanced hydrogen desorption from the Co-catalyzed LiBH4-Mg(BH4)(2) eutectic composite Chen JN, Zhang Y, Xiong ZT, Wu GT, Chu HL, He T, Chen P |
12432 - 12437 |
Thermionic emission of protons across a grain boundary in 5 mol% Y-doped SrZrO3, a hydrogen pump Chen CT, Kim SK, Ibbotson M, Yeung A, Kim S |
12438 - 12450 |
3D modeling of an HT-PEFC stack using reformate gas Kvesic M, Reimer U, Froning D, Luke L, Lehnert W, Stolten D |
12451 - 12463 |
Species transport in a high-pressure oxygen-generating proton-exchange membrane electrolyzer Myles TD, Nelson GJ, Peracchio AA, Roy RJ, Murach BL, Adamson GA, Chiu WKS |
12464 - 12473 |
Diagnosis of contamination introduced by ammonia at the cathode in a polymer electrolyte membrane fuel cell Yuan XZ, Li H, Yu Y, Jiang M, Qian WM, Zhang SS, Wang HJ, Wessel S, Cheng TTH |
12474 - 12480 |
Thermal transpiration effect on the mass transfer and flow behaviors of the pressure-driven hydrogen gas flow Ye JJ, Yang J, Zheng JY, Ding XT, Wong I, Li WZ, Chen C |
12481 - 12488 |
An innovating application of PEM fuel cell: Current source controlled by hydrogen supply Hinaje M, Rael S, Caron JP, Davat B |
12489 - 12503 |
Modeling gas flow in PEMFC channels: Part I - Flow pattern transitions and pressure drop in a simulated ex situ channel with uniform water injection through the GDL Grimm M, See EJ, Kandlikar SG |
12504 - 12512 |
Development of composite-metal hybrid bipolar plates for PEM fuel cells Lim JW, Lee DG |
12513 - 12521 |
Organosulfonic acid functionalized zeolite ZSM-5 as temperature tolerant proton conducting material Nur H, Kee GL, Hamdan H, Mahlia TMI, Efendi J, Metselaar HSC |
12522 - 12527 |
Cobalt-doped BaZrO3: A single phase air electrode material for reversible solid oxide cells Rao YY, Zhong SH, He F, Wang ZB, Peng RR, Lu YL |
12528 - 12539 |
Diopside - Mg orthosilicate and diopside - Ba disilicate glass-ceramics for sealing applications in SOFC: Sintering and chemical interactions studies Reddy AA, Tulyaganov DU, Goel A, Pascual MJ, Kharton VV, Tsipis EV, Ferreira JMF |
12540 - 12547 |
Optimisation of a solid oxide fuel cell reformer using surrogate modelling, design of experiments and computational fluid dynamics Peksen M, Blum L, Stolten D |
12548 - 12556 |
Sr1-xPrxCo0.95Sn0.05O3-delta ceramic as a cathode material for intermediate-temperature solid oxide fuel cells Wang SF, Hsu YF, Lu HC, Huang CC, Yeh CT |
12557 - 12573 |
Ni-8YSZ cermet re-oxidation of anode supported solid oxide fuel cell: From kinetics measurements to mechanical damage prediction Laurencin J, Roche V, Jaboutian C, Kieffer I, Mougin J, Steil MC |
12574 - 12579 |
A novel doped CeO2-LaFeO3 composite oxide as both anode and cathode for solid oxide fuel cells Liu LM, Sun KN, Li XK, Zhang M, Liu YB, Zhang NQ, Zhou XL |
12580 - 12585 |
Role of the glass transition temperature of Nafion 117 membrane in the preparation of the membrane electrode assembly in a direct methanol fuel cell (DMFC) Jung HY, Kim JW |
12586 - 12596 |
Cross-linked proton exchange membranes for direct methanol fuel cells: Effects of the cross-linker structure on the performances Wang J, Zhao CJ, Zhang LY, Li MY, Ni J, Wang S, Ma WJ, Liu ZG, Na H |
12597 - 12604 |
Rapid synthesis of Pt-based alloy/carbon nanotube catalysts for a direct methanol fuel cell using flash light irradiation Park SH, Jung HM, Um S, Song YW, Kim HS |
12605 - 12608 |
Investigation of anode flow field for direct dimethyl ether fuel cell Cai K, Wang C, Pu WH, Gao Y, Mao ZQ |
12609 - 12628 |
Transport through mixed proton, oxygen ion and electron/hole conductors: Analysis of fuel cells and electrolyzer cells using Onsager equations Virkar AV |
12629 - 12638 |
Preparation of Pt nanoparticles on carbon support using modified polyol reduction for low-temperature fuel cells Lee WD, Lim DH, Chun HJ, Lee HI |
12639 - 12649 |
Systemic tradeoff analysis of fuel cell mobility systems Biurrun R, Krieg D, Stolten D |
12650 - 12658 |
Carbon-supported Pt-Co nanoparticles as anode catalyst for direct borohydride-hydrogen peroxide fuel cell: Electrocatalysis and fuel cell performance Yi LH, Liu L, Liu X, Wang XY, Yi W, He PY, Wang XY |
12659 - 12665 |
Preparation and characterization of fluorinated poly(aryl ether oxadiazole)s anion exchange membranes based on imidazolium salts Hu QH, Shang YM, Wang YW, Xu M, Wang SB, Xie XF, Liu YG, Zhang HL, Wang JH, Mao ZQ |
12666 - 12679 |
A numerical approach of conjugate hydrogen permeation and polarization in a Pd membrane tube Chen WH, Syu WZ, Hung CI, Lin YL, Yang CC |
12680 - 12687 |
Effect of CO and CO2 on H-2 permeation through finger-like Pd-Ag membranes Miguel CV, Mendes A, Tosti S, Madeira LM |
12688 - 12693 |
Preparation of polytetrafluoroethylene porous membrane based composite alkaline exchange membrane with improved tensile strength and its fuel cell test Cao YC, Scott K, Wang X |
12694 - 12699 |
Bismuth doping effects on the structure, electrical conductivity and oxygen permeability of Ba0.6Sr0.4Co0.7Fe0.3O3-delta ceramic membranes Yang JY, Zhao HL, Liu XT, Shen YN, Xu LH |
12700 - 12707 |
High temperature H-2/CO2 separation using cobalt oxide silica membranes Smart S, Vente JF, da Costa JCD |
12708 - 12713 |
A mixed electronic and protonic conducting hydrogen separation membrane with asymmetric structure Zhu ZW, Yan LT, Liu HW, Sun WP, Zhang QP, Liu W |
12714 - 12724 |
Molecular dynamics simulation analysis of hydration effects on microstructure and transport dynamics in sulfonated poly(2,6-dimethyl-1,4-phenylene oxide) fuel cell membranes Bahlakeh G, Nikazar M |
12725 - 12730 |
Preparation of high-capacity air electrode for lithium-air batteries Gao Y, Wang C, Pu WH, Liu ZX, Deng CS, Zhang P, Mao ZQ |
12731 - 12740 |
Quantitative analysis of a successful public hydrogen station Brown T, Stephens-Romero S, Samuelsen GS |
12741 - 12750 |
The role of turbulent fluctuations on radiative emission in hydrogen and hydrogen-enriched methane flames Coelho PJ |
12751 - 12759 |
Effect of Ca doping on the electrical conductivity of the high temperature proton conductor LaNbO4 Bi Z, Pena-Martinez J, Kim JH, Bridges CA, Huq A, Hodges JP, Paranthaman MP |
12760 - 12764 |
First-principles based modeling of hydrogen permeation through Pd-Cu alloys Qin L, Jiang C |
12765 - 12770 |
Influence of copper as an alloying element on hydrogen environment embrittlement of austenitic stainless steel Michler T, Naumann J, Sattler E |
12771 - 12781 |
Determination of the autofrettage pressure and estimation of material failures of a Type III hydrogen pressure vessel by using finite element analysis Son DS, Hong JH, Chang SH |
12782 - 12782 |
Nazim Muradov receives award for excellence in research Daniel DR, Shields S |
12783 - 12783 |
includes SPECIAL SECTION 12th CHEC Preface Mao ZQ |
12784 - 12792 |
Simulation and experimental research on the adsorption bed temperature distribution during hydrogen purification Zeng LD, Zhu DS, Zhang H |
12793 - 12797 |
Highly hydrogen permeable Nb-Ti-Co hypereutectic alloys containing much primary bcc-(Nb, Ti) phase Luo WM, Ishikawa K, Aoki K |
12798 - 12804 |
Seasonal storage of electricity by hydrogen in benzene water system Huang HY, Yu Y, Chung KH |
12805 - 12812 |
Ultra thin gas diffusion layer development for PEMFC Hung CH, Chiu CH, Wang SP, Chiang IL, Yang H |
12813 - 12820 |
Catalyzed hydrogen spillover for hydrogen storage on microporous organic polymers Li BY, Huang X, Gong RN, Ma MR, Yang XJ, Liang LY, Tan B |
12821 - 12826 |
Proton transfer mechanism in perfluorinated sulfonic acid polytetrafluoroethylene Sun H, Sun Z, Wu YH |
12827 - 12832 |
Facile fabrication of visible light driven tin oxide photoanode and its photoelectrochemical water splitting properties Tian MK, Peng WJ, Shang BW, Tao WL, Xiao Y |
12833 - 12838 |
Microstructural modification of the anode/electrolyte interface of SOEC for hydrogen production Wang X, Yu B, Zhang WQ, Chen J, Luo X, Stephan K |
12839 - 12845 |
Temperature controlled three-stage catalytic dehydrogenation and cycle performance of perhydro-9-ethylcarbazole Yang M, Han CQ, Ni G, Wu JP, Cheng HS |
12846 - 12851 |
Photocatalytic water splitting on protonated form of layered perovskites K0.5La0.5Bi2M2O9 (M = Ta; Nb) by ion-exchange Chen W, Li CL, Gao HY, Yuan J, Shangguan WF, Su JC, Sun YZ |
12852 - 12859 |
Effects of initial pressure and hydrogen concentration on laminar combustion characteristics of diluted natural gas-hydrogen-air mixture Zheng SZ, Zhang X, Xu J, Jin BA |
12860 - 12867 |
Self-humidifying membrane electrode assembly prepared by adding PVA as hygroscopic agent in anode catalyst layer Liang HG, Zheng LP, Liao SJ |
12868 - 12878 |
Research on optimum method to eliminate backfire of hydrogen internal combustion engines based on combining postponing ignition timing with water injection of intake manifold Yang ZZ, Wang LJ, Zhang QB, Meng YB, Pei PC |
12879 - 12885 |
Microstructure and polarization of La0.8Sr0.2MnO3 cathode deposited by alcohol solution precursor plasma spraying Wang XM, Li CX, Li CJ, Yang GJ |
12886 - 12892 |
Photocatalytic water splitting into hydrogen and research on synergistic of Bi/Sm with solid solution of Bi-Sm-V photocatalyst Wang QZ, An N, Chen W, Wang RF, Wang FP, Lei ZQ, Shangguan WF |
12893 - 12904 |
CFD simulation for charge-discharge cycle of cryo-adsorptive hydrogen storage on activated carbon Xiao JS, Tong L, Cossement D, Benard P, Chahine R |
12905 - 12918 |
Influence of seasonal climate change on hydrogen production by sludge and the analysis of the reason Xu H, Wang H, Wang XF |
12919 - 12924 |
Sulfonated polybenzimidazole/zirconium phosphate composite membranes for high temperature applications Qian W, Shang YM, Fang M, Wang SB, Xie XF, Wang JH, Wang WX, Du JY, Wang YW, Mao ZQ |
12925 - 12940 |
Effects of electrode composition on the electrochemical performance and mechanical property of micro-tubular solid oxide fuel cell Li JY, Lin ZJ |
12941 - 12946 |
Hydrogen catalytic combustion over a Pt/Ce0.6Zr0.4O2/MgAl2O4 mesoporous coating monolithic catalyst Zhang CM, Zhang J, Ma JX |
12947 - 12959 |
Finite element simulation for charge-discharge cycle of cryo-adsorptive hydrogen storage on activated carbon Xiao JS, Hu M, Cossement D, Benard P, Chahine R |
12960 - 12966 |
A novel Bi1.5Zn1-xCuxTa1.5O7 photocatalyst: Water splitting properties under visible light and its electronic structures Sun JX, Chen G, Pei J, Jin RC, Li YX |
12967 - 12972 |
Simulation study about the effect of pressure on purification of H2SO4 and HIx phases in the iodine-sulfur hydrogen production cycle Wang LJ, Imai Y, Tanaka N, Kasahara S, Kubo S, Onuki K, Chen SZ, Zhang P, Xu JM |
12973 - 12979 |
Thermal decomposition kinetics of light-weight composite NaNH2-NaBH4 hydrogen storage materials for fuel cells Bai Y, Wu C, Wu F, Yang JH, Zhao LL, Long F, Yi BL |
12980 - 12986 |
Effects of cathodic electron acceptors and potassium ferricyanide concentrations on the performance of microbial fuel cell Wei LL, Han HL, Shen JQ |
12987 - 12993 |
Hydrogen from acetic acid as the model compound of biomass fast-pyralysis oil over Ni catalyst supported on ceria-zirconia Zheng XX, Yan CF, Hu RR, Li J, Hai H, Luo WM, Guo CQ, Li WB, Zhou ZY |
12994 - 13000 |
Effect of the microwave thermal treatment condition on Pt-Fe/C alloy catalyst performance Zheng JS, Fu R, Tian T, Wang XZ, Ma JX |
13001 - 13006 |
Microstructure, performance and stability of Ni/Al2O3 cermet-supported SOFC operating with coal-based syngas produced using supercritical water Li CX, Yun LL, Zhang Y, Li CJ, Guo LJ |
13007 - 13012 |
Fabrication of H-2-permeable palladium membranes based on pencil-coated porous stainless steel substrate Wei L, Yu J, Hu XJ, Huang Y |
13013 - 13021 |
Transport characteristic study of methane steam reforming coupling methane catalytic combustion for hydrogen production Wang F, Zhou J, Wang GQ |
13022 - 13029 |
High performance tubular solid oxide fuel cells with BSCF cathode Shi HG, Yang GM, Liu ZK, Zhang GR, Ran R, Shao ZP, Zhou W, Jin WQ |
13030 - 13036 |
Synthesis and photoactivity of CdS photocatalysts modified by polypyrrole Zhang S, Chen QY, Wang YH, Guo LJ |
13037 - 13043 |
Catalytic reforming of methane with CO2 over metal foam based monolithic catalysts Sang LX, Sun BA, Tan HY, Du CX, Wu YT, Ma CF |
13044 - 13052 |
CYO-BZCYO composites with enhanced proton conductivity: Candidate electrolytes for low-temperature solid oxide fuel cells Huang JB, Zhang L, Wang C, Zhang P |
13053 - 13059 |
Numerical analysis of the solar reactor design for a photoelectrochemical hydrogen production system Tseng CL, Tseng CJ, Cheng KY, Hourng LW, Chen JC, Weng LC, Wu SK |
13060 - 13066 |
Effects of flow field design on the performance of a PEM fuel cell with metal foam as the flow distributor Tsai BT, Tseng CJ, Liu ZS, Wang CH, Lee CI, Yang CC, Lo SK |
13067 - 13073 |
Preparation and hydrogen sorption properties of a nano-structured Mg based Mg-La-O composite Zou JX, Zeng XQ, Ying YJ, Stephane P, Ding WJ |
13074 - 13081 |
First-principles calculations of Cd1-xZnxS doped with alkaline earth metals for photocatalytic hydrogen generation Wu P, Zhou ZH, Shi JW, Guo LJ |
13082 - 13087 |
Effects of preparation on electrochemical properties of CoTMPP/C as catalyst for oxygen reduction reaction in acid media Kong HC, Yuan XX, Xia XY, Ma ZF |
13088 - 13091 |
Analysis of the cost-effectiveness of pressure for vehicular high-pressure gaseous hydrogen storage vessel Sun BG, Zhang DS, Liu FS |
13092 - 13096 |
Study of catalytic hydrogenation of N-ethylcarbazole over ruthenium catalyst Wan C, An Y, Xu GH, Kong WJ |
13097 - 13102 |
Characterization of the microstructure and electrochemical behavior of Sm0.7Sr0.3Co3-delta cathode deposited by solution precursor plasma spraying Li CX, Liu S, Zhang Y, Li CJ |
13103 - 13109 |
Highly performed non-humidification membrane electrode assembly prepared with binary RuO2-SiO2 oxide supported Pt catalysts as anode Zheng LP, Zeng Q, Liao SJ, Zeng JH |
13110 - 13117 |
Reforming of glycerol for producing hydrogen in a Pd/Ag membrane reactor Chang ACC, Lin WH, Lin KH, Hsiao CH, Chen HH, Chang HF |
13118 - 13124 |
Investigation of the characteristics of hydrogen injector using experiment and simulation in hydrogen internal combustion engine Sun BG, Zhang DS, Liu FS |
13125 - 13131 |
Heat transfer analysis of high-pressure hydrogen storage tanks subjected to localized fire Zheng JY, Ou KS, Bie HY, Xu P, Zhao YZ, Liu XX, He YT |
13132 - 13140 |
Reaction of Al powder with water for hydrogen generation under ambient condition Gai WZ, Liu WH, Deng ZY, Zhou JG |
13141 - 13146 |
A new control strategy for hybrid fuel cell-battery power systems with improved efficiency Chao CH, Shieh JJ |
13147 - 13154 |
Effects of NbF5 addition on the de/rehydrogenation properties of 2LiBH(4)/MgH2 hydrogen storage system Xiao XZ, Shao J, Chen LX, Kou HQ, Fan XL, Deng SS, Zhang LT, Li SQ, Ge HW, Wang QD |
13155 - 13160 |
Experimental study of temperature distribution on anodic surface of MEA inside a PEMFC with parallel channels flow bed Guo H, Wang MH, Ye F, Ma CF |
13161 - 13166 |
Enhanced cellulosic hydrogen production from lime-treated cornstalk wastes using thermophilic anaerobic microflora Cao GL, Guo WQ, Wang AJ, Zhao L, Xu CJ, Zhao QL, Ren NQ |
13167 - 13177 |
An efficient and green approach to prepare hydrophilic imidazolium ionic liquids free of halide and its effect on oxygen reduction reaction of Pt/C catalyst Gao J, Liu JG, Liu WM, Li B, Xin YC, Yin Y, Gu J, Zou ZG |
13178 - 13184 |
Effect of rapid solidification on phase structure and hydrogen storage properties of Mg-70(Ni0.75La0.25)(30) alloy Zhou HY, Lan XX, Wang ZM, Yao QR, Ni CY, Liu WP |
13185 - 13190 |
The research status of Nafion ternary composite membrane Ma J, Ni HJ, Su DY, Huang MY, Wang XX |
13191 - 13199 |
Cage-bell structured Au-Pt nanomaterials with enhanced electrocatalytic activity toward oxygen reduction Qu JL, Liu H, Ye F, Hu WW, Yang J |
13200 - 13208 |
Optimization of biohydrogen production from soybean straw using anaerobic mixed bacteria Han HL, Wei LL, Liu BQ, Yang HJ, Shen JQ |
13209 - 13218 |
Performance of a hydroxygen-blended gasoline engine at different hydrogen volume fractions in the hydroxygen Wang SF, Ji CW, Zhang B, Liu XL |
13219 - 13226 |
Influence of metal precursors on the catalytic activity and structure of non-precious metal electrocatalysts for oxygen reduction reaction Zhang HJ, Kong HC, Yuan XX, Jiang QZ, Yang JH, Ma ZF |
13227 - 13233 |
Hydrogen production by over-expression of hydrogenase subunit in oxygen-tolerant Klebsiella oxytoca HP1 Bai LP, Wu XB, Jiang LJ, Liu J, Long MN |
13234 - 13242 |
Investigation of modification of hydrogenation and structure properties of multi-substituted LaNi5 alloys Wan CB, Yan HZ, Ju X, Wang YT, Huang MF, Kong FQ, Xiong W |