| 10157 - 10169 |
Synthesis and characterization of macroporous Ni, Co and Ni-Co electrocatalytic deposits for hydrogen evolution reaction in alkaline media
Gonzalez-Buch C, Herraiz-Cardona I, Ortega E, Garcia-Anton J, Perez-Herranz V |
| 10170 - 10177 |
Electrocatalytic activity of crystalline Ni-Co-M (M = Cr, Mn, Cu) alloys on the oxygen evolution reaction in an alkaline environment
Rosalbino F, Delsante S, Borzone G, Scavino G |
| 10178 - 10190 |
Kinetics of the hydrogen evolution reaction on Ni-(Ebonex-supported Ru) composite coatings in alkaline solution
Lacnjevac UC, Jovic BM, Jovic VD, Radmilovic VR, Krstajic NV |
| 10191 - 10195 |
A mild H3BO3 environment for water splitting
Yu ZB, Zhao Q, Hao GY, Yuan W, Li JP |
| 10196 - 10207 |
Composite cathode based on Ni-loaded La0.75Sr0.25Cr0.5Mn0.5O3-delta for direct steam electrolysis in an oxide-ion-conducting solid oxide electrolyzer
Li YX, Gan Y, Wang Y, Xie K, Wu YC |
| 10208 - 10214 |
Electrodeposition of Ni-Co-Sn alloy from choline chloride-based deep eutectic solvent and characterization as cathode for hydrogen evolution in alkaline solution
Vijayakumar J, Mohan S, Kumar SA, Suseendiran SR, Pavithra S |
| 10215 - 10225 |
Modulating the textural properties and photocatalytic hydrogen production activity of TiO2 by high temperature supercritical drying
Parayil SK, Psota RJ, Koodali RT |
| 10226 - 10234 |
PEC electrode of ZnO nanorods sensitized by CdS with different size and its photoelectric properties
Liu ZF, Wang Y, Wang B, Li YB, Liu ZC, Han JH, Guo KY, Li YJ, Cui T, Han L, Liu CP, Li GM |
| 10235 - 10244 |
A web-enabled software for real-time biogas fermentation monitoring -Assessment of dark fermentations for correlations between medium conductivity and biohydrogen evolution
Kana EBG, Schmidt S, Kenfack RHA |
| 10245 - 10251 |
Analysis of H-2 to CO2 yield and physiological key parameters of Enterobacter aerogenes and Caldicellulosiruptor saccharolyticus
Martinez-Porqueras E, Rittmann S, Herwig C |
| 10252 - 10259 |
Reforming of olive mill wastewater through a Pd-membrane reactor
Tosti S, Accetta C, Fabbricino M, Sansovini M, Pontoni L |
| 10260 - 10269 |
Thermodynamics of hydrogen production from urea by steam reforming with and without in situ carbon dioxide sorption
Dupont V, Twigg MV, Rollinson AN, Jones JM |
| 10270 - 10276 |
Ozone pretreatment of wheat straw for enhanced biohydrogen production
Wu JN, Upreti S, Ein-Mozaffari F |
| 10277 - 10283 |
Biohydrogen production from oil palm frond juice and sewage sludge by a metabolically engineered Escherichia coli strain
Yasin NHM, Fukuzaki M, Maeda T, Miyazaki T, Maail CMHC, Ariffin H, Wood TK |
| 10284 - 10292 |
Catalytic activity and characterization of Fe-Zn-Mg-Al hydrotalcites in biohydrogen production
Wimonsong P, Llorca J, Nitisoravut R |
| 10293 - 10304 |
Hydrogen production from oxidative steam reforming of ethanol over rhodium catalysts supported on Ce-La solid solution
Han X, Yu YB, He H, Shan WP |
| 10305 - 10314 |
Steam reforming of dimethyl ether over a novel anodic gamma-Al2O3 supported copper bi-functional catalyst
Zhang Q, Fan FY, Xu GM, Ye DJ, Wang WH, Zhu ZB |
| 10315 - 10326 |
H-2 production in silica membrane reactor via methanol steam reforming: Modeling and HAZOP analysis
Ghasemzadeh K, Morrone P, Iulianelli A, Liguori S, Babaluo AA, Basile A |
| 10327 - 10344 |
Combining continuous catalytic regenerative naphtha reformer with thermally coupled concept for improving the process yield
Jafari M, Rafiei R, Amiri S, Karimi M, Iranshahi D, Rahimpour MR, Mahdiyar H |
| 10345 - 10353 |
Microwave deposition of Pt catalysts on carbon nanotubes with different oxidation levels for formic acid oxidation
Hsieh CT, Gu JL, Tzou DY, Chu YC, Chen YC |
| 10354 - 10363 |
Study of a nickel catalyst under conditions of the SER process: Influence of RedOx cycling
Lysikov AI, Okunev AG, Netskina OV |
| 10364 - 10372 |
Activated carbon from grass - A green alternative catalyst support for water electrolysis
Kalyani P, Anitha A, Darchen A |
| 10373 - 10380 |
Preparation of activated carbon supported Fe-Al2O3 catalyst and its application for hydrogen production by catalytic methane decomposition
Jin LJ, Si HH, Zhang JB, Lin P, Hu ZY, Qiu B, Hu HQ |
| 10381 - 10388 |
Montmorillonite modified by CNx supported Pt for methanol oxidation
Wang RF, Zhou TB, Qiu XL, Wang H, Wang QZ, Feng HQ, Linkov V, Ji S |
| 10389 - 10393 |
Electrochemical study of Ba0.5Sr0.5Co0.8Fe0.2O3 perovskite as bifunctional catalyst in alkaline media
Jin C, Cao XC, Lu FL, Yang ZR, Yang RZ |
| 10394 - 10406 |
Enhancement of heat recirculation on the hysteresis effect of catalytic partial oxidation of methane
Chen WH, Cheng YC, Hung CI |
| 10407 - 10416 |
Effects of Fe substitutions by Ni in La-Ni-O perovskite-type oxides in reforming of methane with CO2 and O-2
Jahangiri A, Aghabozorg H, Pahlauanzadeh H |
| 10417 - 10430 |
Experiment and computational fluid dynamics simulation of in-depth system hydrodynamics in dual-bed gasifier
Manchasing C, Kuchonthara P, Chalermsinsuwan B, Piumsomboon P |
| 10431 - 10437 |
Formation mechanism, phase structure and electrochemical properties of the La-Mg-Ni-based multiphase alloys by powder sintering LaNi5 and LaMgNi4
Zhang L, Han SM, Li Y, Liu JJ, Zhang JL, Wang JD, Yang SQ |
| 10438 - 10445 |
Facilitating de/hydrogenation by long-period stacking ordered structure in Mg based alloys
Liu JW, Zou CC, Wang H, Ouyang LZ, Zhu M |
| 10446 - 10452 |
Releasing 9.6 wt% of H-2 from Mg(NH2)(2)-3LiH-NH3BH3 through mechanochemical reaction
Cao HJ, Chua YS, Zhang Y, Xiong ZT, Wu GT, Qiu JS, Chen P |
| 10453 - 10460 |
Hydrogen uptake of high surface area-activated carbons doped with nitrogen
Zhao W, Fierro V, Fernandez-Huerta N, Izquierdo MT, Celzard A |
| 10461 - 10469 |
Effect of LiBH4 on hydrogen storage property of MgH2
Pan YB, Leng HY, Wei J, Li Q |
| 10470 - 10478 |
Hydrogen generation from hydrolysis of sodium borohydride by cubic Co-La-Zr-B nano particles as novel catalyst
Loghmani MH, Shojaei AF |
| 10479 - 10484 |
Structural study of a new B-rich phase obtained by partial hydrogenation of 2NaH+MgB2
Pistidda C, Napolitano E, Pottmaier D, Dornheim M, Klassen T, Baricco M, Enzo S |
| 10485 - 10493 |
Production of ultrapure hydrogen in a Pd-Ag membrane reactor using noble metals supported on La-Si oxides. Heterogeneous modeling for the water gas shift reaction
Cornaglia CA, Adrover ME, Munera JF, Pedernera MN, Borio DO, Lombardo EA |
| 10494 - 10501 |
CNT/PDMS composite membranes for H-2 and CH4 gas separation
Nour M, Berean K, Balendhran S, Ou JZ, Du Plessis J, McSweeney C, Bhaskaran M, Sriram S, Kalantar-zadeh K |
| 10502 - 10510 |
Development and characterization of covalently cross-linked SPEEK/Cs-TPA/CeO2 composite membrane and membrane electrode assembly for water electrolysis
Song MA, Ha SI, Park DY, Ryu CH, Kang AS, Moon SB, Chung JH |
| 10511 - 10518 |
A small-scale and portable 50 W PEMFC system that automatically generates hydrogen from a mixture of Al, CaO, NaOH and sodium CMC in water without external power supply
Park JT, Xu XR, Wang J, Zhu XJ |
| 10519 - 10526 |
Effective permeability of gas diffusion layer in proton exchange membrane fuel cells
Shou DH, Tang YH, Ye L, Fan JT, Ding F |
| 10527 - 10533 |
Preparation and characterization of new cobalt-free cathode Pr0.5Sr0.5Fe0.8Cu0.2O3-delta for IT-SOFC
Lu J, Yin YM, Ma ZF |
| 10534 - 10541 |
Measurement of the temperature distribution in a large solid oxide fuel cell short stack
Celik S, Timurkutluk B, Mat MD |
| 10542 - 10551 |
Study on paper-structured catalyst for direct internal reforming SOFC fueled by the mixture of CH4 and CO2
Shiratori Y, Ogura T, Nakajima H, Sakamoto M, Takahashi Y, Wakita Y, Kitaoka T, Sasaki K |
| 10552 - 10558 |
Pr1.8La0.2Ni0.74Cu0.21Ga0.05O4+delta as a potential cathode material with CO2 resistance for intermediate temperature solid oxide fuel cell
Peng SJ, Wei YY, Xue J, Chen Y, Wang HH |
| 10559 - 10566 |
Experimental study of dry reforming of biogas in a tubular anode-supported solid oxide fuel cell
Guerra C, Lanzini A, Leone P, Santarelli M, Beretta D |
| 10567 - 10576 |
Effects of CrN/Cr coating layer on durability of metal bipolar plates under a fuel recirculation system of direct methanol fuel cells
Park YC, Lee SH, Kim SK, Lim S, Jung DH, Choi SY, Kim JH, Peck DH |
| 10577 - 10584 |
Gas composition modeling in a reformed Methanol Fuel Cell system using adaptive Neuro-Fuzzy Inference Systems
Justesen KK, Andreasen SJ, Shaker HR, Ehmsen MP, Andersen J |
| 10585 - 10591 |
In situ spectroscopy studies of ethanol oxidation reaction using a single fuel cell/ATR-FTIR setup
Neto AO, Nandenha J, Assumpcao MHMT, Linardi M, Spinace EV, de Souza RFB |
| 10592 - 10601 |
Active layer materials coated with Teflon AF nano-films deposited from solutions in supercritical CO2 for fuel cell applications
Elmanovich IV, Kondratenko MS, Kolomytkin DO, Gallyamov MO, Khokhlov AR |
| 10602 - 10606 |
An alkaline direct ethylene glycol fuel cell with an alkali-doped polybenzimidazole membrane
An L, Zeng L, Zhao TS |
| 10607 - 10615 |
Influence and mechanism of dissolved oxygen on the performance of Ammonia-Oxidation Microbial Fuel Cell
Xie ZF, Chen H, Zheng P, Zhang JQ, Cai J, Abbas G |
| 10616 - 10624 |
Enhancement of the high-temperature performance of advanced nickel-metal hydride batteries with NaOH electrolyte containing NaBO2
Shangguan EB, Wang JL, Li J, Dan G, Chang ZR, Yuan XZ, Wang HJ |
| 10625 - 10629 |
Pd capped MgxTi1-x films: Promising anode materials for alkaline secondary batteries with superior discharge capacities and cyclic stabilities
Xin GB, Yang JZ, Fu H, Zheng J, Li XG |
| 10630 - 10639 |
Fuel cell-battery hybrid powered light electric vehicle (golf cart): Influence of fuel cell on the driving performance
Tolj I, Lototskyy MV, Davids MW, Pasupathi S, Swart G, Pollet BG |
| 10640 - 10647 |
Thermodynamic modeling of partially stratified charge engine characteristics for hydrogen-methane blends at ultra-lean conditions
Aliramezani M, Chitsaz I, Mozafari AA |
| 10648 - 10653 |
Comparative investigations of flame kernel development in a laser ignited hydrogen-air mixture and methane-air mixture
Dharamshi K, Pal A, Agarwal AK |
| 10654 - 10670 |
Hetero-/homogeneous combustion of hydrogen/air mixtures over platinum: Fuel-lean versus fuel-rich combustion modes
Schultze M, Mantzaras J |
| 10671 - 10682 |
A techno-economic evaluation of the use of hydrogen in a steel production process, utilizing nuclear process heat
Germeshuizen LM, Blom PWE |
| 10683 - 10693 |
Determination of apparent diffusivity of hydrogen in 9Cr-1MoVNbN steel using hot extraction-PEMHS technique
Padhy GK, Ramasubbu V, Murugesan N, Ramesh C, Parvathavarthini N, Albert SK |
| 10694 - 10703 |
Effects of cryogenic and tempered treatment on the hydrogen embrittlement susceptibility of TRIP-780 steels
Zhu X, Li W, Zhao HS, Jin XJ |
| 10704 - 10715 |
X-ray photoelectron spectroscopy investigation of magnetron sputtered Mg-Ti-H thin films
Jensen IJT, Thogersen A, Lovvik OM, Schreuders H, Dam B, Diplas S |
| 10716 - 10728 |
Hydrogen safety: The road toward green technology
Najjar YSH |
| 10729 - 10729 |
Development of La0.6Sr0.4Co0.2Fe0.8O3-delta cathode with an improved stability via La0.8Sr0.2MnO3-film impregnation (vol 38, pg 5375, 2013)
Zhu XB, Li N, Li YQ, Lu Z, Su WH, Zhen L |
| 10730 - 10730 |
Preface to CHEC2012 Special Section
Mao ZQ |
| 10731 - 10738 |
Hierarchical microarchitectures of AgGa1-xInxS2: Long chain alcohol assisted synthesis, band gap tailoring and photocatalytic activities of hydrogen generation
Sun JX, Chen G, Xiong GH, Pei J, Dong HJ |
| 10739 - 10745 |
High photocatalytic hydrogen production from methanol aqueous solution using the photocatalysts CuS/TiO2
Wang QZ, An N, Bai Y, Hang HH, Li JJ, Lu XL, Liu YH, Wang FP, Li ZM, Lei ZQ |
| 10746 - 10753 |
Visible light induced dye-sensitized photocatalytic hydrogen production over platinized TiO2 derived from decomposition of platinum complex precursor
Li L, Yue E, Lian LS, Ma WH |
| 10754 - 10760 |
Structure characteristics of CdS/H1.9K0.3La0.5Bi0.1Ta2O7 and photocatalytic activity for hydrogen evolution under visible light
Chen W, Gao HY, Yuan J, Shangguan WF, Su JC, Sun YZ |
| 10761 - 10767 |
Preparation of a novel recyclable cocatalyst wool-Pd for enhancement of photocatalytic H-2 evolution on CdS
Wang QZ, Li JJ, An N, Bai Y, Lu XL, Li J, Ma HC, Wang RF, Wang FP, Lei ZQ, Shangguan WF |
| 10768 - 10772 |
Bandgap modulation of polyimide photocatalyst for optimum H-2 production activity under visible light irradiation
Chu S, Wang Y, Wang CC, Yang JC, Zou ZG |
| 10773 - 10778 |
Fermentative hydrogen production from acetate using Rhodobacter sphaeroides RV
Han HL, Jia QB, Liu BQ, Yang HJ, Shen JQ |
| 10779 - 10787 |
Improvement of hydrogen production of Chlamydomonas reinhardtii by co-cultivation with isolated bacteria
Li XX, Huang S, Yu J, Wang QX, Wu SX |
| 10788 - 10794 |
A study of methanol steam reforming on distributed catalyst bed
Wang GQ, Wang F, Li LJ, Zhang GF |
| 10795 - 10801 |
Synthesis of thin amine-functionalized MIL-53 membrane with high hydrogen permeability
Fan HY, Xia HP, Kong CL, Chen L |
| 10802 - 10812 |
Calculation of the hydrogen production rate by a palladium membrane separator: Theoretical approaches
Xie DL, Lu NN, Wang F, Fan SS |
| 10813 - 10818 |
Bacterial cellulose-assisted hydrothermal synthesis and catalytic performance of La2CuO4 nanofiber for methanol steam reforming
Yang JZ, Tang WH, Liu XL, Chao C, Liu JG, Sun DP |
| 10819 - 10825 |
An improvement of the hydrogen permeability of C/Al2O3 membranes by palladium deposition into the pores
Wang C, Yu J, Hu XJ, Huang Y |
| 10826 - 10832 |
Syngas production from oxidative methane reforming and CO cleaning with water gas shift reaction
Xie DL, Zhao J, Wang ZL, Zhang YJ |
| 10833 - 10838 |
Silver coating on porous stainless steel substrate and preparation of H-2-permeable palladium membranes
Wei L, Yu J, Huang Y |
| 10839 - 10844 |
HI decomposition over PtNi/C bimetallic catalysts prepared by electroless plating
Li DC, Wang LJ, Zhang P, Chen SZ, Xu JM |
| 10845 - 10850 |
Hydrogen generation from hydrolysis of solid sodium borohydride promoted by a cobalt-molybdenum-boron catalyst and aluminum powder
Zhuang DW, Zhang JJ, Dai HB, Wang P |
| 10851 - 10856 |
Dehydriding properties of gamma-AlH3
Liu HZ, Wang XH, Dong ZH, Cao GZ, Liu YA, Chen LX, Yan M |
| 10857 - 10863 |
Hydrolysis of AlLi/NaBH4 system promoted by Co powder with different particle size and amount as synergistic hydrogen generation for portable fuel cell
Fan MQ, Wang Y, Tian GL, Mei DS, Chen D, Shu KY |
| 10864 - 10870 |
Fast hydrogen generation from NaBH4 hydrolysis catalyzed by carbon aerogels supported cobalt nanoparticles
Zhu J, Li R, Niu WL, Wu YJ, Gou XL |
| 10871 - 10879 |
Heat and mass transfer and fluid flow in cryo-adsorptive hydrogen storage system
Xiao JS, Peng R, Cossement D, Benard P, Chahine R |
| 10880 - 10888 |
Coupled thermal simulation of hydrogen storage tank-Dewar flask system
Xiao JS, Zhou TT, Cossement D, Benard P, Chahine R |
| 10889 - 10895 |
Improvement of heat transfer model for adsorptive hydrogen storage system
Xiao JS, Yang H, Cossement D, Benard P, Chahine R |
| 10896 - 10902 |
Analysis of adsorption equilibrium of hydrogen on graphene sheets
Zheng QR, Ji XW, Gao S, Wang XH |
| 10903 - 10911 |
Hydrogen absorption cracking of zirconium alloy in the application of nuclear industry
Zhao C, Song XP, Yang Y, Zhang B |
| 10912 - 10918 |
Enhanced reversible hydrogen storage properties of a Mg-In-Y ternary solid solution
Luo FP, Wang H, Ouyang LZ, Zeng MQ, Liu JW, Zhu M |
| 10919 - 10925 |
Effect of Al on the hydrogen storage properties of Mg(BH4)(2)
Jiang JJ, Wei J, Leng HY, Li Q, Chou KC |
| 10926 - 10931 |
Effect of Al content on structure and electrochemical properties of LaNi4.4 (-) xCo0.3Mn0.3Alx hydrogen storage alloys
Balogun MS, Wang ZM, Chen HX, Deng JQ, Yao QR, Zhou HY |
| 10932 - 10938 |
Improving hydrogen storage properties of MgH2 by addition of alkali hydroxides
Wang H, Zhang J, Liu JW, Ouyang LZ, Zhu M |
| 10939 - 10943 |
Hydrogen storage properties of flexible and porous La0.8Mg0.2Ni3.8/PVDF composite
Zhao ZY, Qin M, Jia YY, Chai YJ, Hou DL, Wang N |
| 10944 - 10949 |
Synthesis and hydrogen storage properties of lithium borohydride amidoborane complex
Chen J, He T, Wu GT, Xiong ZT, Chen P |
| 10950 - 10955 |
Synthesis and hydrogen-storage performance of interpenetrated MOF-5/MWCNTs hybrid composite with high mesoporosity
Jiang H, Feng YF, Chen M, Wang YR |
| 10956 - 10962 |
Experimental and numerical study on temperature rise within a 70 MPa type III cylinder during fast refueling
Zheng JY, Guo JX, Yang J, Zhao YZ, Zhao L, Pan XM, Ma JX, Zhang LF |
| 10963 - 10970 |
Experimental and numerical investigation of localized fire test for high-pressure hydrogen storage tanks
Zheng JY, Ou KS, Hua ZL, Zhao YZ, Xu P, Hu J, Han B |
| 10971 - 10977 |
Solvothermal synthesis and growth mechanism of Sb2Se3 nanoplates with electrochemical hydrogen storage ability
Jin RC, Chen G, Xu HM, Chen DH |
| 10978 - 10984 |
The performance improvement of membrane and electrode assembly in open-cathode proton exchange membrane fuel cell
Wu BB, Li B, Liu WM, Liu JG, Zhao M, Yao YF, Gu J, Zou ZG |
| 10985 - 10991 |
The effects of operating temperature on current density distribution and impedance spectroscopy by segmented fuel cell
Tang WC, Lin R, Weng YM, Zhang JM, Ma JX |
| 10992 - 10997 |
Direct NaBH4-H2O2 fuel cell based on nanoporous gold leaves
Jin W, Liu JG, Wang YT, Yao YF, Gu J, Zou ZG |
| 10998 - 11003 |
Ordered porous carbon as the catalyst support for proton-exchange membrane fuel cells
Hsueh YJ, Yu CC, Lee KR, Tseng CJ, Su BJ, Wu SK, Weng LC |
| 11004 - 11010 |
Influence of cathode process on the performance of lithium-air batteries
Ma Z, Yuan XX, Sha HD, Ma ZF, Li Q |
| 11011 - 11016 |
A polymer electrolyte fuel cell life test using accelerating degradation technique
Liu MY, Wang C, Xie FC, Mao ZQ |
| 11017 - 11022 |
Sensitivity study of process parameters in membrane electrode assembly preparation and SO2 depolarized electrolysis
Xue LL, Zhang P, Chen SZ, Wang LJ, Wang JC |
| 11023 - 11027 |
Investigation of ionic liquid composite electrolyte for lithium-oxygen battery
Cai KD, Pu WH, Gao Y, Hou JB, Deng CS, Wang C, Mao ZQ |
| 11028 - 11037 |
Three-dimensional transient modeling and analysis of two-phase mass transfer in air-breathing cathode of a fuel cell
Guo H, Chen YP, Xue YQ, Ye F, Ma CF |
| 11038 - 11044 |
A cross-linked fluorinated poly (aryl ether oxadiazole) s using a thermal cross-linking for anion exchange membranes
Li CP, Wang SB, Wang WP, Xie XF, Lv YF, Deng CS |
| 11045 - 11052 |
Synthesis and characterization of a fluorinated cross-linked anion exchange membrane
Wang WP, Wang SB, Li WW, Xie XF, Lv YF |
| 11053 - 11059 |
Phosphoric acid doped composite membranes from poly (2,5-benzimidazole) (ABPBI) and CsxH3-xPW12O40/CeO2 for the high temperature PEMFC
Qian W, Shang YM, Wang SB, Xie XF, Mao ZQ |
| 11060 - 11066 |
Fabrication and electrochemical performance of Poly (2,5-benzimidazole) (ABPBI)-based MEA by catalyst coated membrane (CCM) method for high-temperature polymer electrolyte fuel cells
Wang SB, Shang YM, Wang YW, Wang JH |
| 11067 - 11073 |
Synthesis and characterization of anion exchange membranes based on poly(arylene ether sulfone)s containing various cations functioned tetraphenyl methane moieties
Li XH, Yu YF, Liu QF, Meng YZ |
| 11074 - 11079 |
High performance of polyoxometalate/PtPd nanoparticles/carbon nanotubes electrocatalysts for the methanol electrooxidation
Hong LJ, Gui YH, Lu J, Hu JG, Yuan JH, Niu L |
| 11080 - 11084 |
Platinum nanoparticles supported on pore-arrayed tungsten trioxide as electrocatalyst for methanol oxidation
Wu W, Xiang XD, Lin YL, Li WS |
| 11085 - 11089 |
Preparation and characterization of La0.9Sr0.1Ga0.8Mg0.2O2.85-(Li/Na)(2)CO3 composite electrolytes
Xie FC, Wang C, Mao ZQ, Zhan ZL |
| 11090 - 11096 |
Effects of tantalum content on the structure stability and oxygen permeability of BaCo0.7Fe0.3-xTaxO3-delta ceramic membrane
Liu JZ, Cheng HW, Jiang B, Lu XG, Ding WZ |
| 11097 - 11103 |
Strontium doping effect on phase homogeneity and conductivity of Ba1-xSrxCe0.6Zr0.2Y0.2O3-delta proton-conducting oxides
Lee KR, Tseng CJ, Chang JK, Hung IM, Lin JC, Lee SW |
| 11104 - 11109 |
Performance and methane production characteristics of H2O-CO2 co-electrolysis in solid oxide electrolysis cells
Li WY, Wang HJ, Shi YX, Cai NS |
| 11110 - 11116 |
Effects of temperature and ferrous sulfate concentrations on the performance of microbial fuel cell
Wei LL, Han HL, Shen JQ |
| 11117 - 11123 |
Hydrogen production with effluent from an anaerobic baffled reactor (ABR) using a single-chamber microbial electrolysis cell (MEC)
Wu TT, Zhu GF, Jha AK, Zou R, Liu L, Huang X, Liu CX |
| 11124 - 11130 |
Electrical analysis of compost solid phase microbial fuel cell
Wang CT, Liao FY, Liu KS |
| 11131 - 11137 |
Application of aluminum-alloy mesh composite carbon cloth for the design of anode/cathode electrodes in Escherichia coli microbial fuel cell
Chen YM, Wang CT, Yang YC, Chen WJ |
| 11138 - 11143 |
Development of a small fuel cell underwater vehicle
Shih NC, Weng BJ, Lee JY, Hsiao YC |
| 11144 - 11148 |
Experimental tests of an air-cooling hydrogen fuel cell hybrid electric scooter
Shih NC, Lin CL, Chang CC, Wang DY |
| 11149 - 11155 |
Numerical investigation on the combustion process in a spark-ignited engine fueled with hydrogen-gasoline blends
Ji CW, Liu XL, Gao BB, Wang SF, Yang JX |
| 11156 - 11163 |
Pressure fluctuations in a hydrogen supply system during hydrogen injection
Sun BG, Zhang DS, Liu FS |
| 11164 - 11168 |
The experimental study on cyclic variation in a spark ignited engine fueled with biogas and hydrogen blends
Zhang X, Xu J, Zheng SZ, Hou XS, Liu JH |
| 11169 - 11173 |
Experimental study on combustion and emissions performance of a hybrid syngas-gasoline engine
Ji CW, Dai XX, Wang SF, Liang C, Ju BJ, Liu XL |
| 11174 - 11180 |
Comparison of the harm effects of accidental releases: Cryo-compressed hydrogen versus natural gas
Li ZY, Pan XM, Sun K, Ma JX |
| 11181 - 11187 |
Influence of low temperature prestrain on hydrogen gas embrittlement of metastable austenitic stainless steels
Zhang L, Li ZY, Zheng JY, Zhao YZ, Xu P, Liu XX, Zhou CL, Li X |
