| 2561 - 2570 |
Free radical polymerization of methyl methacrylate: Modeling and simulation under semibatch and nonisothermal reactor conditions
Curteanu S, Bulacovschi V |
| 2571 - 2575 |
Structural changes and their effect on mechanical properties of silk fibroin/chitosan blends
Park SJ, Lee KY, Ha WS, Park SY |
| 2576 - 2587 |
Binary blends of poly(vinyl chloride) stabilized by lithium acetate-thermal studies
Pielichowski K |
| 2588 - 2593 |
Synthesis and photoluminescence of the Eu3+ composite with dibenzoylmethane and oligoacrylic acid
Tang B, Jin LP, Zheng XJ, Yang MS |
| 2594 - 2604 |
Morphology and enzymatic degradation of thermoplastic starch-polycaprolactone blends
Vikman M, Hulleman SHD, Van der Zee M, Myllarinen P, Feil H |
| 2605 - 2610 |
Synthesis, characterizations, and physical properties of carbon nanotubes coated by conducting polypyrrole
Fan JH, Wan MX, Zhu DB, Chang BH, Pan ZW, Xe SS |
| 2611 - 2615 |
Tribological properties of micron silicon carbide filled poly(ether ether ketone)
Wang QH, Xue QJ, Liu WM, Shen WC |
| 2616 - 2624 |
Determination methods of the grafting yield in glycidyl methacrylate-grafted ethylene/propylene/diene rubber (EPDM-g-GMA): Correlation between FTIR and H-1-NMR analysis
Papke N, Karger-Kocsis J |
| 2625 - 2630 |
Rheological characterization of ethylene vinyl acetate copolymers
Arsac A, Carrot C, Guillet J |
| 2631 - 2636 |
Application of the modified polyacrylonitrile fiber with amino-carboxyl-tetrazine groups for the preconcentration of trace heavy metal ions
Liu RX, Li Y, Tang HX |
| 2637 - 2644 |
Photoinduced living cationic polymerization of tetrahydrofuran. II: Synthesis of four-armed star-shaped poly(tetrahydrofuran)
Mah S, Hwang HS, Shin JH |
| 2645 - 2659 |
Development of methanol selective membranes for separation of methanol-methyl tertiary butyl ether mixtures by pervaporation
Ray SK, Sawant SB, Pangarkar VG |
| 2660 - 2666 |
Relationship between pore structure and H-1-NMR relaxation times in TiO2/poly(dimethylsiloxane) and CaCO3/poly(dimethylsiloxane) composite powders
Vichi FM, Galembeck F, Halstead TK, Williams MAK |
| 2667 - 2673 |
Thermoplastic starch/PVAl compounds: Preparation, processing, and properties
Liu ZQ, Feng Y, Yi XS |
| 2674 - 2680 |
Synthesis and electrochemical properties of redox active polyurethanes with ferrocene units in polyether soft segments
Shen QD, Ni SL, Xu HS, Yang CZ |
| 2681 - 2693 |
Mechanical evaluation of propylene polymers under static and dynamic loading conditions
Fasce L, Pettarin V, Bernal C, Frontini P |
| 2694 - 2702 |
Preparation and thermal behavior of random poly(butylene terephthalate/azelate) copolyesters
Lotti N, Finelli L, Munari A, Manaresi P |
| 2703 - 2715 |
Kinetic study of phenolic resin cure by IR spectroscopy
Carotenuto G, Nicolais L |
| 2716 - 2723 |
Compensation effect observed in thermally stimulated depolarization currents analysis of polymers
Dargent E, Kattan M, Cabot C, Lebaudy P, Ledru J, Grenet J |
| 2724 - 2736 |
Mechanical properties of a particle-strengthened polyurethane foam
Goods SH, Neuschwanger CL, Whinnery LL, Nix WD |
| 2737 - 2746 |
Sequential interpenetrating polymer networks from bisphenol A based cyanate ester and bimaleimide: Properties of the neat resin and composites
Nair CPR, Francis T, Vijayan TM, Krishnan K |
| 2747 - 2755 |
Analysis of variation of molecular parameters of natural rubber during vulcanization in conformational tube model. II. Influence of sulfur/accelerator ratio
Cerveny S, Marzocca AJ |
| 2756 - 2763 |
Studies on dynamic and static crosslinking of ethylene vinyl acetate and ethylene propylene diene tercopolymer blends
Mishra S, Baweja B, Chandra R |
| 2764 - 2772 |
Preparation of cellulose derivatives containing carbazole chromophore
Mao LJ, Ritcey AM |
| 2773 - 2782 |
Shear and extensional investigations in solutions of grafted/ungrafted amylopectin and polyacrylamide
Stelter M, Wunderlich T, Rath SK, Brenn G, Yarin AL, Singh RP, Durst F |
