| 2653 - 2661 |
Synthesis and characterization of side-chain liquid-crystalline polyacrylates containing azobenzene moieties
Silong S, Lutfor MR, Ab Rahman MZ, Yunus WMZW, Haron MJ, Ahmad MB, Yusoff WMDW |
| 2662 - 2669 |
Synthesis and characterization of electrically conducting copolymer of aniline and o-bromoaniline using methane sulfonic acid as dopant
Roy BC, Gupta MD, Bhowmik L, Ray JK |
| 2670 - 2676 |
Synthesis and phase behavior of chiral side-chain liquid-crystalline polysiloxanes containing two mesogenic groups
Hu JS, Zhang BY, Liu ZJ, Zang BL |
| 2677 - 2681 |
Preparation and characterization of dihydroxyl mesocyclic diamine derivative of chitosan
Yang ZK, Li J |
| 2682 - 2686 |
Synthesis and properties of polyether with short alternating conjugated and nonconjugated blocks containing oxadiazole units
Meng FB, Zhang BY, Zhi J, Guan Y, Jia YG |
| 2687 - 2692 |
Nitroxide-mediated radical polymerization of 4-vinylpyridine and its application on modification of silicon substrate
Chen ZJ, Cai J, Jiang XQ, Yang CZ |
| 2693 - 2700 |
Synthesis and flocculation properties of N-oxide polymers
Anleu E, Cardoso J, Manero O |
| 2701 - 2706 |
Diffusion and sorption behavior of glycidyl methacrylate in styrene butadiene rubber
Hwang KK, Ryu SH, Hong SU |
| 2707 - 2712 |
EU3+ complex/polyimide nanocomposites: Improvement in mechanical and thermal properties
Bian LJ, Qian XF, Yin J, Zhu ZK, Lu QH |
| 2713 - 2719 |
Mixed radiation field effects from a nuclear reactor on poly(aryl ether ether ketone): A melt viscosity study
Page DJYS, Bonin HW, Bui VT, Bates PJ |
| 2720 - 2726 |
Effect of the tacticity of poly(methyl methacrylate) on the phase diagram of its ternary blends
Hsu WP |
| 2727 - 2731 |
Preparation and properties of water-soluble polyester surfactants. I. Preparation and surface activity of poly(ethylene glycol)-dimethyl 5-sulfo-isophthalate sodium salt polyester surfactants
Lin LH, Chiang CY, Liu HJ, Chen KM |
| 2732 - 2736 |
Polymer microspheres with surface chains prepared by dispersion copolymerization using poly(oxyethylene) macromonomer
Wang PH, Pan CY |
| 2737 - 2741 |
Electrochemistry of the films of a novel class C-60 covalently linked PPV derivative: Electrochemical quartz crystal microbalance study in acetonitrile solutions of tetra-n-butylammonium cations
Liu Y, Fan LZ, Li YF, Xiao SX, Li YL |
| 2742 - 2747 |
Synthesis and characterization of chitosan alkyl carbamates
Cardenas G, Paredes JC, Cabrera G, Casals P |
| 2748 - 2754 |
Continuous emulsion polymerization of vinyl acetate. I. Operation in a single continuous stirred tank reactor using sodium lauryl sulfate as emulsifier
Nomura M, Sasaki S, Xue W, Fujita K |
| 2755 - 2762 |
Continuous emulsion polymerization of vinyl acetate. II Operation in a single Couette-Taylor vortex flow reactor using sodium lauryl sulfate as emulsifier
Xue W, Yoshikawa K, Oshima A, Sato S, Nomura M |
| 2763 - 2774 |
Synthesis and properties of poly(amide imide)s based on 2,2'-or 4,4'-bis(4-aminophenoxy)biphenyl and various bis(trimellitimide)s
Yang CP, Liou GS, Jeng SH, Chen RS |
| 2775 - 2780 |
Effects of reprocessing on the structure and mechanical properties of poly(trimethylen terephthalate)
Ramiro J, Eguiazabal JI, Nazabal J |
| 2781 - 2787 |
Factors affecting the interfacial polymerization of polyamide active layers for the formation of polyamide composite membranes
Jegal J, Min SG, Lee KH |
| 2788 - 2801 |
Mechanical properties of films prepared from model high-glass-transition-temperature/low-glass-transition-temperature latex blends
Tang JS, Daniels ES, Dimonie VL, Vratsanos MS, Klein A, El-Aasser MS |
| 2802 - 2810 |
Recalculation of the monomer reactivity and experimental differences in emulsion and microemulsion copolymerizations of partially water-soluble monomers
Bhawal S, Devi S |
| 2811 - 2815 |
Effect of the thermal treatment of ionomer films on permeability and permselectivity
Al-Ati T, Hotchkiss JH |
| 2816 - 2819 |
Improvement of the compatibility of natural rubber/ethylene-propylene diene monomer rubber blends via natural rubber epoxidation
El Sayed AM, Afifi H |
| 2820 - 2827 |
Proton-conductive membranes of sulfonated polyphenylsulfone
Dyck A, Fritsch D, Nunes SP |
| 2828 - 2838 |
Supramolecular morphology of two-step, melt-spun poly(lactic acid) fibers
Cicero JA, Dorgan JR, Janzen J, Garrett J, Runt J, Lin JS |
| 2839 - 2846 |
Effects of molecular architecture on two-step, melt-spun poly(lactic acid) fibers
Cicero JA, Dorgan JR, Garrett J, Runt J, Lin JS |
| 2847 - 2853 |
Separation of humic acid with nanofiltration polyamide composite membranes
Hwang JE, Jegal J, Lee KH |
| 2854 - 2859 |
Properties of modified poly(vinyl alcohol) membranes prepared by the grafting of new polyelectrolyte copolymers for water-ethanol mixture separation
Chiang WY, Lin YH |
| 2860 - 2865 |
Evolution of interactions between water and native corn starch as a function of moisture content
Brouillet-Fourmann S, Carrot C, Lacabanne C, Mignard N, Samouillan V |
| 2866 - 2872 |
Novel polyisobutylene stars. XXIII. Thermal, mechanical, and processing characteristics of poly(phenylene ether)/polydivinylbenzene(polyisobutylene-b-polystyrene)(37) blends
Asthana S, Kennedy JP |
| 2873 - 2886 |
Structure development and interfacial interactions in high-density polyethylene/hydroxyapatite (HDPE/HA) composites molded with preferred orientation
Sousa RA, Reis RL, Cunha AM, Bevis MJ |
| 2887 - 2897 |
Rheological properties of ionically crosslinked poly(propylene)-type thermoplastic elastomers
Fujiyama M, Yamane K, Ayama K, Inata H |
| 2898 - 2906 |
Films of PLLA/PHBV: Thermal, morphological, and mechanical characterization
Ferreira BMP, Zavaglia CAC, Duek EAR |
| 2907 - 2915 |
Tensile properties, morphology, and biodegradability of blends of starch with various thermoplastics
Park HM, Lee SR, Chowdhury SR, Kang TK, Kim HK, Park SH, Ha CS |
| 2916 - 2919 |
Biodegradable block copolymers with poly(ethylene oxide) and poly(glycolic acid-valine) blocks
Feng YK, Klee D, Hocker H |
