| 2317 - 2325 |
Crack-resistance behavior of polypropylene copolymers
Grellmann W, Seidler S, Jung K, Kotter I |
| 2326 - 2330 |
Toughening of a high-temperature polymer by the sol-gel, in situ generation of a rubbery silica-siloxane phase
Zhou W, Mark JE, Unroe MR, Arnold FE |
| 2331 - 2339 |
Studies on new type of phenolic resin (IX) curing reaction of bisphenol A-based benzoxazine with bisoxazoline and the properties of the cured resin. II. Cure reactivity of benzoxazine
Kimura H, Taguchi S, Matsumoto A |
| 2340 - 2348 |
Continuous ultrasonic devulcanization of carbon black-filled NR vulcanizates
Hong CK, Isayev AI |
| 2349 - 2353 |
A new method for the determination of a hydrosilanization inhibitor applied to measurements during curing of a silicone elastomer
Karlsson A, Albertsson AC |
| 2354 - 2359 |
DSC valuation of PRI of raw natural rubber
Bonfils F, Laigneau JC, Sylla S, Sainte Beuve J |
| 2360 - 2379 |
Modeling and experimental studies of emulsion copolymerization systems. I. Experimental results
Araujo O, Giudici R, Saldivar E, Ray WH |
| 2380 - 2397 |
Modeling and experimental studies of emulsion copolymerization systems. II. Styrenics
Saldivar E, Araujo O, Giudici R, Lopez-Barron C |
| 2398 - 2407 |
Comparison of carboxylated and maleated polypropylene as reactive compatibilizers in polypropylene/polyamide-6,6 blends
Bohn CC, Manning SC, Moore RB |
| 2408 - 2424 |
Study on preparation of monodispersed poly(styrene-co-N-dimethylaminoethyl methacrylate) composite microspheres by SPG (Shirasu porous glass) emulsification technique
Ma GH, Nagai M, Omi S |
| 2425 - 2430 |
Photovoltaic effect in polymer-semiconductor heterojunction
Bakr NA |
| 2431 - 2438 |
Synthesis and molecular weight characterization of rubber seed oil-modified alkyd resins
Aigbodion AI, Pillai CKS |
| 2439 - 2448 |
Cavitation during isothermal crystallization of isotactic polypropylene
Nowacki R, Kolasinska J, Piorkowska E |
| 2449 - 2455 |
Formation of porous poly(ethylene-co-vinyl alcohol) membrane via thermally induced phase separation
Matsuyama H, Iwatani T, Kitamura Y, Tearamoto M, Sugoh N |
| 2456 - 2463 |
Solute rejection by poly(ethylene-co-vinyl alcohol) membrane prepared by thermally induced phase separation
Matsuyama H, Iwatani T, Kitamura Y, Tearamoto M, Sugoh N |
| 2464 - 2470 |
Synthesis and properties of natural rubber modified with stearyl methacrylate and divinylbenzene by graft polymerization
Zhou MH, Hoang T, Kim IG, Ha CS, Cho WJ |
| 2471 - 2479 |
Characteristics of the nanofiltration composite membranes based on PVA and sodium alginate
Jegal J, Oh NW, Park DS, Lee KH |
| 2480 - 2493 |
Modeling and analysis of a slurry reactor system for heterogeneous olefin polymerization: The effects of hydrogen concentration and initial catalyst size
Ha KS, Yoo KY, Rhee HK |
| 2494 - 2502 |
Irradiation of highly oriented polyethylene fibers in the atmosphere of some vinyl monomers: Effect on compressive strength
Amornsakchai T, Wangsoub S, Bualek-Limcharoen S |
| 2503 - 2508 |
Effect of thermal aging on electrical conductivity of the 2-acrylamido-2-methyl-1-propanesulfonic acid-doped polyaniline fiber
Zhou J, Tzamalis G, Zaidi NA, Comfort NP, Monkman AP |
