| 3191 - 3196 |
Platelet adhesion on laser-induced acrylic acid-grafted polyethylene terephthalate
Mirzadeh H, Dadsetan M, Sharifi-Sanjani N |
| 3197 - 3204 |
Kinetics of esterification of cycloaliphatic epoxies with methacrylic acid
Srivastava A, Agrawal S, Rai JSP |
| 3205 - 3209 |
Light-scattering study on porous membrane formation by dry-cast process
Matsuyama H, Tachibana M, Maki T, Teramoto M |
| 3210 - 3225 |
Melt rheology and morphology of LLDPE/EVA blends: Effect of blend ratio, compatibilization, and dynamic crosslinking
Moly KA, Oommen Z, Bhagawan SS, Groeninckx G, Thomas S |
| 3226 - 3245 |
Method for quantitative evaluation of kinetic constants in olefin polymerizations. II. Kinetic study of a high-activity Ziegler-Natta catalyst used for bulk propylene polymerizations
Matos V, Neto AGM, Nele M, Pinto JC |
| 3246 - 3249 |
Synthesis and characterization of BTDA-based dimethacrylate dental adhesive monomer and its interaction with Ca2+ ions
Atai M, Nekoomanesh M, Hashemi SA, Yeganeh H |
| 3250 - 3255 |
Ceric ammonium nitrate-initiated graft copolymerization of acrylamide onto Cassia tora gum
Sharma BR, Kumar V, Soni PL |
| 3256 - 3263 |
Accelerated cure of phenol-formaldehyde resins: Studies with model compounds
Conner AH, Lorenz LF, Hirth KC |
| 3264 - 3270 |
Synthesis and characterization of photosensitive copolymers of 4-(4'-nitrocinnamoyl)phenyl acrylate and glycidyl methacrylate
Subramanian K, Reddy AVR |
| 3271 - 3285 |
In situ syntheses of a suspension agent based on a styrene-acrylic acid copolymer for the suspension polymerization of styrene
Vilchis L, Rios L, Villalobos MA, Guyot A |
| 3286 - 3299 |
Effect of thiophosphoryl compounds as accelerators and coupling agents on the vulcanization of NR-XNBR blend
Naskar N, Debnath SC, Basu DK |
| 3300 - 3311 |
Thermal degradation and combustion of polymeric blends
Lomakin SM, Koverzanova EV, Usachev SV, Shilkina NG, Zaikov GE |
| 3312 - 3315 |
The ring-opening polymerization of D,L-lactide catalyzed by new complexes of Cu, Zn, Co, and Ni Schiff base derived from salicylidene and L-aspartic acid
Sun JQ, Shi WL, Chen DY, Liang CF |
| 3316 - 3321 |
Novel copolymers for electroluminescent devices
Wang HQ, Li XY |
| 3322 - 3330 |
Surface modification with waterborne fluorinated anionic polyurethane dispersions
Lim CH, Choi HS, Noh ST |
| 3331 - 3335 |
Effect of poly(vinyl chloride) resin type in the preparation process of slush powder
Luo YX, Dai G |
| 3336 - 3345 |
Thermally induced microstructural changes in cotton fibers: A free-volume study
Ranganathaiah C |
| 3346 - 3354 |
Metal-chelated polyamide hollow fibers for human serum albumin separation
Uzun L, Denizli A |
| 3355 - 3367 |
Melt versus solvent coating: Structure and properties of block-copolymer-based pressure-sensitive adhesives
O'Connor AE, Macosko CW |
| 3368 - 3376 |
Surface migration of carboxylic acid in styrene-butadiene rubber and its tribological consequences
Bielinski D, Glab P, Slusarski L, Boiteux G, Chap JP |
| 3377 - 3388 |
Initiation and development of the heat-affected zone in the vibration welding of polyvinylidene fluoride and its copolymers
Valladares D, Cakmak M |
| 3389 - 3395 |
Atomic force microscopy of cellulose membranes prepared from the N-methylmorpholine-N-oxide/water solvent system
Zhang YP, Shao HL, Hu XC |
| 3396 - 3407 |
Headspace solid-phase microextraction with gas chromatography/mass spectrometry reveals a correlation between the degradation product pattern and changes in the mechanical properties during the thermooxidation of in-plant recycled polyamide 6,6
Groning M, Hakkarainen M |
| 3408 - 3411 |
Pervaporation of methanol/methyl tert-butyl ether mixtures through agarose/hydroxyethylcellulose blended membranes
Yoshikawa M, Yoshioka T, Fujime J, Murakami A |
| 3412 - 3419 |
Acidic and basic hydrolysis of poly(N-vinylformamide)
Gu L, Zhu S, Hrymak AN |
| 3420 - 3424 |
Radiation effects on poly(propylene) (PP)/ethylene-vinyl acetate copolymer (EVA) blends
Dalai S, Chen WX |
| 3425 - 3429 |
Mechanical properties of silk fibroin-microcrystalline cellulose composite films
Noishiki Y, Nishiyama Y, Wada M, Kuga S, Magoshi J |
| 3430 - 3439 |
Thermal behavior and morphological and rheological properties of polypropylene and novel elastomeric ethylene copolymer blends
Di YW, Iannace S, Nicolais L |
| 3440 - 3444 |
Retention of gallium ions from acidic solutions by pyridine strong-base anion exchangers
Dulman V, Buhaceanu R, Luca C, Neagu V |
| 3445 - 3453 |
Reactive melt blending of modified polyamide and polypropylene: Assessment of compatibilization by fractionated crystallization and blend morphology
Pompe G, Potschke P, Pionteck J |
| 3454 - 3459 |
Antiwear and lubrication properties of polyurethane/polytetrafluoroethylene-bonded coating
Tian J, Huang YL |
