| 3459 - 3465 |
Surface plasmon resonance spectroscopic comparison of spiroxazine monolayer and polymeric thin film
Hur Y, Lee M, Jin SH, Gal YS, Kim JH, Kim SH, Koh K |
| 3466 - 3472 |
New thermoplastic materials reinforced with cellulose based fibers
Rodriguez CA, Medina JA, Reinecke H |
| 3473 - 3480 |
Preparation and characterization of poly(ether ester) thermoplastic elastomers containing the 2,6-naphthalenedicarboxyl group
Ahn TH, Park YH, Kim SH, Baik DH |
| 3481 - 3487 |
Synthesis and properties of the copolymer of acrylamide with 2-acrylamido-2-methylpropanesulfonic acid
Liu Y, Xie JJ, Zhang XY |
| 3488 - 3496 |
Synthesis and characterization of calcium-containing poly(urethane-urea)s
Jayakumar R, Lee YS, Nanjundan S |
| 3497 - 3502 |
A rheological and morphological study of treated PVC
Place S, Fugit JL, Prochazka F, Taverdet JL |
| 3503 - 3511 |
Effect of ultrafine, fully vulcanized acrylate powdered rubber on the mechanical properties and crystallization behavior of nylon 6
Ding XJ, Xu RW, Yu DS, Chen H, Fan R |
| 3512 - 3518 |
Morphology of nylon 6/acrylonitrile-butadiene-styrene blends compatibilized by a methyl methacrylate/maleic anhydride copolymer
Araujo EM, Hage E, Carvalho AJF |
| 3519 - 3525 |
Effect of ultrasound on extrusion of polypropylene/ethylene-propylene-diene terpolymer blend: Processing and mechanical properties
Chen YZ, Cao YR, Li HL |
| 3526 - 3531 |
Effect of degree of deacetylation of chitosan on the kinetics of ultrasonic degradation of chitosan
Tsaih ML, Chen RH |
| 3532 - 3535 |
Effect of aluminum chloride and Pt/TiO2 on the thermal degradation of poly(vinyl chloride) in solution
Gupte SL, Agarwal N, Madras G, Nagaveni K, Hegde MS |
| 3536 - 3545 |
Spinning fibers from poly(ethylene terephthalate) bottle-grade waste
Gurudatt K, De P, Rakshit AK, Bardhan MK |
| 3546 - 3555 |
Kinetics and parameters affecting degradation of purified natural rubber
Phetphaisit CW, Phinyocheep P |
| 3556 - 3562 |
Metal-ion-retention properties of the poly(2-acrylamido-2-methyl-1-propanosulfonic acid-co-4-vinyl pyridine) resin
Rivas BL, Villegas S |
| 3563 - 3568 |
Synthesis and characterization of temperature- and pH-sensitive poly(N,N-diethylacrylamide-co-methacrylic acid)
Liu SX, Liu MZ |
| 3569 - 3577 |
Feasibility of conducting semi-interpenetrating networks based on a poly(ethylene oxide) network and poly(3,4-ethylenedioxythiophene) in actuator design
Vidal F, Popp JF, Plesse C, Chevrot C, Teyssie D |
| 3578 - 3587 |
Polymer hybrids from self-emulsified PU anionomer and water-reducible acrylate copolymer via a postcuring reaction
Lai JZ, Ling HJ, Chen GN, Yeh JT, Chen KN |
| 3588 - 3593 |
Recycling of jute textile in phenol formaldehyde-jute composites
Hassan ML |
| 3594 - 3601 |
Synthesis and thermal degradation of poly(n-butylisocyanate) modified by 1,3-propanesultone
Dereszewska A, Olayo R, Cardoso J |
| 3602 - 3608 |
Dielectric properties of aluminum-epoxy composites
Singh V, Kulkarni AR, Mohan TRR |
| 3609 - 3616 |
Study of self-crosslinking acrylate latex containing fluorine
Chen YJ, Zhang CC, Wang YF, Cheng SY, Chen PZ |
| 3617 - 3624 |
Study on antistatic modification of polyurethane elastomer surfaces by grafting with vinyl acetate and antistatic agent
Zhou XD, Liu PS |
| 3625 - 3630 |
Nanosize polymer latices made by microemulsion copolymerization: Preparation and characterization
Zhang YY, Guo TY, Hao GJ, Song MD, Zhang BH |
| 3631 - 3637 |
High-resolution thermogravimetry of polyethersulfone chips in four atmospheres
Li XG, Shao HT, Bai H, Huang MR, Zhang W |
| 3638 - 3645 |
Tensile fracture and failure behavior of technical flax fibers
Romhany G, Karger-Kocsis J, Czigany T |
| 3646 - 3651 |
Chemical modification of keratin fibers using 2-iminothiorane hydrochloride
Kuzuhara A |
| 3652 - 3659 |
Behavior of poly(methyl methacrylate)-based systems in supercritical CO2 and CO2 plus cosolvent: Solubility measurements and process assessment
Domingo C, Vega A, Fanovich MA, Elvira C, Subra P |
| 3660 - 3667 |
Preparation of poly(acrylic acid)-chitosan hydrogels by gamma irradiation and in vitro drug release
Shim JW, Nho YC |
| 3668 - 3675 |
Efficiency of ultraviolet/ozone treatments in the improvement of the dyeability and light fastness of wool
Micheal MN, El-Zaher NA |
| 3676 - 3682 |
Morphology and properties of soy protein plastics modified with chitin
Zheng H, Tan ZA, Zhan YR, Huang J |
| 3683 - 3689 |
Properties of poly(lactic acid) blends with various starches as affected by physical aging
Wang H, Sun XZ, Seib P |
| 3690 - 3695 |
Tentative study on kinetics of bulk polymerization of methyl methacrylate in presence of montmorillonite
Liu GD, Zhang LC, Qu XW, Wang BT, Zhang Y |
| 3696 - 3707 |
Synthesis, thermal behavior, and cone calorimetry of organophosphorus epoxy materials
Hussain M, Varley RJ, Zenka M, Simon GP |
| 3708 - 3717 |
Polystyrene-supported polyoxyethylene bound potassium permanganate as a heterogeneous oxidizing agent
Chacko A, Mathew B |
| 3718 - 3722 |
Rheological and mechanical properties of natural rubber reinforced with agricultural byproduct
Imanah JE, Okieimen FE |
| 3723 - 3729 |
Synthesis of poly(p-diphenylmethylterephthalamide) from recycled monomers
Norakankorn C, Chuayjuljit S, Pimpan V |
| 3730 - 3736 |
XPS study of aged polyaniline films
Jousseaume V, Morsli M, Bonnet A |
| 3737 - 3740 |
Stud on propene polymerization using a novel spherical Ziegler-Natta catalyst and its kinetics
Ye ZY, Wang L, Jiang S |
| 3741 - 3746 |
Preparation and swelling behavior of biodegradable hydrogels based on alpha,beta-poly(N-2-hydroxyethyl-DL-aspartamide)
Yoon SW, Chung DJ, Kim JH |
