| 795 - 811 |
Spinnability and physical properties of in situ composite fibers based on thermotropic liquid crystalline polymer
He XJ, Ellison MS, Paradkar RP |
| 812 - 820 |
Improvement in the adhesion of polyimide/epoxy joints using various curing agents
Kim SH, Lee DW, Chung KH, Park JK, Jaung JY, Jeong SH |
| 821 - 843 |
Properties and toughening of heat-resistant thermosets based on unsaturated ester resins
Canelas DA, Abbey KJ, Fentress E |
| 844 - 851 |
Semicontinuous emulsion polymerization of vinyl acetate: Effect of ethoxylation degree of nonionic emulsifiers
Sarac A, Erbil HY, Yildirim H |
| 852 - 863 |
Rheology of polyflavonoid tannin-formaldehyde reactions before and after gelling. I. Methods
Garnier S, Pizzi A, Vorster OC, Halasz L |
| 864 - 871 |
Rheology of polyflavonoid tannin-formaldehyde reactions before and after gelling. II. Hardener influence and comparison of different Tannins
Garnier S, Pizzi A, Vorster OC, Halasz L |
| 872 - 880 |
Biodegradable polymers based on renewable resources. VI. Synthesis and biodegradability of poly(ester carbonate)s containing 1,4 : 3,6-dianhydro-D-glucitol and sebacic acid units
Okada M, Yokoe M, Aoi K |
| 881 - 890 |
Challenges in forming successful mixed matrix membranes with rigid polymeric materials
Mahajan R, Burns R, Schaeffer M, Koros WJ |
| 891 - 900 |
Influence of particle surface properties on film formation from precipitated calcium carbonate/latex blends
Tang JS, Daniels ES, Dimonie BVL, Klein A, El-Aasser MS |
| 901 - 906 |
Fundamental adsorption properties of chitosan gel particles prepared by suspension evaporation method
Igarashi K, Nakano Y |
| 907 - 916 |
Modified cellulose fibers prepared by the N-methylmorpholine-N-oxide (NMMO) process
Niekraszewicz B, Czarnecki P |
| 917 - 924 |
The rheological behavior of immiscible polymer blends
Choi GY, Kim HG, Kim YH, Seo CW, Choi JH, Han DH, Oh DH, Min KE |
| 925 - 936 |
Plasma-induced surface modification and adhesion enhancement of polypropylene surface
Bhat NV, Upadhyay DJ |
| 937 - 947 |
Comparison of polycarbonate precursors synthesized from catalytic reactions of bisphenol-A with diphenyl carbonate, dimethyl carbonate, or carbon monoxide
Kim WB, Lee JS |
| 948 - 956 |
Poly(ethylene glycol) electrolyte gels prepared by condensation reaction
Koo J, Kim D |
| 957 - 961 |
Thermal degradation kinetics of para-substituted poly (styrene peroxide)s in solution
De P, Chattopadhyay S, Madras G, Sathyanarayana DN |
| 962 - 972 |
Intermolecular and intramolecular hydrogen bonding of poly(dimethylsiloxane)urethane-graft-poly(methyl methacrylate) copolymers based on 2,4-TDI and m-XDI
Ma CCM, Wang FY, Du YC, Wu CL, Chiang CL, Hung AYC |
| 973 - 983 |
Self-affine fractal scaling in fracture in ethylene and propylene polymers surfaces generated and copolymers
Lapique F, Meakin P, Feder J, Jossang T |
| 984 - 992 |
Preparation and characterization of novolac type phenolic resin blended with poly(dimethylsiloxane adipamide)
Hung AYC, Wang FY, Ma CCM, Sun YM |
| 993 - 1008 |
Optimal reaction conditions for the minimization of energy consumption and by-product formation in a poly(ethylene terephthalate) process
Ha KS, Rhee HK |
| 1009 - 1022 |
Nonisothermal bulk crystallization of high-density polyethylene via a modified depolarized light microscopy technique: Further analysis
Supaphol P, Spruiell JR |
| 1023 - 1037 |
Studies on photosensitive homopolymer and copolymers having a pendant photocrosslinkable functional group
Balaji R, Nanjundan S |
| 1038 - 1045 |
Synthesis and characterization of functionalized syndiotactic polystyrene copolymers
Li CL, Chan SH, Ting C, Jiang GJ |
| 1046 - 1046 |
Synthesis and characterization of block copolymers containing PC segments and PHTH-6 mesogenic units (vol 86, pg 1046, 2002)
Zhao XY, Hu X, Yue CY, Zhang HQ, Zhou QX |
