| 4085 - 4091 |
Properties and morphology of bioceramics/poly(D,L-lactide) composites modified by in situ compatibilizing extrusion
Liu F, Jin Y, Lin XD, Jia DM |
| 4092 - 4100 |
Effect of spin finish on fiber/binder adhesion in chemically bonded nonwovens
Fourdrin S, Rochery M, Gengembre L, Rumeau P, Lewandowski M, Ferreira M, Bourbigot S |
| 4101 - 4110 |
Light-colored fluorinated polyimides based on 2,5-bis(4-amino-2-trifluoromethylphenoxy)biphenyl and various aromatic dianhydrides
Yang CP, Su YY, Chen YC |
| 4111 - 4115 |
Thermal and physical properties of allyl PPO and its composite
Wang LH, Xu QY, Chen DH, Yuan YH, Tang WJ, Wang LL |
| 4116 - 4120 |
ESR study of hydroxyl alkoxyamine (HMPAP) in DMF and tert-butylbenzene
Yin MZ, Krause T, Habicher WD |
| 4121 - 4126 |
Pyrrole chemical polymerization on textiles: Kinetics and operating conditions
Ferrero F, Napoli L, Tonin C, Varesano A |
| 4127 - 4135 |
Synthesis and properties of organosoluble polyimides derived from bis(4-amino-3, 5-dimethyl phenyl) halo phenyl methane and various dianhydrides
Hariharan R, Sarojadevi M |
| 4136 - 4143 |
Application of DMEU/SiO2 gel solution in the antiwrinkle finishing of cotton fabrics
Huang KS, Nien YH, Hsiao KC, Chang YS |
| 4144 - 4148 |
Percolation threshold of electrically conductive master batch for polyester fibers application
Jin X, Xiao CF, An SL, Jia GX |
| 4149 - 4156 |
Thermal degradation kinetics of rigid polyurethane foams blown with water
Li XB, Cao HB, Zhang Y |
| 4157 - 4164 |
Dynamic mechanical properties in blends of poly(styrene-b-isoprene-b-styrene) with aromatic hydrocarbon resin
Wu CY, Wu GZ, Wu CF |
| 4165 - 4170 |
Interfacial studies on the surface modified aramid fiber reinforced epoxy composites
Wu J, Cheng XH |
| 4171 - 4176 |
The effect of orientation of various phenols on the degradation kinetics of blends of resole and epoxy
Srivastava K, Kaushik MK, Srivastava D, Tripathi SK |
| 4177 - 4184 |
Microwave-assisted preparation of temperature sensitive poly(N-isopropylacrylamide) hydrogels in poly(ethylene oxide)-600
Shi SH, Liu LJ |
| 4185 - 4193 |
Effect of immobilized neutral protease on the preparation and physicochemical properties of low molecular weight chitosan and chito-oligomers
Li J, Du YM, Liang HB, Yao PJ, Wei YA |
| 4194 - 4206 |
Recycling of NR based cured latex material reclaimed with 2,2'-dibenzamidodiphenyldisulphide in a truck tire tread compound
Rajan VV, Dierkes WK, Joseph R, Noordermeer JWM |
| 4207 - 4212 |
Blended resins based on a new prop argyl-functional resin: Synthesis, cure, and thermal properties
Liu F, Li WW, Wei LH, Zhao T |
| 4213 - 4221 |
Synthesis and characterization of dextran hydrogels prepared with chlor- and nitrogen-containing crosslinkers
Imren D, Gumusderelioglu M, Guner A |
| 4222 - 4227 |
Rheological behavior of polyester blend and mechanical properties of the polypropylene-polyester blend fibers
Marcincin A, Kormendy E, Hricova M, Rusnak A, Aneja AP |
| 4228 - 4237 |
Modeling the chemorheological behavior of epoxy/liquid aromatic diamine for resin transfer molding applications
Naffakh M, Dumon M, Gerard JF |
| 4238 - 4244 |
Copolymers of acrylic acid with 2-acryloyloxyethyl 2,4-dichlorophenoxyacetate: Synthesis and herbicide release
Fernandez-Garcia M, Sanchez-Chaves M |
| 4245 - 4253 |
Controlled release formulations of carbaryl based on copper alginate, barium alginate, and alginic acid beads
Sanli O, Isiklan N |
| 4254 - 4257 |
Free-radical copolymerization kinetics of acrylonitrile and methyl acrylate in [BMIM]BF4
Li D, Zhang YM, Wang HP, Tang JZ, Wang B |
| 4258 - 4263 |
Structure of P(VDF-TrFE) (80/20) copolymers under electron irradiation and recrystallization
Li W, Jiang LM, Zhu YJ, Wang J |
| 4264 - 4268 |
Shrinkage and re-expansion of extruded starch acetate foams
Zhou JH, Hanna M |
| 4269 - 4275 |
Characterization of (PEO)LiClO4-Li1.3Al0.3Ti1.7(PO4)(3) composite polymer electrolytes with different molecular weights of PEO
Wang YJ, Pan Y, Wang L, Pang MJ, Chen LS |
| 4276 - 4283 |
Synthesis and characterization of poly(ethylene glycol dimethacrylate-1-vinyl-1,2,4-triazole) copolymer beads for heavy-metal removal
Uzun L, Kara A, Tuzmen N, Karabakan A, Besirli N, Denizli A |
| 4284 - 4290 |
Curing behavior and thermal mechanical properties of cyanate ester blends
Koh HCY, Dai J, Tan E |
| 4291 - 4303 |
Accelerated aging versus realistic aging in aerospace composite materials. I. The chemistry of thermal aging in a low-temperature-cure epoxy composite
Dao B, Hodgkin J, Krstina J, Mardel J, Tian W |
| 4304 - 4313 |
Preparation and characterization of polystyrene-poly(ethylene oxide) amphiphilic block copolymers via atom transfer radical polymerization: Potential application as paper coating materials
Ibrahim K, Salminen A, Holappa S, Kataja K, Lampinen H, Lofgren B, Laine J, Seppala J |
| 4314 - 4320 |
Novel organic modification of montmorillonite in hydrocarbon solvent using ionic liquid-type surfactant for the preparation of polyolefin-clay nanocomposites
Ding YS, Guo CY, Dong JY, Wang ZG |
| 4321 - 4327 |
Synthesis and properties of novel deep red-emitting copolymers based on a poly(p-phenylenevinylene) derivative
Li XZ, Zeng WJ, Xia YJ, Yang W, Cao Y |
| 4328 - 4340 |
Kinetics study of radiation-grafting of acrylic acid, acrylonitrile, and their mixture onto wool fabric
El-Gendy EH, El-Shanshoury IA |
| 4341 - 4347 |
Adsorption behavior and effectiveness of poly(N,N-dimethylacrylamide-co-Ca 2-acrylamido-2-methylpropanesulfonate) as cement fluid loss additive in the presence of acetone-formaldehyde-sulfite dispersant
Plank J, Brandl A, Zhai YN, Franke A |
| 4348 - 4357 |
Preparation of magnetic poly(glycidyl methacrylate) microspheres by emulsion polymerization in the presence of sterically stabilized iron oxide nanoparticles
Horak D, Chekina N |
| 4358 - 4364 |
Partial substitution of cellulose by ring-opening esterification of cyclic esters in a homogeneous system
Mayumi A, Kitaoka T, Wariishi H |
| 4365 - 4371 |
Rheology of silicon carbide/vinyl ester nanocomposites
Yong V, Hahn HT |
| 4372 - 4377 |
Modification of preparation method for polymer inclusion membrane (PIM) to produce hollow fiber PIM
Kusumocahyo SP, Kanamori T, Iwatsubo T, Sumaru K, Shinbo T, Matsuyama H, Teramoto M |
| 4378 - 4382 |
Preparation and deodorizing performance of a novel air-purifying material
Yao YY, Chen WX, Lu SS |
| 4383 - 4393 |
Self-curable system of an aqueous-based polyurethane dispersion via a ring-opening reaction of azetidine end groups
Wang SC, Chen PC, Yeh JT, Chen KN |
| 4394 - 4403 |
Follow-up of the course of the anionic ring-opening polymerization of lactams onto an isocyanate-bearing polymer backbone in the melt
Hu GH, Li HX, Feng LF |
| 4404 - 4410 |
Enhanced performance in organic light-emitting diodes with copolymers containing both tris(8-hydroxyquinoline) aluminum and 8-hydroxyquinoline lithium groups
Du NY, Tian RY, Peng JB, Mei QB, Lu MG |
| 4411 - 4418 |
Boric acid binding studies with diol containing polyethylenimines as determined by B-11 NMR spectroscopy
Labouriau A, Smith BF, Khalsa GRK, Robison TW |
| 4419 - 4424 |
Effect of composition on aqueous polyurethane dispersions derived from polycarbonatediols
Lee DK, Tsai HB, Tsai RS |
| 4425 - 4429 |
Grafting of maleic anhydride onto styrene-butadiene-styrene triblock copolymer using supercritical CO2 as a swelling agent
Li CS, Zhang SX, Zheng A, Kong XZ, Geng B |
| 4430 - 4439 |
Rheological study of the curing kinetics of epoxy-phenol novolac resin
Auad ML, Nutt SR, Stefani PM, Aranguren MI |
| 4440 - 4446 |
Study of viscosity abnormality of PS/toluene solution in extremely dilute concentration regime
Du DX, Zuo J, An YL, Zhou L, Liu Y |
| 4447 - 4459 |
Green strength enhancement in BIIR/olefin copolymer compounds
Tsou AH, Duvdevani I, Datta S |
| 4460 - 4467 |
Mechanical and morphological properties of recycled high-density polyethylene, filled with calcium carbonate and fly ash
Atikler U, Basalp D, Tihminlioglu F |
| 4468 - 4477 |
Grafting of N-carbamyl maleamic acid onto a styrene-butadiene-styrene copolymer
Lassalle VL, Failla MD, Valles EM |
| 4478 - 4483 |
Viscose fiber/polyamide 12 composites: Novel gas-phase method for the modification of cellulose fibers with an aminosilane coupling agent
Paunikallio T, Suvanto M, Pakkanen TT |
| 4484 - 4487 |
Dynamic mechanical and rheological behavior of fluoroelastomer-organoclay nanocomposites obtained from different preparation methods
Valsecchi R, Vigano M, Levi M, Turri S |
| 4488 - 4492 |
Polymerization of monomers initiated by silyl centers in SiO deposits prepared by pulsed laser ablation
Drinek V, Vacek K, Yuzhakov G, Brus J |
| 4493 - 4499 |
Growth control and long-range self-assembly of poly(methyl methacrylate) nanospheres
D'Amato R, Venditti I, Russo MV, Falconieri M |
| 4500 - 4505 |
Electrochromic properties and electrochromic device application of copolymer of N-(4-(3-thienyl methylene)-oxycarbonylphenyl)maleimide with thiophene
Ak M, Camurlu P, Yilmaz F, Cianga L, Yagci Y, Toppare L |
| 4506 - 4513 |
Weathering, water absorption, and durability of silicon, acetylated, and heat-treated wood
Temiz A, Terziev N, Jacobsen B, Eikenes M |
| 4514 - 4522 |
Rice bran-filled biodegradable low-density polyethylene films: Development and characterization for packaging applications
George J, Kumar R, Jayaprahash C, Ramakrishna A, Sabapathy SN, Bawa AS |
| 4523 - 4527 |
High-resolution measurements of water permeability and solubility in microelectronic-casing made of a hydrophobic polymeric composite
Zimrin T, Haruvy YF, Margel S |
| 4528 - 4534 |
Alginate-coated chitosan membrane for guided tissue regeneration
Chen TW, Chang SJ, Niu GCC, Hsu YT, Kuo SM |
| 4535 - 4545 |
Poly(trimethylene terephthalate) nanocomposite fibers comprising different organoclays: Thermomechanical properties and morphology
Chang JH, Mun MK, Kim JC |
| 4546 - 4553 |
Effect of formulation variables on the prediction of release from microparticles with experimental design
Luzardo-Alvarez A, Almeida-Prieto S, Fraga-Lopez F, Otero-Espinar F, Rodriguez-Nunez E, Martinez-Ageitos J, Blanco-Mendez J |
| 4554 - 4564 |
Polyester composites reinforced with noncrimp stitched carbon fabrics: Mechanical characterization of composites and investigation on the interaction between polyester and carbon fiber
Cecen V, Sarikanat M, Seki Y, Govsa T, Yildiz H, Tavman IH |
| 4565 - 4572 |
Preparation of novel acrylate-based liquid crystalline polymers and the photoinduced alignment behavior of their films
Zhu J, Wu LP, Zhang YY, Jin X, He SJ, Shi KY, Guo XZ, Du ZJ, Zhang BL |
| 4573 - 4576 |
Improved pharmacokinetics and stability properties of catalase by chemical glycosidation with end-group activated dextran
Villalonga R, Valdivia A, Perez Y, Chongo B |
| 4577 - 4583 |
Asymmetric membranes fabricated from poly(acrylonitrile-co-N-vinyl-2-pyrrolidone)s with excellent biocompatibility
Wan LS, Xu ZK, Huang XJ |
| 4584 - 4588 |
One-pot synthesis of polyetherimides from bis(chlorophthalimide) and dichlorodiphenylsulfone in diphenylsulfone
Shang ZP, Lu CL, Zhao JY, Yan JL, Ding MX, Gao LX |
| 4589 - 4594 |
Synthesis and photopolymerization of ethylene glycol 3-morpholine-propionate methacrylate for potential dental composite application
Wu GQ, Shi SQ, Xiao P, Nie J |
| 4595 - 4600 |
Side-chain liquid-crystalline polymers with a limonene-co-methyl methacrylate main chain: Synthesis and characterization of polymers with phenyl benzoate mesogenic groups
Mishra G, Srivastava AK |
| 4601 - 4605 |
Blend films of O-carboxymethyl chitosan and cellulose in N-methylmorpholine-N-oxide monohydrate
Zhuang XP, Liu XF |
| 4606 - 4615 |
Comparing reinforcement strategies for epoxy networks using reactive and non-reactive fortifiers
Calzia KJ, Forcum A, Lesser AJ |
| 4616 - 4622 |
Miniemulsion and conventional emulsion copolymerization of styrene and butadiene: Effect of process on gel content
Li D, Sudol ED, El-Aasser MS |
| 4623 - 4629 |
Chemiluminescence of isotactic polypropylene induced by photo-oxidative degradation and natural weathering
Jipa S, Setnescu R, Zaharescu T, Setnescu T, Kaci M, Touati N |
| 4630 - 4636 |
Studies on interfacial adhesion, tensile and thermal characteristics in blends of polystyrene/novalac resin
Konar BB, Ray SK, Konar PB |
| 4637 - 4645 |
Removal of copper ions from water of boilers by a modified natural based, corncobs
Billon L, Meric V, Castetbon A, Francois J, Desbrieres J |
| 4646 - 4651 |
Effect of the interface with solid on the interfacial region in the blends of linear polymers formed in situ
Lipatov YS, Kosyanchuk LF, Yarovaya NV |
| 4652 - 4658 |
Effects of multiple weak interactions on the binding of phenolic compounds by polymeric adsorbents
Cheng S, Tang H, Yan H |
| 4659 - 4664 |
Preparation and characterization of acrylic resin/titania hybrid nanocomposite coatings by photopolymerization and sol-gel process
Sangermano M, Amerio E, Priola A, Di Gianni A, Voit B |
| 4665 - 4671 |
Swelling of pH-sensitive chitosan-poly(vinyl alcohol) hydrogels
Gunasekaran S, Wang T, Chai CX |
| 4672 - 4681 |
Influence of curing agent and compatibilizer on the physicomechanical properties of polypropylene/nitrile butadiene rubber blends investigated by positron annihilation lifetime technique
Soares BG, Almeida MSM, Urs MVD, Kumaraswamy GN, Ranganathaiah C, Siddaramaiah, Mauler R |
| 4682 - 4689 |
Polymerization of halogenated anilines by plasma
Olayo MG, Enriquez MA, Cruz GJ, Morales J, Olayo R |
| 4690 - 4695 |
Development of conductive cotton fabrics for heating devices
Bhat NV, Seshadri DT, Nate MM, Gore AV |
| 4696 - 4706 |
Aspects of foaming a glass-reinforced polypropylene with chemical blowing agents
Thompson MR, Qin X, Zhang G, Hrymak AN |
| 4707 - 4711 |
Influence of 1,2-unit contents on retraction behaviors of SBR vulcanizates
Choi SS, Cho G |
| 4712 - 4719 |
Thermal, morphological, and mechanical characteristics of polypropylene/polybutylene terephthalate blends with a liquid crystalline polymer or ionomer
Zhang BY, Sun QJ, Li QY, Wang Y |
| 4720 - 4727 |
Effect of partial replacement of di(2-ethyl hexyl)phthalate, by a polymeric plasticizer, on the permeability and leaching properties of poly(vinyl chloride)
Sunny MC, Ramesh P, George KE |
| 4728 - 4733 |
Influence of thermal aging on the electrical properties of poly(vinyl chloride)
Nedjar M, Beroual A, Boubakeur A |
| 4734 - 4740 |
High thermal conductivity epoxy molding compound filled with a combustion synthesized AIN powder
Hsieh CY, Chung SL |
| 4741 - 4748 |
Structural effect of phenalkamines on adhesive viscoelastic and thermal properties of epoxy networks
Pathak SK, Rao BS |
| 4749 - 4758 |
Structure and dynamics of polyethylene/clay films
La Mantia FP, Dintcheva NT, Filippone G, Acierno D |
| 4759 - 4763 |
Effect of the delignification of wood fibers on the mechanical properties of wood fiber-polypropylene composites
Karimi A, Nazari S, Ghasemi I, Tajvidi M, Ebrahimi G |
| 4764 - 4774 |
Multiwavelength interferometry and competing optical methods for the thermal probing of thin polymeric films
Vourdas N, Karadimos G, Goustouridis D, Gogolides E, Boudouvis AG, Tortai JH, Beltsios K, Raptis I |
| 4775 - 4779 |
Isothermal and nonisothermal melt crystallization kinetics of a novel poly(aryl ether ketone ether ketone ketone) containing a meta-phenyl linkage
Qiu ZB, Yang WT |
| 4780 - 4790 |
Biologically active polymers. IV. Synthesis and antimicrobial activity of tartaric acid polyamides
Kenawy ER, Abdel-Hay FI, Shahada L, El-Shanshoury AERR, El-Newehy MH |
| 4791 - 4800 |
Synthesis of macroreticular copolymer beads having various phenolic derivatives immobilized via different bond and their radical scavenging activity
Maeda S, Nonaka T, Ogata T, Kurihara S |
| 4801 - 4808 |
Studies on fly-ash-filled natural rubber modified with cardanol derivatives: Processability, mechanical properties, fracture morphology, and thermal decomposition characteristics
Menon ARR, Sonia TA, Sudha JD |
| 4809 - 4813 |
Effect of aging on synthesis of graft copolymer of EPDM and styrene (EPDM-g-PS)
Wonglert C, Thongyai S, Praserthdam P |
| 4814 - 4822 |
Effect of applied stress on the alkaline hydrolysis of poly(ethylene terephthalate) at 40 degrees C: Relevance to medical textiles
Rahman M, East GC |
| 4823 - 4830 |
Effect of different carbon fillers on the properties of PP composites: Comparison of carbon black with multiwalled carbon nanotubes
Zhou Z, Wang SF, Zhang Y, Zhang YX |
| 4831 - 4834 |
Preparation of high-molecular-weight poly(vinyl alcohol) with high yield by solution polymerization of vinyl acetate in methanol using 4,4'-azobis(4-cyanovaleric acid)
Lyoo WS, Song DH, Lee WC, Han SS, Noh SK |
| 4835 - 4841 |
A comparative study of cardanol and aromatic oil as plasticizers for carbon-black-filled natural rubber
Alexander M, Thachil ET |
| 4842 - 4849 |
Effect of quasi-nanometer zirconium carbide on the physical characterization of zirconium carbide/polyurethane composite films irradiated under ultraviolet light
Tasi HA, Suen MC, Chen CC |
| 4850 - 4855 |
Chemical modification of calcium alginate gel beads for controlling the release of insect repellent N,N-diethyl-3-methylbenzamide
Xiao CM, Zhou M, Lin XD, Li RQ |
| 4856 - 4869 |
Wood-fiber-reinforced poly(lactic acid) composites: Evaluation of the physicomechanical and morphological properties
Huda MS, Drzal LT, Misra M, Mohanty AK |
| 4870 - 4877 |
Electrical behavior of PET films coated with nanostructured organic-inorganic hybrids
Saccani A, Toselli M, Messori M, Fabbri P, Pilati F |
| 4878 - 4885 |
Optimization of synthetic conditions of a novel collagen-based superabsorbent hydrogel by Taguchi method and investigation of its metal ions adsorption
Pourjavadi A, Salimi H, Amini-Fazl MS, Kurdtabar M, Amini-Fazl AR |
| 4886 - 4896 |
Retention of activity of urease immobilized on grafted polymer films
Yamada K, Iizawa Y, Yamada J, Hirata M |
| 4897 - 4907 |
Waste natural gum as a multifunctional additive in rubber
Guhathakurta S, Anandhan S, Singha NK, Chattopadhyay RN, Bhowmick AK |
| 4908 - 4914 |
Synthesis and characterization of functional copolymers of citronellol and acrylamide
Srivastava AK, Pandey P, Mishra G |
| 4915 - 4920 |
Microencapsulation of water-soluble flame retardant containing organophosphorus and its application on fabric
Lin M, Yang Y, Xi P, Chen SL |
| 4921 - 4927 |
Preparation and properties of polyethylene-clay nanocomposites by an in situ graft method
Qi RR, Jin X, Zhou CX |
| 4928 - 4936 |
Characterization of the biocide polyhexamethylene biguanide by matrix-assisted laser desorption ionization time-of-flight mass spectrometry
O'Malley LP, Hassan KZ, Brittan H, Johnson N, Collins AN |
| 4937 - 4942 |
Electrorheological properties of chemically modified chitosan suspension with various functional pendants
Ko YG, Choi US |
| 4943 - 4951 |
Structure and properties of polypropylene composites filled with magnesium hydroxide
Chen XL, Yu J, Guo SY |
| 4952 - 4957 |
Impacts of impregnation with boron compounds on surface roughness of woods and varnished surfaces
Ors Y, Atar M, Keskin H, Colakoglu MH |
| 4958 - 4962 |
Synthesis and characterization of butan-1-of modified toluene diisocyanate trimer
Jin C, Lu J, Li WS, Zhou L, Huang QM, Yang XH |
| 4963 - 4970 |
Aluminosilicate-filled composites of PVA-PVP - An improved biodegradable polymeric material
Saha N, Ali SKA, Kar S, Saha P, Banthia AK |
| 4971 - 4977 |
Studies on grafting of acrylic acid onto polypropylene melt-blown nonwovens induced by electron-beam preirradiation
Cheng BW, Jiao XN, Kang WM |
| 4978 - 4982 |
A novel flame retardant of spirocyclic pentaerythritol bisphosphorate for epoxy resins
Chen GH, Yang B, Wang YZ |
| 4983 - 4988 |
Properties and morphology of poly(L-lactide)/clay composites according to the clay modification
Shim JH, Kim ES, Joo JH, Yoon JS |
| 4989 - 4995 |
Synthesis, characterization, and thermal behavior study of methyl methacrylate polymers containing 4-carbazole substitutes
Babazadeh M |
| 4996 - 5006 |
Preparation and characterization of polyurethane microcapsules containing n-octadecane with styrene-maleic anhydride as a surfactant by interfacial polycondensation
Su JF, Wang LX, Ren L, Huang Z, Meng XW |
| 5007 - 5017 |
Synthesis of poly(vinyl butyral)s in homogeneous phase and their thermal properties
Fernandez MD, Fernandez MJ, Hoces P |
| 5018 - 5027 |
Preparation of uniform poly(glycidyl methacrylate) porous microspheres by membrane emulsification-polymerization technology
Wang RW, Zhang Y, Ma GG, Su ZG |
| 5028 - 5038 |
The use of experimental design to study the responses of continuous devulcanization processes
Sutanto P, Picchioni F, Janssen LPBM |
| 5039 - 5049 |
Treatment of poly(styrene-co-methacrylic acid)/poly(4-vinylpyridine) blends in solution under liquid-liquid phase-separation conditions. A new method for phase-separation data attainment from viscosity measurements
Torrens F, Soria V, Monzo IS, Abad C, Campos A |
| 5050 - 5056 |
Influence of alkali treatment on the fine structure and morphology of bamboo fibers
Das M, Chakraborty D |
| 5057 - 5061 |
Performance evaluation of silane crosslinking of metallocene-based polyethylene-octene elastomer
Zhang GQ, Wang GL, Zhang J, Wei P, Jiang PK |
| 5062 - 5071 |
Synthesis and characterization of new flame-retardant poly(amide-imide)s containing phosphine oxide and hydantoin moieties in the main chain
Faghihi K |
| 5072 - 5082 |
Stabilization of epidermal growth factor on thermal and proteolytic degradation by conjugating with low molecular weight chitosan
Chung KH, Park SH, Kim MK, Dal Park H, Son TI |
| 5083 - 5084 |
Controlled release of bovine serum albumin using MPEG-PCL diblock copolymers as implantable protein carriers (vol 102, pg 1561, 2006)
Kim MS, Seo KS, Hyun H, Jeong SC, Seo SM, Lee JW, Lee B, Khang G, Lee HB |
