| 2749 - 2755 |
Application of hydrophilic starch-based coatings on polyethylene surfaces
Patil DR, Fanta GF, Felker FC, Salch JH |
| 2756 - 2761 |
The preparation and characterization of fiber reinforced alginate hydrogel
Qin Y |
| 2762 - 2771 |
Nanocrystallite regions of guar gum filled PU/PAN composites before and after biodegradation using WAXS
Kumar H, Siddaramaiah, Somashekar R, Mahesh SS, Manjunath A |
| 2772 - 2777 |
Simple route to get very hydrophobic surfaces of fibrous materials with core-shell latex particles
Nguyen D, Charnbon P, Rosselgong J, Cloutet E, Cramail H, Ravainel S |
| 2778 - 2786 |
Green and self-lubricating polyoxymethylene composites filled with low-density polyethylene and rice husk flour
Li K, Xiang DH, Lei XY |
| 2787 - 2801 |
Morphology and barrier properties of nanobiocomposites of poly(3-hydroxybutyrate) and layered silicates
Sanchez-Garcia MD, Gimenez E, Lagaron JM |
| 2802 - 2807 |
Synthesis and properties of novel Y-shaped nonlinear optical polymers containing imidazole-based chromophores
Pan Y, Tang XZ |
| 2808 - 2813 |
Synthesis of porous materials by 2-nitroresorcinol/cyanuric chloride thermal polycondensation in emulsions
Audouin F, Birot M, Pasquinet E, Deleuze H, Besnard O, Poullain D |
| 2814 - 2824 |
Conductivity and structure of a polyamide/silver iodide nanocomposite
Fujimori Y, Gotoh Y, Kawaguchi A, Hkoshi Y, Nagura M |
| 2825 - 2832 |
In situ pH-decrease-induced gelation of sodium alginate/carboxymethylated konjac glucomannan
Gao SJ, Wu CD, Nishina K |
| 2833 - 2839 |
Synthesis and electrorheological activity of a modified kaolinite/carboxymethyl starch hybrid nanocomposite
Zhao XP, Wang BX, Li J |
| 2840 - 2851 |
Tribological testing of peroxide cured HNBR with different MWCNT and silica contents under dry sliding and rolling conditions against steel
Felhos D, Karger-Kocsis J, Xu D |
| 2852 - 2856 |
Characterization of hot-pressed films from superfine wool powder
Wang X, Xu WL, Wang XG |
| 2857 - 2864 |
Thermal stability and molecular interaction of polyurethane nanocomposites prepared by in situ polymerization with functionalized multiwalled carbon nanotubes
Jana RN, Cho JW |
| 2865 - 2871 |
Influence of different functionalized multiwall carbon nanotubes on the mechanical properties of poly(ethylene terephthalate) fibers
Shen LM, Gao XS, Tong Y, Yeh A, Li RX, Wu DC |
| 2872 - 2875 |
Synthesis of polypyrrole nanofibers by ultrasonic waves
Athawale AA, Katre PP, Bhagwat SV, Dhamane AH |
| 2876 - 2885 |
Investigation of ionically crosslinked chitosan and chitosan-bovine serum albumin beads for novel gastrointestinal functionality
Rayment P, Butler MF |
| 2886 - 2894 |
Engineering extruded collagen fibers for biomedical applications
Zeugolis DI, Paul RG, Attenburrow G |
| 2895 - 2901 |
Preparation of cellulose sulfate from alpha-cellulose isolated from Lantana camara by the direct esterification method
Bhatt N, Gupta PK, Naithani S |
| 2902 - 2907 |
Synthesis and properties of dimethacrylates - Derivatives of maleic and fumaric acids
Matynia T, Podgorski M |
| 2908 - 2916 |
Time-Temperature-Transformation (TTT) diagram of the isothermal crosslinking of an epoxy/amine system: Curing kinetics and chemorheology
Mounif E, Bellenger V, Tcharkhtchi A |
| 2917 - 2922 |
Nonequilibrium nanoblend membranes for the pervaporation of benzene/cyclohexane mixtures
Okeowo O, Nam SY, Dorgan JR |
| 2923 - 2933 |
Nylon 6/organoclay nanocomposites by extrusion
Gonzalez TV, Salazar CG, De la Rosa JR, Gonzalez VG |
| 2934 - 2939 |
Compatibility, rheological, and thermal properties of the melt blends of PEN (HQ/PP) with PEN (HQ/RS)
Li C, Gao N, Liu XB |
| 2940 - 2949 |
Tailored functionalization of low-density polyethylene surfaces
Goddard JM, Hotchkiss JH |
| 2950 - 2957 |
Photostability of isotactic polypropylene containing monoazo pigment
Ahmadi Z, Kish MH, Freeman H, Kotek R, Katbab AA |
| 2958 - 2967 |
Preparation of monomethyl poly (ethylene glycol)-g-chitosan copolymers with various degrees of substitution: Their ability to encapsulate and condense plasmid DNA
Zhang W, Pan SR, Zhang X, Luo X, Du Z |
| 2968 - 2974 |
Effective thermal conductivity behavior of filled vulcanized perfluoromethyl vinyl ether rubber
Wang L, Li FP, Su ZT |
| 2975 - 2982 |
Synthesis and characterization of new optically active segmented poly(amide imide urethane)s based on different diacids via an isocyanate route
Mallakpour S, Khani M, Rafiemanzelat F |
| 2983 - 2987 |
Surface and bulk properties of glycidyl methacrylate modified polypropylene: Experimental and molecular modeling studies
Verenich S, Paul S, Pourdeyhimi B |
| 2988 - 2993 |
General and more precise relationships between molecular weight, blend ratio, and melt index of binary polyethylene blends
Ghasemi SM, Sadeghi GMM |
| 2994 - 3000 |
Structural characteristics and selected properties of polyacrylonitrile nanofiber mats
Borhani S, Hosseini SA, Etemad SG, Militky J |
| 3001 - 3008 |
Study on the microstructure of EPDM/NBR blend by positron annihilation spectroscopy
Mostafa N |
| 3009 - 3015 |
Effect of solvent on the chain conformation and cure behavior of phenolic resin
Zhang Y, Liu YJ, He Q, Han ZW |
| 3016 - 3023 |
Effect of the composition of alpha-MSAN copolymer on the miscibility of PVC/alpha-MSAN blends
Zhang LX, Sun SL, Ren L, Zhang FF, Zhang MY, Zhang HX |
| 3024 - 3030 |
A study of carbon nanotubes/biodegradable plastic polylactic acid composites
Chiu WM, Chang YA, Kuo HY, Lin MH, Wen HC |
| 3031 - 3037 |
Preparation of temperature-sensitive poly(N-isopropylacrylamide)/beta-cyclodextrin-grafted polyethylenimine hydrogels for drug delivery
Zhang JT, Xue YN, Gao FZ, Huang SW, Zhuo RX |
| 3038 - 3045 |
Measurement of the condensation temperature of nanosilica powder organically modified by a silane coupling agent and its effect evaluation
Liu X, Zhao SH |
| 3046 - 3062 |
Cryostructuring of polymer systems. XXIX. Preparation and characterization of supermacroporous (spongy) agarose-based cryogels used as three-dimensional scaffolds for culturing insulin-producing cell aggregates
Lozinsky VI, Damshkaln LG, Bloch KO, Vardi P, Grinberg NV, Burova TV, Grinberg VY |
| 3063 - 3072 |
Effects of the composition and nematic-isotropic phase transition on the electro-optical responses of unaligned polymer-dispersed liquid crystals. I. Composites of poly(methyl methacrylate) and E8
Deshmukh RR, Malik MK |
| 3073 - 3091 |
Investigation of the water and fuel exposure characteristics of aircraft fuel tank sealants and the effect on their glass transition temperature
Giannis S, Adams RD, Clark LJ, Taylor MA |
| 3092 - 3103 |
Structure-property relationships of thermoplastic polyurethane elastomers based on polycarbonate diols
Eceiza A, Larranaga M, de la Caba K, Kortaberria G, Marieta C, Corcuera MA, Mondragon I |
| 3104 - 3113 |
Radiation induced graft copolymerization of vinyl monomers and their binary mixture onto rayon fibre
Rattan S, Maitra J, Misra BN, Kaur I |
| 3114 - 3121 |
Control of structure formation of polycarbosilane synthesized from polydimethylsilane by Kumada rearrangement
Chen JX, He GM, Liao ZN, Zeng BR, Ye JL, Chen LF, Xia HP, Zhang LT |
| 3122 - 3127 |
Graft copolymerization of acrylamide onto konjac glucomannan via inverse emulsion polymerization and its thickening properties
Tian DT, Xie HQ |
| 3128 - 3137 |
Microstructural investigation of long-term degradation mechanisms in GFRP dowel bars for jointed concrete pavement
Park CG, Jang CI, Lee SW, Won JP |
| 3138 - 3147 |
Synthesis, characterization and antimicrobial properties of new poly(ether-ketone)s and copoly(ether-ketone)s containing diarylidenecycloalkanone moieties in the main chain
Al-Muaikel NS, Aly KI, Hussein MA |
| 3148 - 3153 |
Mechanical properties of an ultrahigh-molecular-weight polyethylene/polypropylene blend containing poly(ethylene glycol) additives
Xie MJ, Li HL |
| 3154 - 3162 |
Effects of the diluent mixing ratio and conditions of the thermally induced phase-separation process on the pore size of microporous polyethylene membranes
Yoo SH, Kim CK |
| 3163 - 3168 |
Chemical modification of polystyrene by low-energy (< 100 eV) electron irradiation studied by mass spectrometry
Massey S, Cloutier P, Bazin M, Sanche L, Roy D |
| 3169 - 3176 |
Synthesis and characterization of photopatternable epoxy hybrid materials for the fabrication of thick and thermally stable microstructures with a high aspect ratio
Jung KH, Bae BS |
| 3177 - 3184 |
Preparation of PS-g-PA6 copolymers by anionic polymerization of epsilon-caprolactam using PS precursors with N-carbamated caprolactam pendants as macroactivators
Liu YC, Xu W, Xiong YQ, Xu WJ |
| 3185 - 3190 |
Correlation of mechanical behaviors with crystalline phase and related cavitation in isotactic polypropylene
Lv RH, Xu WF, Na B, Yan JZ |
| 3191 - 3199 |
Surface functionalization with phoslphazenes. V. Surface modification of plasma-treated polyamide 6 with fluorinated alcohols and azobenzene derivatives through chlorinated phosphazene intermediates
De Jaeger R, Mazzah A, Gengembre L, Frere M, Jama C, Milani R, Bertani R, Gleria M |
| 3200 - 3209 |
Solvent free biocatalytic synthesis of vinyl monomers by lipase immobilized on hydrogels
Chauhan GS, Kanwar SS, Kumar R, Kumar Y, Chauhan S |
| 3210 - 3217 |
Preparation and evaluation of beta-TCP/polylactide microspheres as osteogenesis materials
Lin LC, Chang SJ, Kuo SM, Niu GCC, Keng HK, Tsai PH |
| 3218 - 3224 |
Third-order nonlinear optical properties and two-photon absorption in polymers doped with p-phenyl sydnone
Shettigar S, Umesh G, Chandrasekharan K, Rai G, Kalluraya B |
| 3225 - 3232 |
Phthalocyanine/Laponite nanocomposites as multifunction additives for stabilization of polymeric materials
El-Ghaffar MAA, El-Halawany NR, Essawy HA |
| 3233 - 3238 |
A study on dynamic friction of different spun yarns
Ghosh A, Patanaik A, Anandjiwala RD, RengasaMY RS |
| 3239 - 3244 |
Gold/Chitosan/Pluronic nanoparticles for drug delivery composite
Oh KS, Kim RS, Lee J, Kim D, Cho SH, Yuk SH |
| 3245 - 3255 |
Nonwoven as heat barrier: Modeling of the efficiency of Carbtex fibers
Bourbigot S, Duquesne S, Vannier A, Delobel R |
| 3256 - 3261 |
Comparison of specific interactions in P4VP/PSCA and PS4VP/PSCA blends and complexes
Bouslah N, Haddadine N, Amrani F, Harnmachin R |
| 3262 - 3269 |
Ruthenium (II) complexes immobilized on swellable polyacrylate matrices: synthesis and catalytic applications
Liu ZS, Rempel GL |
| 3270 - 3280 |
Synergistic toughening effects of nucleating agent and ethylene-octene copolymer on polypropylene
Bai H, Wang Y, Song B, Han L |
| 3281 - 3290 |
Grafted CMC/silica gel superabsorbent composite: Synthesis and investigation of swelling behavior in various media
Pourjavadi A, Seidi F, Salimi H, Soleyman R |
| 3291 - 3297 |
Poly(3-alkylthiophene)s as anticorrosive additive for paints: Influence of the main chain stereoregularity
Iribarren J, Ocampo C, Armelin E, Liesa F, Aleman C |
| 3298 - 3304 |
Solid-phase microextraction and ion chromatographic analysis of anions based on polypyrrole electrode
Ahin Y, Ercan B, Sahin M |
| 3305 - 3312 |
Degradability of the linear azo polymer conjugated 5.5'-azodisalicylic acid segment in the main chain for colon-specific drug delivery
Lai JY, Tu KH, Wang HJ, Chen ZG, Wang LQ |
| 3313 - 3323 |
Preparation of methacrylamide grafted and dye-ligand immobilized PET fibers: Studies of adsorption and purification of lysozyme
Karakisla M, Bayramoglu G, Arica MY |
| 3324 - 3333 |
Processing - Morphology regulation of epoxy/layered-silicate nanocomposites
Chen C, Benson-Tolle T, Baur JW, Putthanarat S |
| 3334 - 3345 |
Melting and crystallization behaviors of compatibilized poly(trimethylene terephthalate)/acrylonitrile-butadiene-styrene blends
Xue ML, Yu YL, Chuah HH, Rhee JM, Lee JH |
| 3346 - 3352 |
Architecture of rod-brush block copolymers synthesized by a combination of coordination polymerization and atom transfer radical polymerization
Ishizu K, Hatoyama N, Uchida S |
| 3353 - 3360 |
Controlled release of Argatroban from PLA film - Effect of hydroxylesters as additives on enhancement of drug release
Mochizuki A, Niikawa T, Omura I, Yamashita S |
| 3361 - 3369 |
Impact of impregnation chemical on surface glossiness of synthetic, acrylic, polyurethane, and water-based varnishes
Keskin H, Atar M |
| 3370 - 3379 |
Effect of beta-nucleating agents on crystallization and melting behavior of isotactic polypropylene
Mao WC, Wu PY, Feng JC |
| 3380 - 3387 |
Hydrophobic properties of new epoxy-silica hybrids
Cardiano P |
| 3388 - 3402 |
Ethylene homo- and copolymerization over MgCl2-TiCl4 catalysts: Polymerization kinetics and polymer particle morphology
Nejad MH, Ferrari P, Pennini G, Cecchin G |
| 3403 - 3410 |
High recovery system in seawater reverse osmosis plants
Fujiwara N, Matsuyama H |
| 3411 - 3418 |
Effect of the addition of the surfactant tetronic 1307 on poly(ether sulfone) porous hollow-fiber membrane formation
Rahman NA, Sotani T, Matsuyama H |
| 3419 - 3429 |
Synthesis and properties of SMA-g-PA6 and PPO blends via in situ active anionic polymerization of epsilon-caprolactam comp ring with MCPA6/PPO blends
Du LB, Yang GS |
| 3430 - 3434 |
Synthesis, characterization, and property of end-functionalized telechelic PSt via ATRP
Lu JM, Xia XW, Guo X, Xu QF, Yan F, Wang LH |
