| 3117 - 3126 |
The Influence of Enzymatic Treatment on the Surface Modification of PET Fibers
Kardas I, Lipp-Symonowicz B, Sztajnowski S |
| 3127 - 3135 |
Molecular Weight-Dependent Antifungal Activity and Action Mode of Chitosan Against Fulvia fulva (Cooke) Ciffrri
Li MQ, Chen XG, Liu JM, Zhang WF, Tang XX |
| 3136 - 3144 |
Physical Properties of Polyamide 6/H-NBR Blends and the Effects of Dynamic Vulcanization on Them
Hwang SW, Kim SW, Park HY, Jeon IL, Seo KH |
| 3145 - 3151 |
Decomposition Characteristics of Biodegradable Plastics Made from Sago Starch-Extraction Residue
Igura M, Okazaki M, Ohmi M |
| 3152 - 3161 |
Dry Jet-Wet Spinning of Bagasse/N-methylmorpholine-N-oxide Hydrate Solution and Physical Properties of Lyocell Fibres
Yamamoto A, Uddin AJ, Gotoh Y, Nagura M, Iwata M |
| 3162 - 3169 |
Effect of Poly(etherimide) Chemical Structures on the Properties of Epoxy/Poly(etherimide) Blends and Their Carbon Fiber-Reinforced Composites
Chen WM, Tao ZQ, Fan L, Yang SY, Jiang WG, Wang JF, Xiong YL |
| 3170 - 3179 |
Characterization of Terpolymers Containing 1,2,4-Oxadiazolic Pendant Groups with Potential Application as Workover Fluids
Vega I, Lamanna M, Fissore E, D'Accorso N, Rojas AM |
| 3180 - 3188 |
Synthesis and Characterization of Cation-Exchange Membrane Based on Sulfonated Sty/HEA/LMA Terpolymer
Shin KS, Choi EM, Hwang TS |
| 3189 - 3198 |
Effect of the Synthesis Initiation Mode on the Structure and Properties of Sulfadiazine Molecularly Imprinted Polymers
Zhang ZL, Wang B, Li JA |
| 3199 - 3206 |
Synthesis and Characterization of Poly{N-[3-(dimethylamino) propyl] methacrylamide-co-itaconic acid} Hydrogels for Drug Delivery
Mishra RK, Ray AR |
| 3207 - 3216 |
Wood-Polymer Composites Prepared by the In Situ Polymerization of Monomers Within Wood
Li YF, Liu YX, Wang XM, Wu QL, Yu HP, Li JA |
| 3217 - 3226 |
Role of the Interface in the Melt-Rheology Properties of Linear Low-Density Polyethylene/Low-Density Polyethylene Blends: Effect of the Molecular Architecture of the Dispersed Phase
Robledo N, Vega JF, Nieto J, Martinez-Salazar J |
| 3227 - 3233 |
Synthesis and Thermal Behavior of Poly(methyl methacrylate)/Maghnia Bentonite Nanocomposite Prepared at Room Temperature via In Situ Polymerization Initiated by a New Ni(II)alpha-Benzoinoxime Complex
Ouaad K, Djadoun S, Ferfera-Harrar H, Sbirrazzuoli N, Vincent L |
| 3234 - 3243 |
Effective Surface Treatments for Enhancing the Thermal Conductivity of BN-Filled Epoxy Composite
Wattanakul K, Manuspiya H, Yanumet N |
| 3244 - 3252 |
Antimicrobial Hydrogels Formed by Crosslinking Polyallylamine with Aldaric Acid Derivatives
Andrews MA, Figuly GD, Chapman JS, Hunt TW, Glunt CD, Rivenbark JA, Chenault HK |
| 3253 - 3263 |
Effect of Tetraacid on the Properties of ODPA/4,4'-ODA Polyimide Foams
Liu XY, Zhan MS, Shen YX, Wang K |
| 3264 - 3272 |
Melt Spinning of Conducting Polymeric Composites Containing Carbonaceous Fillers
Straat M, Toll S, Boldizar A, Rigdahl M, Hagstrom B |
| 3273 - 3281 |
Mechanism Analysis of Poly(lactic acid) Particles Formation by Mesoscale Simulation
Zhu AM, Weng J, Liu QL |
| 3282 - 3285 |
Synthesis and Property Studies of N-Carboxymethyl Chitosan
Song QP, Zhang Z, Gao JG, Ding CM |
| 3286 - 3296 |
Characterization of Surface-Modified Polyalkanoate Films for Biomedical Applications
Garrido L, Jimenez I, Ellis G, Cano P, Garcia-Martinez JM, Lopez L, de la Pena E |
| 3297 - 3304 |
Flexural Behavior of Methyl Methacrylate Modified Unsaturated Polyester Polymer Concrete Beams Reinforced with Glass-Fiber-Reinforced Polymer Sheets
Yeon KS, Kim YS, Kim YI, Choi YS |
| 3305 - 3314 |
Synthesis and Properties of Grafted Latices from a Soybean Oil-Based Waterborne Polyurethane and Acrylics
Lu YS, Larock RC |
| 3315 - 3320 |
Thermo-Oxidative Degradation Behavior of Recycled Polypropylene
Nasir A, Yasin T, Islam A |
| 3321 - 3328 |
Thermal and Mechanical Properties of Polypropylene/Wood-Flour Composites
Ndiaye D, Matuana LM, Morlat-Therias S, Vidal L, Tidjani A, Gardette JL |
| 3329 - 3337 |
Formation of Honeycomb-Patterned Microporous Films Based on a Fluorinated Poly(siloxane imide) Segmented Copolymer
Jiang X, Gu JA, Shen Y, Wang SG, Tian XZ |
| 3338 - 3346 |
Biodegradability Assessment of Aliphatic Polyesters-Based Blends Using Standard Methods
Moura I, Machado AV, Duarte FM, Nogueira R |
| 3347 - 3359 |
Incorporating Multiscale Micromechanical Approach into PLSNs with Different Intercalated Morphologies
Yazdi AZ, Bagheri R, Kazeminezhad M, Heidarian D |
| 3360 - 3371 |
Effect of Carbon Nanotube Purification on the Electrical and Mechanical Properties of Poly(ethylene terephthalate) Composites with Carbon Nanotubes in Low Concentration
Yesil S, Bayram G |
| 3372 - 3381 |
Rapid Homogeneous Esterification of Cellulose Extracted from Posidonia Induced by Microwave Irradiation
Chadlia A, Farouk MM |
| 3382 - 3392 |
No-Flow Temperature in Injection Molding Simulation
Mannella GA, La Carrubba V, Brucato V, Zoetelief W, Haagh G |
| 3393 - 3402 |
Cycloolefin Copolymer/Fumed Silica Nanocomposites
Dorigato A, Pegoretti A, Fambri L, Slouf M, Kolarik J |
| 3403 - 3412 |
Evaluating the Behavior of Castor-Oil-Based Polyurethanes in Acidic Environments on the Basis of the Sorption Behavior and Analysis with Electron Ionization Mass Spectroscopy and Neutron Activation Analysis
Mortley A, Bonin HW, Bui VT |
| 3413 - 3421 |
Separation of Ethanol from Ethanol/Water Mixtures by Pervaporation with Silicone Rubber Membranes: Effect of Silicone Rubbers
Han XL, Wang L, Li JD, Zhan X, Chen JA, Yang JC |
| 3422 - 3428 |
Isoprene Rubber Filled with Silica Generated In Situ
Messori M, Fiorini M |
| 3429 - 3436 |
Effect of Sterilization Techniques on the Physicochemical Properties of Polysulfone Hollow Fibers
Madsen B, Britt DW, Griffiths F, McKenna E, Ho CH |
| 3437 - 3445 |
Self-Assembled and Crystallized Composites Made from Poly(ether amine) and Montmorillonite in the Presence of Copper(II) Ions
Lee RJ, Tsai WC, Cheng WT, Shiue BC, Lin JJ |
| 3446 - 3452 |
Sulphur-Vulcanized Polybutadiene as a Matrix in Glass Fiber-Reinforced Composite Materials
Prokupek L, Vecera M, Machotova J, Snuparek J |
| 3453 - 3461 |
Preparation of Cellulose-Tungsten Carbide Composite Beads with Ionic Liquid for Expanded Bed Application
Shi F, Lin DQ, Phottraithip W, Yao SJ |
| 3462 - 3466 |
Oxidation of Alcohols Mediated by a Polymer Supported Potassium Ferrate as an Effective Mild Oxidant
Zarchi MAK, Taefi M |
| 3467 - 3475 |
Miscibility and Crystallization Behaviors of Poly(3-hydroxybutyrate-co-11%-4-hydroxybutyrate)/Poly(3-hydroxybutyrate-co-33%-4-hydroxybutyrate) Blends
Lan ZY, Pan JY, Wang XJ, He JY, Xu KT |
| 3476 - 3482 |
Barrier Properties in Hydrogenated Acrylonitrile Butadiene Rubber Compounds Containing Organoclays and Perfluoropolyether Additives
Valsecchi R, Torlaj L, Turri S, Tonelli C, Levi M |
| 3483 - 3489 |
Preparation of Chelating Fabrics by Radiation-Induced Grafting of Itaconic Acid and Acrylonitrile onto Polypropylene Nonwoven Fabrics and Subsequent Amination of Graft Copolymer
Zu JH, Nho YC, Jeun JP, Liu RQ, Liu L, Yan F, Xia M |
| 3490 - 3494 |
In Vitro Biocompatibility of Electrospun Silk Fibroin Mats with Schwann Cells
Xu SQ, Yan XL, Zhao YH, Wang W, Yang YM |
| 3495 - 3503 |
Removal of Arsenic from Aqueous Solutions by an Adsorption Process with Titania-Silica Binary Oxide Nanoparticle Loaded Polyacrylonitrile Polymer
Nilchi A, Garmarodi SR, Darzi SJ |
| 3504 - 3510 |
Effect of the Structure of Curing Agents Modified by Epoxidized Oleic Esters on the Toughness of Cured Epoxy Resins
Cheng X, Chen YX, Du ZL, Zhu PX, Wu DC |
| 3511 - 3520 |
Chemical Structure of Poly(beta-cyclodextrin-co-citric acid)
Bednarz S, Lukasiewicz M, Mazela W, Pajda M, Kasprzyk W |
| 3521 - 3530 |
Effect of Nanosilica Content on Properties of Polyurethane/Silica Hybrid Emulsion and Its Films
Wang L, Shen YD, Lai XJ, Li ZJ |
| 3531 - 3537 |
Synthesis and Swelling Properties of pH- and Temperature-Sensitive Interpenetrating Polymer Networks Composed of Polyacrylamide and Poly(gamma-glutamic acid)
Rodriguez-Felix DE, Castillo-Ortega MM, Real-Felix D, Romero-Garcia J, Ledezma-Perez AS, Rodriguez-Felix F |
| 3538 - 3543 |
Characterization and Performance of Melamine Enhanced Urea Formaldehyde Resin for Bonding Southern Pine Particleboard
Sun QN, Hse CY, Shupe TF |
| 3544 - 3552 |
Production and Properties of Solvent-Cast Poly(epsilon-caprolactone) Composites with Carbon Nanostructures
Dottori M, Armentano I, Fortunati E, Kenny JM |
| 3553 - 3559 |
Natural Extracts as Potential Source of Antioxidants to Stabilize Polyolefins
Dopico-Garcia MS, Castro-Lopez MM, Lopez-Vilarino JM, Gonzalez-Rodriguez MV, Valentao P, Andrade PB, Garcia-Garabal S, Abad MJ |
| 3560 - 3565 |
Preparation and Characterization of Nano/Micro-Calcium Carbonate Particles/Polypropylene Composites
Zhang J, Han B, Zhou NL, Fang J, Wu JA, Ma ZM, Mo H, Shen JA |
| 3566 - 3573 |
Nonisothermal Crystallization and Melting Behavior of beta-Nucleated Isotactic Polypropylene and Polyamide 66 Blends
Yang ZG, Mai KC |
| 3574 - 3581 |
Dispersion of SiC Coated MWCNTs in PEI/Silicone Rubber Blend and Its Effect on the Thermal and Mechanical Properties
Nayak GC, Rajasekar R, Das CK |
| 3582 - 3590 |
Surface-Initiated Nitroxide-Mediated Radical Polymerization of 4-Vinylpyridine on Magnetite Nanoparticles
Chen ZJ, Yang QX, Peng K, Guo YB |
| 3591 - 3597 |
Morphology and Mechanical Properties of Binary Blends of Polypropylene with Statistical and Block Ethylene-Octene Copolymers
Liu GM, Zhang XQ, Liu CY, Chen HY, Walton K, Wang DJ |
| 3598 - 3606 |
Influence of Microwave Heating on the Polymerization Kinetics and Application Properties of the PMMA Dental Materials
Spasojevic P, Adnadevic B, Velickovic S, Jovanovic J |
| 3607 - 3614 |
Preparation, Characterization, and Testing of a Composite Membrane with pH Sensitivity
Yin ZH, Fu KY, Gao JA, Cao XL, Li LL, Zhao CS |
| 3615 - 3622 |
Encapsulation of Hydrophilic Dyes with Polystyrene Using Double Miniemulsion Technique
Zhao XA, Zhou SX, Chen M, Wu LM, Gu GX |
| 3623 - 3629 |
Viscosity and Retention of Sulfonated Polyacrylamide Polymers at High Temperature
Rashidi M, Blokhus AM, Skauge A |
| 3630 - 3639 |
An Investigation Into Transition Metal Ion Binding Properties of Silk Fibers and Particles Using Radioisotopes
Rajkhowa R, Naik R, Wang LJ, Smith SV, Wang XG |
| 3640 - 3644 |
Electrospun Composite Nanofibers of Poly (Vinylidene Fluoride-Trifluoroethylene)/Polyaniline-Polystyrene Sulfonic Acid
Abreu M, Montanez S, Pinto NJ |
| 3645 - 3657 |
Early Development of a Biodegradable Energetic Elastomer
Cossu C, Heuzey MC, Lussier LS, Dubois C |
| 3658 - 3669 |
Influence of the Type of Quaternary Ammonium Salt Used in the Organic Treatment of Montmorillonite on the Properties of Poly(Styrene-co-Butyl Acrylate)/Layered Silicate Nanocomposites Prepared by In Situ Miniemulsion Polymerization
Moraes RP, Valera TS, Pereira AMC, Demarquette NR, Santos AM |
| 3670 - 3674 |
Enhancing Polymer Performance Through Graphene Sheets
Qiu JJ, Wang SR |
| 3675 - 3686 |
Preparation and Swelling Characteristics of a Superabsorbent Nanocomposite Based on Natural Guar Gum and Cation-Modified Vermiculite
Wang WB, Zhai NH, Wang AQ |
| 3687 - 3695 |
Differential Scanning Calorimetric Examination of Melamine-Formaldehyde Microcapsules Containing Decane
Alic B, Sebenik U, Krajnc M |
| 3696 - 3707 |
Influence of Alkali Fiber Treatment and Fiber Processing on the Mechanical Properties of Hemp/Epoxy Composites
Islam MS, Pickering KL, Foreman NJ |
| 3708 - 3716 |
Incorporating Amylopectin in Poly(lactic acid) by Melt Blending Using Poly(ethylene-co-vinyl alcohol) as a Thermoplastic Carrier. II. Physical Properties
Sanchez-Garcia MD, Nordqvist D, Hedenqvist M, Lagaron JM |
| 3717 - 3727 |
Grafting of Poly(ethylene glycol) Monoacrylate onto Polycarbonateurethane Surfaces by Ultraviolet Radiation Grafting Polymerization to Control Hydrophilicity
Zhao HY, Feng YK, Guo JT |
| 3728 - 3738 |
Preparation of Highly Open Porous Styrene/Acrylonitrile and Styrene/Acrylonitrile/Organoclay Polymerized High Internal Phase Emulsion (PolyHIPE) Foams via Emulsion Templating
Abbasian Z, Moghbeli MR |
