| 1237 - 1243 |
Analysis of Poly(Ethylene-Terephthalate) (Pet) Films by Atomic-Force Microscopy
Gould SA, Schiraldi DA, Occelli ML |
| 1245 - 1255 |
Mechanical-Properties and Failure Mode of Thermoplastic Elastomers from Natural-Rubber Poly(Methyl Methacrylate) Natural Rubber-G-Poly(Methyl Methacrylate) Blends
Oommen Z, Thomas S |
| 1257 - 1262 |
Porous Structure and Swelling Properties of Styrene-Divinylbenzene Copolymers for Size-Exclusion Chromatography
Coutinho FM, Neves MA, Dias ML |
| 1263 - 1270 |
Development of Poly(Vinylidene Fluoride) Hollow-Fiber Membranes for the Treatment of Water/Organic Vapor Mixtures
Chabot S, Roy C, Chowdhury G, Matsuura T |
| 1271 - 1283 |
Kinetics of Ion-Exchange in Monodisperse Resin
Krongauz VV, Kocher CW |
| 1285 - 1291 |
Copolymerization of 4-Nitrophenyl Acrylate with Glycidyl Methacrylate - Synthesis, Characterization, and Reactivity Ratios
Thamizharasi S, Gnanasundaram P, Reddy BS |
| 1293 - 1306 |
Optothermal Properties of Fibers .7. Optical Investigation of Annealed Nylon-6 Fibers
Fouda IM, Eltonsy MM, Metawe FM, Hosny HM, Easawi KH |
| 1307 - 1311 |
Spectrophotometric Behavior of Polyvinylpyrrolidone in Aqueous-Solutions .2. The Effects of Denaturing Agents
Guner A |
| 1313 - 1318 |
Photopolymerization Synthesis of Poly(N-Isopropylacrylamide) Hydrogels
Kubota H, Fukuda A |
| 1319 - 1332 |
Synthesis, Characterization, and Stability of Poly((Alkylene Oxide) Ester) Thermoplastic Elastomers
Mccarthy SJ, Meijs GF, Gunatillake P |
| 1333 - 1347 |
Role of Reaction-Time in Batch Process Modification of Atactic Polypropylene by Maleic-Anhydride in Melt
Garciamartinez JM, Laguna O, Collar EP |
| 1349 - 1357 |
Toughening of Bismaleimide Resin by Modification with Poly(Ethylene Phthalate) and Poly(Ethylene Phthalate-Co-Ethylene Isophthalate)
Iijima T, Shiono H, Fukuda W, Tomoi M |
| 1359 - 1362 |
Flow Profile Induced in Spinneret During Hollow-Fiber Membrane Spinning
Shilton SJ |
| 1363 - 1370 |
Effects of Transitional Phenomena on the Electric-Field-Induced Strain - Electrostrictive Response of a Segmented Polyurethane Elastomer
Su J, Zhang QM, Kim CH, Ting RY, Capps R |
| 1371 - 1377 |
Enhancement of the Relative Magnetic-Permeability of Polymeric Composites with Hybrid Particulate Fillers
Fiske TJ, Gokturk H, Kalyon DM |
| 1379 - 1384 |
Thermal-Behavior of Natural-Rubber and Chlorinated Rubber Blends
Cook JW, Edge S, Packham DE, Thompson AS |
| 1385 - 1393 |
Polyolefin/Polystyrene in-Situ Compatibilization Using Friedel-Crafts Alkylation
Sun YJ, Baker WE |
| 1395 - 1402 |
Cell Distributions in and Sound-Absorption Characteristics of Flexible Polyurethane Foams
Adachi H, Hasegawa T, Asano T |
| 1403 - 1413 |
Dynamic Behavior of a Continuous Autothermal Isobutylene Polymerization Reactor
Nele M, Pinto JC |
| 1415 - 1427 |
Fiber Structure Formation in Ultra-High-Speed Melt-Spinning of Poly(Ethylene 2,6-Naphthalene Dicarboxylate)
Miyata K, Kikutani T, Okui N |
| 1429 - 1439 |
High-Strain Hysteresis of Rubber Vulcanizates over a Range of Compositions, Rates, and Temperatures
Kar KK, Bhowmick AK |
| 1441 - 1441 |
Effect of Filler Type on the Response of Polysiloxane Elastomers to Cyclic Stress at Elevated-Temperatures (Vol 63, Pg 1805, 1997)
Visser SA, Hewitt CE, Fitzgerald JJ, Ferrar WT, Binga TD |
| 1443 - 1443 |
Stabilization of Filled Polysiloxane Elastomers to Cyclic Stress at Elevated-Temperature Through Use of Zinc-Oxide Fillers (Vol 64, Pg 1499, 1997)
Visser SA, Hewitt CE, Fitzgerald JJ, Ferrar WT, Binga TD |
