| 3969 - 3973 |
Thermoelectric properties of Ca3Co4O9+delta with Lu substitution
Tang GD, Wang ZH, Xu XN, Qiu L, Xing L, Du YW |
| 3974 - 3980 |
Drying of aerogel-bonded sands
Reuss M, Ratke L |
| 3981 - 3989 |
Hollow polymer microspheres containing a gold nanocolloid core adsorbed on the inner surface as a catalytic microreactor
Wang XX, Ji HF, Zhang X, Zhang H, Yang XL |
| 3990 - 3997 |
Creep behavior of MAR-M 302 Co-base superalloy
Aghaie-Khafri M, Binesh B |
| 3998 - 4005 |
Changes of polyacrylonitrile fiber fine structure during thermal stabilization
Fazlitdinova AG, Tyumentsev VA, Podkopayev SA, Shveikin GP |
| 4006 - 4012 |
Synthesis and evaluation of a hydrogel that binds glucose and releases ciprofloxacin
Manju S, Antony M, Sreenivasan K |
| 4013 - 4020 |
Optical properties of metal phthalocyanines
Singh P, Ravindra NM |
| 4021 - 4028 |
Phase characterization in as-cast F-75 Co-Cr-Mo-C alloy
Rosenthal R, Cardoso BR, Bott IS, Paranhos RPR, Carvalho EA |
| 4029 - 4035 |
The effect of heat treatments on the creep-rupture properties of a wrought Ni-Cr heat-resistant alloy at 973 K
Tanaka M, Kato R |
| 4036 - 4039 |
Electric-field effect of near-band-edge photoluminescence in bulk ZnO
Kim JH, Yu JH, Kim TS, Jeong TS, Youn CJ, Hong KJ |
| 4040 - 4045 |
Visible-light activities of Gd2O3/BiVO4 composite photocatalysts
Zhang AP, Zhang JZ |
| 4046 - 4053 |
Study on the dislocation sub-structures of Al-Mg-Si alloys fatigued under non-proportional loadings
Ding XQ, He GQ, Chen CS |
| 4054 - 4057 |
SC-CO2-assisted rubber dispersion and dynamic vulcanization in blending of PP/EPDM thermoplastic olefin
Zhao Y, Huang HX, Chen YK, Wu XJ |
| 4058 - 4062 |
The effect of Ti addition on alloying and formation of nanocrystalline structure in Fe-Al system
Rafiei M, Enayati MH, Karimzadeh F |
| 4063 - 4066 |
The fracture energy of brittle crystals
Freiman SW, Mecholsky JJ |
| 4067 - 4072 |
Size effect on friction in scaled down strip drawing
Guo B, Gong F, Wang CJ, Shan DB |
| 4073 - 4077 |
The mechanism of the failure of the dispersion-strengthened Cu-Al2O3 nanosystem
Besterci M, Velgosova O, Ivan J, Kvackaj T |
| 4078 - 4083 |
Testing of explosive welding and welded joints: joint mechanism and properties of explosive welded joints
Wronka B |
| 4084 - 4087 |
Influences of 1 wt% La-rich RE addition and deformation processes on the alloy of Mg-6Li-1.5Al
Qu ZK, Ji GD, Wu RZ, Zhang ML |
| 4088 - 4092 |
Controlled synthesis and structural characterization of polycrystalline GaSe
Abdullah MM, Bhagavannarayana G, Wahab MA |
| 4093 - 4096 |
An approach to enhanced acceptor concentration in ZnO:N films
Li L, Shan CX, Li BH, Zhang JY, Yao B, Shen DZ, Fan XW, Lu YM |
| 4097 - 4110 |
Yield stress of SiC reinforced aluminum alloy composites
Song M, He YH, Fang SF |
| 4111 - 4114 |
Tunable visible emission and warm white photoluminescence of lithium-doped zinc oxide thin films
Wang M, Shin EW, Chung JS, Hur SH, Kim EJ, Hahn SH, Koo KK |
| 4115 - 4125 |
Comparison between the process-structure-property relationships of silica foams prepared through two different processing routes
Mishra S, Mitra R |
| 4126 - 4132 |
Dual orientation and variant selection during diffusional transformation of austenite to allotriomorphic ferrite
Kim DW, Suh DW, Qin RS, Bhadeshia HKDH |
| 4133 - 4140 |
Calculation and experimental determinations of the residual stress distribution in alumina/Ni/alumina and alumina/Ni/nickel alloy systems
Hattali ML, Valette S, Ropital F, Mesrati N, Treheux D |
| 4141 - 4150 |
Silicone-modified cellulose. Crosslinking of cellulose acetate with poly[dimethyl(methyl-H)siloxane] by Pt-catalyzed dehydrogenative coupling
Stiubianu G, Racles C, Cazacu M, Simionescu BC |
| 4151 - 4157 |
NOX reduction over paper-structured fiber composites impregnated with Pt/Al2O3 catalyst for exhaust gas purification
Koga H, Ishihara H, Kitaoka T, Tomoda A, Suzuki R, Wariishi H |
| 4158 - 4162 |
Preparation of CeO2 hollow spheres via a surfactant-assisted solvothermal route
Song YT, Wei JJ, Yang YZ, Yang ZJ, Yang HX |
| 4163 - 4173 |
Investigation of reactive cerium-based oxides for H-2 production by thermochemical two-step water-splitting
Abanades S, Legal A, Cordier A, Peraudeau G, Flamant G, Julbe A |
| 4174 - 4179 |
Studies on cold upsetting behaviour of AA2014-based metal matrix composites, FEM simulation, and comparison with experimental results
Dikshit S, Gurjar V, Dasgupta R, Chaturvedi S, Pathak KK, Jha AK |
| 4180 - 4187 |
Effect of nanoclay addition on the displacement-controlled flexural fatigue behavior of a polymer
Ramkumar A, Gnanamoorthy R |
| 4188 - 4195 |
Characterisation of Conform (TM) and conventionally extruded Al-4Mg-1Zr. Effect of extrusion route on superplasticity
Katsas S, Dashwood R, Todd G, Jackson M, Grimes R |
| 4196 - 4205 |
Effects of fiber blending and diamines on wheat gluten materials reinforced with hemp fiber
Wretfors C, Cho SW, Kuktaite R, Hedenqvist MS, Marttila S, Nimmermark S, Johansson E |
| 4206 - 4215 |
Effect of drawing on the dielectric properties and polarization of pressed solution cast beta-PVDF films
da Silva AB, Wisniewski C, Esteves JVA, Gregorio R |
| 4216 - 4223 |
Synthesis and structural characterization of Eu(III)-doped Zn7Sb2O12
Silva ACS, Souza GG, Nobre MAL, Pires AM |
| 4224 - 4228 |
Piezoresistive response of ITO films deposited at room temperature by magnetron sputtering
Rasia LA, Mansano RD, Damiani LR, Viana CE |
| 4229 - 4235 |
C-11-radiolabeling study of nickel modified H-MCM-41 with methanol as a probe molecule
Sarkadi-Priboczki E, Tsoncheva T, Kumar N, Murzin DY |
| 4236 - 4250 |
Nanocrystalline filler induced changes in electrical and stability properties of a polymer nanocomposite electrolyte based on amorphous matrix
Shukla N, Thakur AK |
| 4251 - 4254 |
Core-shell composite of SiCN and multiwalled carbon nanotubes from toluene dispersion
Lehman JH, Hurst KE, Singh G, Mansfield E, Perkins JD, Cromer CL |
