| 2181 - 2198 |
Recent progress of synthesis and applications in polyoxometalate and nanogold hybrid materials
Jameel U, Zhu MQ, Chen XZ, Tong ZF |
| 2199 - 2242 |
Borate glasses for scientific and industrial applications: a review
Bengisu M |
| 2243 - 2258 |
Review on slip transmission criteria in experiments and crystal plasticity models
Bayerschen E, McBride AT, Reddy BD, Bohlke T |
| 2259 - 2273 |
The characterization and effects of microstructure on the appearance of platelet-polymer composite coatings
Seubert CM, Nichols ME, Frey J, Shtein M, Thouless MD |
| 2274 - 2282 |
Effect of the electron-accepting centre and solubilising substituents on the redox, spectroscopic and electroluminescent properties of four oxadiazoles and a triazole disubstituted with bithiophene
Kostyuchenko AS, Wiosna-Salyga G, Kurowska A, Zagorska M, Luszczynska B, Grykien R, Glowacki I, Fisyuk AS, Domagala W, Pron A |
| 2283 - 2291 |
Local polarization switching in Ba-Ni co-doped BiFeO3 thin films with low rhombohedral-symmetry distortion
Rojas-George G, Concha-Balderrama A, Esparza-Ponce H, Silva J, Galindo JTE, Cruz MP, Gervacio JJ, Graeve OA, Herrera G, Fuentes L, Reyes-Rojas A |
| 2292 - 2298 |
Influence of sintering pressure on the crystallization and mechanical properties of BN-MAS composite ceramics
Cai DL, Yang ZH, Duan XM, Zhang Q, Li Q, Li Q, Sun YS, Jia DC, Zhou Y |
| 2299 - 2306 |
Two-step thermochemical looping using modified ceria-based materials for splitting CO2
Zhao BH, Huang CY, Ran R, Wu XD, Weng D |
| 2307 - 2319 |
Monte Carlo simulation study of the halogenated MIL-47(V) frameworks: influence of functionalization on H2S adsorption and separation properties
Xu J, Xing W, Wang HF, Xu WB, Ding QY, Zhao LM, Guo WY, Yan ZF |
| 2320 - 2329 |
Fabrication of carbon nanotube/cobalt oxide nanocomposites via electrophoretic deposition for supercapacitor electrodes
Kumar N, Yu YC, Lu YH, Tseng TY |
| 2330 - 2337 |
A method for the direct growth of carbon nanotubes on macroscopic carbon substrates
Song RJ, Liu L, Yan DW, Xiong Y, Li CE |
| 2338 - 2346 |
Electrophoretic deposition of hydroxyapatite and hydroxyapatite-alginate on rapid prototyped 3D Ti6Al4V scaffolds
Kollath VO, Chen Q, Mullens S, Luyten J, Traina K, Boccaccini AR, Cloots R |
| 2347 - 2370 |
Failure processes governing high-rate impact resistance of epoxy resins filled with core-shell rubber nanoparticles
Bain ED, Knorr DB, Richardson AD, Masser KA, Yu J, Lenhart JL |
| 2371 - 2379 |
Effect of moisture on the measured tensile strength of polyacrylonitrile carbon fibers
Zhu SP, Yang YH, Feng ZH, Wang Y, Pan YX, Gao JL, Guo LJ, Zuo XB |
| 2380 - 2393 |
Equal-channel angular pressing: influence of die design on pressure forces, strain homogeneity, and corner gap formation
Sordi VL, Mendes AA, Valio GT, Springer P, Rubert JB, Ferrante M |
| 2394 - 2403 |
Novel low-cost hybrid composites from asphaltene/SBS tri-block copolymer with improved thermal and mechanical properties
Wu HC, Thakur VK, Kessler MR |
| 2404 - 2410 |
Effect of aging on the failure characteristics of E-glass fibers
Wang QW, Brow RK, Li H, Ronchetto EA |
| 2411 - 2419 |
One-step spraying to fabricate nonfluorinated superhydrophobic coatings with high transparency
Li Y, Men XH, Zhu XT, Ge B, Chu FJ, Zhang ZZ |
| 2420 - 2426 |
Room-temperature and fast response hydrogen sensor based on annealed nanoporous palladium film
Hao MM, Wu SH, Zhou H, Ye WB, Wei XB, Wang XR, Chen Z, Li SB |
| 2427 - 2442 |
Dopamine-assisted immobilization of partially hydrolyzed poly(2-methyl-2-oxazoline) for antifouling and biocompatible coating
Pan C, Chen LJ, Liu ST, Zhang YL, Zhang C, Zhu HK, Wang YM |
| 2443 - 2452 |
Synthesis and characterization of sustainable polyurethane based on epoxy soybean oil and modified by double-decker silsesquioxane
Huang J, Jiang PP, Li XT, Huang YD |
| 2453 - 2464 |
Electrical properties and conduction mechanism in carboxyl-functionalized multiwalled carbon nanotubes/poly(vinyl alcohol) composites
Amrin S, Deshpande VD |
| 2465 - 2480 |
Effects of film topology and contamination as a function of thickness on the photo-induced hydrophilicity of transparent TiO2 thin films deposited on glass substrates by spin coating
Chen WF, Koshy P, Sorrell CC |
| 2481 - 2489 |
Electrochemical lithiation/delithiation kinetics and capacity of phosphate tungsten bronze and its chemically pre-lithiated derivatives in aqueous solutions
Vujkovic M, Nedic Z, Tancic P, Aleksic OS, Nikolic MV, Mioc U, Mentus S |
| 2490 - 2498 |
Tensile-stress-induced growth of ellipsoidal omega-precipitates in a Ti-20wt%Mo alloy
Monzen R, Kawai R, Oyama T, Watanabe C |
| 2499 - 2511 |
Porous and fractal analysis on the permeability of nanofiltration membranes for the removal of metal ions
Agboola O, Mokrani T, Sadiku R |
| 2512 - 2528 |
Processing maps for the analysis of hot workability of microalloyed steels 38MnSiVS5 and 0.39C1.47Mn
Septimio RD, Button ST, Van Tyne CJ |
| 2529 - 2539 |
Microstructural evolution in 316LN austenitic stainless steel during solidification process under different cooling rates
Wu CF, Li SL, Zhang CH, Wang XT |
| 2540 - 2549 |
Modeling of structural hardening in oxide dispersion-strengthened (ODS) ferritic alloys
Zhong SY, Klosek V, de Carlan Y, Mathon MH |
| 2550 - 2557 |
Hollow Fe3O4@mesoporous carbon core-shell microspheres for efficient sorption of radionuclides
Xu SH, Zhao YG, Zheng FC, Zhang YG |
| 2558 - 2564 |
Co-carbonization effect of asphaltine and heavy oil in mesophase development
Guo YL, Li YM, Ran NN, Gao F |
| 2565 - 2572 |
Facile fabrication and enhanced photocatalytic performance of Ag@AgCl-activated sepiolite heterostructure photocatalyst
Liu SM, Zhu JL, Yang Q, Xu PP, Ge JH, Guo XT |
| 2573 - 2584 |
Surface area characteristics of furfuryl-alcohol-derived inverse opal carbons produced from silica inverse opal templates
McIntosh GJ, Metson JB |
| 2585 - 2593 |
The coupling relation between chain architectures and secondary flow field determined by an unusual dependence of shish-kebabs on molecular weight of high-density polyethylene
Zhang QP, Xia XC, He S, Feng JM, Yang MB, Zheng J, Li YT, Zhou YL |
| 2594 - 2597 |
Development and characterization of microporous Ti3SiC2 ceramic membranes for filtration of microorganisms
Liu XL, Zhang QK, Zhang HB, Jiang Y, He YH |
| 2598 - 2607 |
Hierarchical porous hydroxyapatite microspheres: synthesis and application in water treatment
Qi YC, Shen J, Jiang QY, Jin B, Chen JW, Zhang X, Su JL |
| 2608 - 2615 |
Phase transformation kinetics of omega-phase in pure Ti formed by high-pressure torsion
Adachi N, Todaka Y, Irie K, Umemoto M |
| 2616 - 2626 |
Tailoring dielectric properties of polymer composites by controlling alignment of carbon nanotubes
Liu ST, Tian M, Zhang LQ, Lu YL, Chan TW, Ning NY |
| 2627 - 2633 |
N,P-co-doped carbon nanowires prepared from bacterial cellulose for supercapacitor
Hu ZX, Li SS, Cheng PP, Yu WD, Li RC, Shao XF, Lin WR, Yuan DS |
| 2634 - 2642 |
Mesoporous manganese oxide for the degradation of organophosphates pesticides
St'astny M, Stengl V, Henych J, Tolasz J, Vomacka P, Ederer J |
| 2643 - 2652 |
Detailed dynamic rheological studies of multiwall carbon nanotube-reinforced acrylonitrile butadiene styrene composite
Jyoti J, Singh BP, Rajput S, Singh VN, Dhakate SR |
| 2653 - 2664 |
The thermal stability of topologically close-packed phases in the single-crystal Ni-base superalloy ERBO/1
Lopez-Galilea I, Kossmann J, Kostka A, Drautz R, Roncery LM, Hammerschmidt T, Huth S, Theisen W |
| 2665 - 2676 |
Thermodynamic and kinetic evidence for MgO formation and pinning behavior in glycine-doped MgB2 bulks
Cai Q, Guo QY, Liu YC, Ma ZQ, Li HJ |
| 2677 - 2686 |
Enzymatically treated natural fibres as reinforcing agents for biocomposite material: mechanical, thermal, and moisture absorption characterization
George M, Mussone PG, Alemaskin K, Chae M, Wolodko J, Bressler DC |
| 2687 - 2704 |
Hot tearing characteristics of Mg-2Ca-xZn alloys
Song JF, Wang Z, Huang YD, Srinivasan A, Beckmann F, Kainer KU, Hort N |
| 2705 - 2715 |
A new strategy for preparation of long-chain branched polypropylene via reactive extrusion with supercritical CO2 designed for an improved foaming approach
Wang K, Wang SS, Wu F, Pang YY, Liu W, Zhai WT, Zheng WG |
| 2716 - 2726 |
Preparation and properties of multifunctional thermochromic energy-storage wood materials
Hu L, Lyu SY, Fu F, Huang JD, Wang SQ |
| 2727 - 2738 |
Effect of hard segment architecture on shape memory properties of polycaprolactone-based polyurethane containing azobenzene
Wu XW, Liu LB, Fang WY, Qiao CD, Li TD |
| 2739 - 2746 |
Fabrication and characterization of silver nanoparticle impregnated uniaxially aligned fibre yarns by one-step electrospinning process
Mayuri PV, Ramesh P |
| 2747 - 2758 |
Effects of temperature and frequency on dynamic mechanical properties of glass/epoxy composites
Feng JM, Guo ZS |
| 2759 - 2760 |
Template-free electrochemical synthesis of tin nanostructures (vol 49, pg 1476, 2014)
Mackay DT, Janish MT, Sahaym U, Kotula PG, Jungjohann KL, Carter CB, Norton MG |
