| 1079 - 1082 |
Poly(ethylene glycol) interactions with alumina and silica powders determined via DRIFT
Derosa RL, Trapasso JA |
| 1083 - 1090 |
Preliminary study of the inhomogeneous precipitate distributions in Nb-microalloyed plate steels
Davis CL, Strangwood M |
| 1091 - 1100 |
Photo-sensitivity of recycled photo-degraded polystyrene
Stevenson W, White JR |
| 1101 - 1106 |
Effect of structure of interfacial coating layer on mechanical properties of continuous fiber reinforced reaction sintered silicon carbide matrix composite
Suyama S, Kameda T, Itoh Y |
| 1107 - 1113 |
Microstructure and environment-dependent fatigue crack propagation properties of Ti-48Al intermetallics
Hamada S, Hamada H, Suzuki H, Tamin MN, Nozue A |
| 1115 - 1119 |
The essential work of fracture through the wall of a uPVC pipe
Lau SW, Truss RW |
| 1121 - 1129 |
Thermal decomposition of bauxite minerals: infrared emission spectroscopy of gibbsite, boehmite and diaspore
Kloprogge JT, Ruan HD, Frost RL |
| 1131 - 1134 |
Nanosized hydroxyapatite powders derived from coprecipitation process
Kong LB, Ma J, Boey F |
| 1135 - 1142 |
Hot corrosion of Fe3Al
Das D, Balasubramaniam R, Mungole MN |
| 1143 - 1154 |
Microstructure and current-voltage characteristics of praseodymium-doped zinc oxide varistors containing MnO2, Sb2O3 and Co3O4
Hng HH, Knowles KM |
| 1155 - 1163 |
Effects of interface structures on cracking in AlN(11(2)over-bar0)/alpha-Al2O3(1(1)over-bar02) epitaxial films
Kaigawa K, Shibata T, Nakamura Y, Asai K, Tanaka M, Sakai H, Tsurumi T |
| 1165 - 1171 |
Electrical conductivity and defect structure of CeO2-ZrO2 mixed oxide
Lee JH, Yoon SM, Kim BK, Lee HW, Song HS |
| 1173 - 1178 |
Structure and properties of AIMgSi1 alloy tailored for semi-solid forming
Wabusseg H, Gullo GC, Uggowitzer PJ, Steinhoff K, Kaufmann H |
| 1179 - 1182 |
The microstructure of ZrO2-Ni-Si3N4 diffusion bonds
Vegter RH, Maeda M, Naka M, Den Ouden G |
| 1183 - 1188 |
Cell adhesion on modified polyethylene
Svorcik V, Rockova K, Dvorankova B, Broz L, Hnatowicz V, Ochsner R, Ryssel H |
| 1189 - 1195 |
Oxygen impurity in self-propagating high-temperature synthesis of NiAl
Biswas A, Roy SK, Singh JB, Madangopal K, Prabhu N |
| 1197 - 1201 |
Processing maps for hot deformation of alpha(2) aluminide alloy Ti-24Al-11Nb
Murty SVSN, Rao BN, Kashyap BP |
| 1203 - 1205 |
Phase relationship in the Gd-Ti-Al ternary system at 500 degrees C
Zhou HY, Zhan YZ, Yan JL, Yuan SL |
| 1207 - 1213 |
Early and late stages of demixing of a commercial Al-Li alloy
Triolo A, Lin JS, Triolo R |
| 1215 - 1221 |
Preparation of the HIPS/MA graft copolymer and its compatibilization in PA6/HIPS blends
Chen GX, Dong WF, Liu JJ |
| 1223 - 1227 |
Variation of defects in deformed L1(2) Al67Mn8Ti25 ordered intermetallic alloy during annealing
Zhang JX, Wang JC, Hu GX, Wu JS |
| 1229 - 1235 |
Mechanical milling of fullerene with carbide forming elements
Liu ZG, Tsuchiya K, Umemoto M |
| 1237 - 1245 |
Mechanical and electrical properties of heavily drawn Cu-Nb microcomposites with various Nb contents
Hong SI, Hill MA |
| 1247 - 1252 |
Thermal degradation behaviors of poly (dimethylsiloxane)-urethane-graft-poly (methyl methacrylate) copolymers based on various diisocyanates
Ma CCM, Du YC, Wang FY |
| 1253 - 1258 |
Interfacial microstructure and reaction of BN-coated single crystal Al2O3 fiber reinforced NiAl matrix composites
Wen KY, Hu WP, Reichert K, Gottstein G |
| 1259 - 1264 |
Rheological behavior of coextruded multilayer architectures
Beeaff DR, Hilmas GE |
| 1265 - 1272 |
Mechanical behavior and failure process during compressive and shear deformation of honeycomb composite at elevated temperatures
Lee HS, Hong SH, Lee JR, Kim YK |
| 1273 - 1279 |
Fabrication of new porcelain body using nonplastic raw materials by slip casting
Tai WP, Kimura K, Jinnai K |
