| 2277 - 2294 |
Models in thermoluminescence
Furetta C, Kitis G |
| 2295 - 2301 |
Microstructure, mechanical property and chemical property in Ni3Al-Ni3Ti-Ni3Nb-based multi-intermetallic alloys
Ohira K, Kaneno Y, Takasugi T |
| 2303 - 2314 |
Effect of iron and manganese contents on convection-free precipitation and sedimentation of primary alpha-Al(FeMn)Si phase in liquid Al-11.5Si-0.4Mg alloy
Cao X, Saunders N, Campbell J |
| 2315 - 2325 |
Atomistic simulations of the solubilization of single-walled carbon nanotubes in toluene
Grujicic M, Cao G, Roy WN |
| 2327 - 2334 |
Formation of intermetallic compound layers in Sn/Au/Sn diffusion couple during annealing at 433 K
Yamada T, Miura K, Kajihara M, Kurokawa N, Sakamoto K |
| 2335 - 2340 |
Study on novel second-order NLO azo-based chromophores containing strong electron-withdrawing groups and different conjugated bridges
Qiu L, Shen YQ, Hao JM, Zhai JF, Zu FH, Zhang T, Zhao YX, Clays K, Persoons A |
| 2341 - 2347 |
One-step synthesis of mesoporous PWA/SiO2 composite materials using triblock copolymer templates
Yun HS, Kuwabara M, Zhou HS, Honma I |
| 2349 - 2356 |
Characterization of cerium and copper species in Cu-Ce-Al oxide systems by temperature programmed reduction and electron paramagnetic resonance
Decarne C, Abi-Aad E, Kostyuk BG, Lunin VV, Aboukais A |
| 2357 - 2363 |
Immersion characteristics of electrolytic calcium phosphate coated Ti in simulated physiological fluid
Kuo MC, Yen SK |
| 2365 - 2370 |
Synthesis of nanocrystalline magnetite by mechanical alloying of iron and hematite
Alcala MD, Criado JM, Real C, Grygar T, Nejezchleba M, Subrt J, Petrovsky E |
| 2371 - 2386 |
Morphology, crystallography and defects of the intermetallic chi-phase precipitated in a duplex (delta+gamma) stainless steel
Redjaimia A, Proult A, Donnadieu P, Morniroli JP |
| 2387 - 2394 |
Thermal stability of Ti-V-Cr burn-resistant alloys
Zhu KY, Zhao YQ, Qu HL, Wu H |
| 2395 - 2398 |
Electrochemical copolymerization of furan and 3-methyl thiophene
Li L, Chen W, Xu N, Xiao ZG, Xue G |
| 2399 - 2410 |
Indentation crack initiation in ion-exchanged aluminosilicate glass
Morris DJ, Myers SB, Cook RF |
| 2411 - 2415 |
Single w/o microemulsion templating of CdS nanoparticles
Huang NM, Kan CS, Khiew PS, Radiman S |
| 2417 - 2421 |
Phase transformation behavior of nanocrystalline chi-alumina powder obtained by thermal decomposition of AIP in inert organic solvent
Mekasuwandumrong O, Praserthdam P, Inoue M, Pavarajarn V, Tanakulrungsank W |
| 2423 - 2427 |
Irradiation hardness in silica glass
Gao SJ, Ouyang SX, Wang TJ |
| 2429 - 2435 |
Kinetics of the alpha ->gamma phase transformation in LiAlO2 under various atmospheres within the 1073-1173 K temperatures range
Danek V, Tarniowy M, Suski L |
| 2437 - 2442 |
Comparison between techniques based on charge characterisation and capillary suction time for assessing the dispersion characteristics of concentrated slurry
Singh BP, Bhattacharjee S, Besra L, Sengupta DK |
| 2443 - 2449 |
Crystallization kinetics of Si-TCP bioceramic films
Pietak A, Sayer M, Stott MJ |
| 2451 - 2456 |
Microscopic examination of the interface region in AC8A/Al(18)B(4)O(33)w composites reinforced with as-received and artificial nitrided Al18B4O33 whiskers
Bi G, Rao QL, Song HW |
| 2457 - 2464 |
Materials analysis of stereolithography resins for use in Rapid Manufacturing
Hague R, Mansour S, Saleh N, Harris R |
| 2465 - 2472 |
Enhanced sandwich structure of powder-based composites
Dai WL |
| 2473 - 2480 |
Effect of continuous cooling heat treatment on interface characteristics of S45C/copper compound casting
Ho JS, Lin CB, Liu CH |
| 2481 - 2486 |
The effects of the biaxial stretching of leather on fibre orientation and tensile modulus
Sturrock EJ, Boote C, Attenburrow GE, Meek KM |
| 2487 - 2491 |
The preparation of nano-scale plate silver powders by visible light induction method
Zhou QF, Xu Z |
| 2493 - 2497 |
Proton conduction at the surface of Y-doped BaCeO3 and its application to an air/fuel sensor
Tomita A, Hibino T, Suzuki M, Sano M |
| 2499 - 2507 |
Influence of alumina content on the nucleation crystallization and microstructure of barium fluorphlogopite glass-ceramics based on 8SiO(2)center dot YAl(2)O(3)4MgO2MgF(2)BaO - Part I - Nucleation and crystallization behaviour
Henry J, Hill RG |
| 2509 - 2515 |
Influence of alumina content on the nucleation crystallization and microstructure of barium fluorphlogopite glass-ceramics based on 8SiO(2)center dot yAl(2)O(3)center dot 4MgO center dot 2MgF(2)center dot BaO - Part II - Microstructure, microhardness and machinability
Henry J, Hill RG |
| 2519 - 2522 |
Influence of strain rate change on corrosion fatigue behavior of A533B steel in simulated BWR water
Wu XQ, Katada Y |
| 2523 - 2528 |
Mechanically induced instability in Fe2Ti and mechanical alloying of Fe and Ti
Guedea J, Yee-Madeira H, Cabanas JG, Reguera E |
| 2529 - 2530 |
Vacancy formation energy of small particles
Qi WH, Wang MP |
| 2531 - 2534 |
Thermal stability of hydroxyapatite whiskers derived from the hydrolysis of alpha-TCP
Park HC, Baek DJ, Park YM, Yoon SY, Stevens R |
| 2535 - 2537 |
Effect of Mg on age hardening and precipitation behavior of an AlSiCuMg cast alloy
Wang GQ, Bian XF, Liu XF, Zhang JY |
| 2539 - 2541 |
Effect of boron addition on sintering of tungsten based alloys
Debata M, Upadhyaya A |
| 2543 - 2546 |
Investigation about the effect of previous impacts on the impact behavior of high impact polystyrene (HIPS)
Sahin T, Celik TS, Arici A |
| 2547 - 2551 |
Characterization of a new relaxor perovskite of Ba(Ni1/2Mo1/2)O-3
Durge NG, Nadkarni MS, Salvi SV |
| 2553 - 2556 |
On the grain size distributions obtained from different grain growth simulation techniques
Sun Y, Liu GQ, Wang C |
| 2557 - 2559 |
New approach to preparing unidirectional NiMnFeGa magnetic shape memory alloy
Zheng HX, Ma WZ, Lu YY, Xia MX, Li JG |
| 2561 - 2563 |
Solidification behavior of undercooled Ni-Pb hypermonotectic alloy
Xie H, Yang GC, Hao WX, Fan JF |
| 2565 - 2567 |
Ultrasonic sol-gel synthesis of Ag2V4O11 from V2O5 gel
Xie JG, Li JX, Dai ZX, Zhan H, Zhou YH |
| 2569 - 2571 |
Dependence of microstructure on the cooling rate for a modified austenite medium Mn steel
Liang GF, Xu ZM, Li JG |
| 2573 - 2575 |
Electrical resistance of Al2O3 fiber reinforced RuO2/glass hybrid composites during tensile loading
Jang BK, Okuhara Y, Matsubara H |
| 2577 - 2579 |
Experimental investigation of some parameters on isothermal cyclic fatigue creep behavior of AISI 3137 steel at low homologous regimes
Makaraci M |
| 2581 - 2584 |
Preparation of aqueous pigment slurry for decorating whiteware by ink jet printing
Obata S, Yokoyama H, Oishi T, Usui M, Sakurada O, Hashiba M |
| 2585 - 2587 |
Monoclinic to cubic phase transformation of ZrO2 induced by ball milling
Liu XF, Wang ZQ, Bian XF |
| 2589 - 2592 |
Crystallization and phase evolution of potassium titanates from alkoxide derived precipitates
Janes R, Knightley LJ |
| 2593 - 2595 |
Effect of double aging treatment on structure in Inconel 718 alloy
Wang CZ, Li RB |
| 2597 - 2599 |
Probabilistic modeling the deformation and failure in heterogeneous microstructure of Ti-6Al-4V
Kim TW |
| 2601 - 2603 |
Influence of fluorine content on the crystallization behavior of apatite-wollastonite glass-ceramics
Calver A, Hill RG, Stamboulis A |
| 2605 - 2607 |
Fracture toughness measurements of powder metallurgical (P/M) green compacts: A novel method of sample preparation
Degnan CC, Kennedy AR, Shipway PH |
| 2609 - 2612 |
Characterization of sputtered NiO films using XRD and AFM
Hotovy I, Huran J, Spiess L |
| 2613 - 2615 |
Microstructural control of metastable phase in rapidly solidified Ti-45Al-2Cr-2Nb alloy
Liu YC, Shi QZ, Yang GC, Zhou YH |
| 2617 - 2620 |
SEM online investigation of fatigue crack initiation and propagation in cast magnesium alloy
Wang XS, Fan JH |
| 2621 - 2623 |
Spark-plasma-sintering of bulk SrBi2Ta2O9 materials
Li BR, Wang XH, Han XQ, Qi XW, Li LT |
| 2625 - 2627 |
FTIR study of vanadium oxide nanotubes from lamellar structure
Chen W, Mai LQ, Peng JF, Xu Q, Zhu QY |
| 2629 - 2632 |
Effect of pigmentation on fracture toughness of paint films
Singh SK, Tambe SP, Kumar D |
| 2633 - 2636 |
Synthesis of magnetite nanoparticles in W/O microemulsion
Liu ZL, Wang X, Yao KL, Du GH, Lu QH, Ding ZH, Tao J, Ning Q, Luo XP, Tian DY, Xi D |
| 2637 - 2640 |
Transport properties of InAs epilayers grown on GaAs substrates by using the prelayer technique
Cai LC, Chen H, Bao CL, Huang Q, Zhou JM |
