| 2235 - 2249 |
Metal nanoclusters in glasses as non-linear photonic materials
Chakraborty P |
| 2251 - 2254 |
The chemistry of cements formed between zinc oxide and aqueous zinc chloride
Nicholson JW, Parker L |
| 2255 - 2268 |
The influence of the deformation temperature on the tensile properties of polyethylenes
Peacock AJ, Mandelkern L, Alamo RG, Fatou JG |
| 2269 - 2281 |
Effect of inclusions on the tensile properties of Al-7% Si-0.35% Mg (A356.2) aluminium casting alloy
Liu L, Samuel FH |
| 2283 - 2297 |
Incipient melting of Al5Mg8Si6Cu2 and Al2Cu intermetallics in unmodified and strontium-modified Al-Si-Cu-Mg (319) alloys during solution heat treatment
Samuel FH |
| 2299 - 2304 |
Microstructural development in cast alloys based on the beta-NiAl-beta ＇-Ni2AlTi-gamma ＇-Ni3Al-alpha-Cr system
Gale WF, Abdo ZAM |
| 2305 - 2312 |
Atomic force microscopy on tree-like crystals in polyvinylidene fluoride blends
Cramer K, Lima MFS, Magonov SN, Hellmann EH, Jacobs M, Hellmann GP |
| 2313 - 2317 |
Thermodynamic criterion of separated eutectic phenomena
Cao ZQ, Jin JZ, Dong L, Zheng XS, Cho YW, Oh YJ, Shim JD |
| 2319 - 2330 |
Combustion synthesis and mechanical properties of molybdenum disilicide composites reinforced with SiC particulate
Manomaisupat D, Wilkinson DS, Petric A |
| 2331 - 2338 |
High-strength and high-modulus poly(vinyl alcohol) by the gel-ageing method - Part II - The effect of the gel pressing temperature
Tanigami T, Suzuki H, Yamaura K, Matsuzawa S |
| 2339 - 2355 |
Kinetics of direct nitridation of pelletized silicon grains in a fluidized bed: experiment, mechanism and modelling
Jovanovic ZR |
| 2357 - 2363 |
Characterization of the damage process in short-fibre/thermoplastic composites by acoustic emission
Choi NS, Takahashi K |
| 2365 - 2369 |
Fabrication and transport properties of long-length doped Bi1.7Pb0.3Sr2Ca2-xMxCu3Oy conductors (M=B, Nb or Ag)
Khan MN, Kayani AN |
| 2371 - 2377 |
Preparation of monolithic crystalline lead titanate aerogels
Lobmann P, Glaubitt W, Muller G |
| 2379 - 2383 |
Single crystals of Dy1-xGdxVO4 for magnetic applications
Kimura H, Sato M, Terada Y, Shimamura K, Fukuda T, Miyashita S |
| 2385 - 2390 |
Stability of metastable phases and microstructures in the ageing process of Al-Mg-Si ternary alloys
Takeda M, Ohkubo F, Shirai T, Fukui K |
| 2391 - 2396 |
Grain growth in sol-gel derived alumina-zirconia composites
Srdic VV, Savic DI |
| 2397 - 2404 |
Mechanical properties of calcium- and strontium-substituted lanthanum chromite
Paulik SW, Baskaran S, Armstrong TR |
| 2405 - 2412 |
Joining of reaction-bonded silicon carbide using a preceramic polymer
Colombo P, Sglavo V, Pippel E, Woltersdorf J |
| 2413 - 2419 |
The electrochemical behaviour of direct strip casting stainless steel in acid solutions
Chou SL, Lin CY, Lee JT, Tsai WT |
| 2421 - 2429 |
The phase transformation toughening and synergism in poly(butylene terephthalate) poly(tetramethyleneglycol) copolymer-modified epoxies
Kim ST, Kim J, Lim S, Choe CR, Hong SI |
| 2431 - 2440 |
Processes involved during the production of Fe-W-Mo alloys by powder metallurgy
Barama SE, Harabi A, Cizeron G |
| 2441 - 2445 |
Effect of annealing on the structural and electrical properties of In2Te3
Hegab NA, Afifi MA, El-Shazly AE, Bekheet AE |
| 2447 - 2455 |
Self-sustaining oxidation of liquid aluminium and its alloys containing magnesium and silicon
Partington EC, Grieveson P, Terry B |
| 2457 - 2462 |
Tertiary creep and creep fracture in mechanically alloyed Al-C-O alloys
Dobes F |
| 2463 - 2467 |
Influence of sputtering atmosphere on crystallinity and crystal orientation of AlN thin films deposited on polycrystalline MoSi2 substrates
Akiyama M, Xu C, Nonaka K, Hagio T, Nishimura S, Shobu K, Watanabe T |
| 2469 - 2476 |
Mechanisms of surface deformation during cold rolling of aluminium
Gjonnes L, Andersson B |
