1 - 18 |
Design of a comfortable optimal driving strategy for electric vehicles using multi-objective optimization Nandi AK, Chakraborty D, Vaz W |
19 - 23 |
Control of voltage reversal in serially stacked microbial fuel cells through manipulating current: Significance of critical current density An J, Sim J, Lee HS |
24 - 36 |
An integrated approach for real-time model-based state-of-charge estimation of lithium-ion batteries Zhang C, Li K, Pei L, Zhu CB |
37 - 45 |
Thermal modeling of large prismatic LiFePO4/graphite battery. Coupled thermal and heat generation models for characterization and simulation Damay N, Forgez C, Bichat MP, Friedrich G |
46 - 53 |
Controlled modification of carbon nanotubes and polyaniline on macroporous graphite felt for high-performance microbial fuel cell anode Cui HF, Du L, Guo PB, Zhu B, Luong JHT |
54 - 60 |
Electrochemical properties of the ternary alloy Li5AlSi2 synthesized by reacting LiH, Al and Si as an anodic material for lithium-ion batteries Liu YF, Yan P, Ma RJ, Gao MX, Pan HG |
61 - 67 |
Role of morphology and crystallinity of nanorod and planar electron transport layers on the performance and long term durability of perovskite solar cells Fakharuddin A, Di Giacomo F, Ahmed I, Wali Q, Brown TM, Jose R |
68 - 73 |
In situ synchrotron wide-angle X-ray scattering study on rapid lithiation of graphite anode via direct contact method for Li-ion capacitors Park H, Kim M, Xu F, Jung C, Hong SM, Koo CM |
74 - 83 |
Silver/iron oxide/graphitic carbon composites as bacteriostatic catalysts for enhancing oxygen reduction in microbial fuel cells Ma M, You SJ, Gong XB, Dai Y, Zou JL, Fu HG |
84 - 94 |
Influence of the ionomer/carbon ratio for low-Pt loading catalyst layer prepared by reactive spray deposition technology Yu HR, Roller JM, Mustain WE, Maric R |
95 - 103 |
Strongly coupled metal oxide nanorod arrays with graphene nanoribbons and nanosheets enable novel solid-state hybrid cells Xiao JW, Xi JB, Xu YY, Yang SH, Jin YX, Xiao F, Wang S |
104 - 114 |
Tuning of platinum nano-particles by Au usage in their binary alloy for direct ethanol fuel cell: Controlled synthesis, electrode kinetics and mechanistic interpretation Dutta A, Mondal A, Datta J |
115 - 124 |
Gas diffusion layers coated with a microporous layer containing hydrophilic carbon nanotubes for performance enhancement of polymer electrolyte fuel cells under both low and high humidity conditions Kitahara T, Nakajima H, Okamura K |
125 - 131 |
Nickel foam-supported polyaniline cathode prepared with electrophoresis for improvement of rechargeable Zn battery performance Xia Y, Zhu DR, Si SH, Li DG, Wu S |
132 - 150 |
Non-isothermal electrochemical model for lithium-ion cells with composite cathodes Basu S, Patil RS, Ramachandran S, Hariharan KS, Kolake SM, Song T, Oh D, Yeo T, Doo S |
151 - 161 |
Stability of La0.6Sr0.4Co0.2Fe0.8O3/Ce0.9Gd0.1O2 cathodes during sintering and solid oxide fuel cell operation Kiebach R, Zhang WW, Zhang W, Chen M, Norrman K, Wang HJ, Bowen JR, Barfod R, Hendriksen PY |
162 - 170 |
Retarded phase transition by fluorine doping in Li-rich layered Li1.2Mn0.54Ni0.13Co0.13O2 cathode material Li L, Song BH, Chang YL, Xia H, Yang JR, Lee KS, Lu L |
171 - 180 |
Effect of relative humidity cycles accompanied by intermittent start/stop switches on performance degradation of membrane electrode assembly components in proton exchange membrane fuel cells Qiu YL, Zhong HX, Wang MR, Zhang HM |
181 - 186 |
Kinetics of the hydrogen oxidation reaction on nanostructured rhodium electrodes in alkaline solution Montero MA, de Chialvo MRG, Chialvo AC |
187 - 194 |
Sodium storage and transport properties in pyrolysis synthesized MoSe2 nanoplates for high performance sodium-ion batteries Wang H, Lan XZ, Jiang DL, Zhang Y, Zhong HH, Zhang ZP, Jiang Y |
195 - 203 |
Performance and stability improvements for dye-sensitized solar cells in the presence of luminescent coatings Bella F, Griffini G, Gerosa M, Turri S, Bongiovanni R |
204 - 210 |
A graphene loading heterogeneous hydrated forms iron based fluoride nanocomposite as novel and high-capacity cathode material for lithium/sodium ion batteries Shen YQ, Wang XY, Hu H, Jiang ML, Yang XK, Shu HB |
211 - 218 |
Correlation of oxygen non-stoichiometry to the instabilities and electrochemical performance of LiNi0.8Co0.1Mn0.1O2 utilized in lithium ion battery Bi YJ, Yang WC, Du R, Zhou JJ, Liu M, Liu Y, Wang DY |
219 - 236 |
Nanostructured cathode materials for rechargeable lithium batteries Myung ST, Amine K, Sun YK |
237 - 242 |
Fabrication of spinel Li4-xTi5O12 via ion exchange for high-rate lithium-ion batteries Cheng CL, Liu HJ, Li J, Xue X, Cao H, Wang DY, Shi LY |
243 - 250 |
Synthesis of lithium titanate nanorods as anode materials for lithium and sodium ion batteries with superior electrochemical performance Zhou Q, Liu L, Tan JL, Yan ZC, Huang ZF, Wang XY |
251 - 259 |
Tricobalt tetroxide nanoplate arrays on flexible conductive fabric substrate: Facile synthesis and application for electrochemical supercapacitors Nagaraju G, Ko YH, Yu JS |
260 - 269 |
New triarylamine sensitizers for high efficiency dye-sensitized solar cells: Recombination kinetics of cobalt(III) complexes at titania/dye interface Gao WX, Liang M, Tan YL, Wang M, Sun Z, Xue S |
270 - 278 |
Tunable synthesis of hierarchical NiCo2O4 nanosheets-decorated Cu/CuOx nanowires architectures for asymmetric electrochemical capacitors Kuang M, Zhang YX, Li TT, Li KF, Zhang SM, Li G, Zhang W |
279 - 288 |
Construction of a lithium ion transport network in cathode with lithiated bis(benzene sulfonyl)imide based single ion polymer ionomers Pan QY, Zhang WC, Pan MZ, Zhang BD, Zeng DL, Sun YB, Cheng HS |
289 - 299 |
Porous carbon nanotubes decorated with nanosized cobalt ferrite as anode materials for high-performance lithium-ion batteries Wang LY, Zhuo LH, Cheng HY, Zhang C, Zhao FY |
300 - 304 |
A tetradentate Ni(II) complex cation as a single redox couple for non-aqueous flow batteries Kim HS, Yoon T, Jang J, Mun J, Park H, Ryu JH, Oh SM |
305 - 313 |
Nitrogen-doped ordered cubic mesoporous carbons as metal-free counter electrodes for dye-sensitized solar cells Chen M, Shao LL, Liu YP, Ren TZ, Yuan ZY |
314 - 319 |
Multiple imaging mode X-ray computed tomography for distinguishing active and inactive phases in lithium-ion battery cathodes Babu SK, Mohamed AI, Whitacre JF, Litster S |
320 - 327 |
Effectiveness of paper-structured catalyst for the operation of biodiesel-fueled solid oxide fuel cell Quang-Tuyen T, Kaida T, Sakamoto M, Sasaki K, Shiratori Y |
328 - 328 |
Three-dimensional, sulfur-incorporated graphene aerogels for the enhanced performances of pseudocapacitive electrodes (vol 278, pg 484, 2015) Yu X, Park SK, Yeon SH, Park HS |
329 - 342 |
Modeling and experimental performance of an intermediate temperature reversible solid oxide cell for high-efficiency, distributed-scale electrical energy storage Wendel CH, Gao Z, Barnett SA, Braun RJ |
343 - 350 |
Theoretical insight into the interaction between Gallium Di-Corrole dyes and iodine in dye-sensitized solar cells (DSCs) Zhu C, Liang JX |
351 - 357 |
A room-temperature process for fabricating a nano-Pt counter electrode on a plastic substrate for efficient dye-sensitized cells Hsieh TY, Wei TC, Zhai P, Feng SP, Ikegami M, Miyasaka T |
358 - 371 |
Rechargeable Zn-air batteries: Progress in electrolyte development and cell configuration advancement Xu M, Ivey DG, Xie Z, Qu W |
372 - 380 |
Tantalum-doped lithium titanate with enhanced performance for lithium-ion batteries Guo M, Wang SQ, Ding LX, Huang CS, Wang HH |
381 - 388 |
Nanocube-based hematite photoanode produced in the presence of Na2HPO4 for efficient solar water splitting Liu K, Wang HY, Wu QP, Zhao J, Sun Z, Xue S |
389 - 396 |
Nitrogen-doped hierarchically porous carbon spheres as efficient metal-free electrocatalysts for an oxygen reduction reaction Liu YL, Shi CX, Xu XY, Sun PC, Chen TH |
397 - 407 |
Design and synthesis of MWNTs-TiO2 nanotube hybrid electrode and its supercapacitance performance Gao ZH, Cui ZD, Zhu SL, Liang YQ, Li ZY, Yang XJ |
408 - 415 |
Highly porous nickel@carbon sponge as a novel type of three-dimensional anode with low cost for high catalytic performance of urea electro-oxidation in alkaline medium Ye K, Zhang DM, Guo F, Cheng K, Wang GL, Cao DX |
416 - 422 |
A novel non-aqueous aluminum sulfur battery Cohn G, Ma L, Archer LA |
423 - 428 |
Unconventional irreversible structural changes in a high-voltage Li-Mn-rich oxide for lithium-ion battery cathodes Mohanty D, Sefat AS, Payzant EA, Li JL, Wood DL, Daniel C |
429 - 442 |
Development of novel proton exchange membrane fuel cells using stamped metallic bipolar plates Jung SP, Lee CI, Chen CC, Chang WS, Yang CC |
443 - 451 |
Highly crystalline Titania nanotube arrays realized by hydrothermal vapor route and used as front-illuminated photoanode in dye sensitized solar cells Zeng T, Ni HJ, Su XL, Chen YX, Jiang Y |
452 - 463 |
On active disturbance rejection in temperature regulation of the proton exchange membrane fuel cells Li DZ, Li C, Gao ZQ, Jin QB |
464 - 477 |
Reconstruction of relaxation time distribution from linear electrochemical impedance spectroscopy Zhang YX, Chen Y, Yan MF, Chen FL |
478 - 483 |
Hydrogenated ceria nanorods and nanobelts for photoelectrochemical application Yao CZ, Li ZP, Wei BH, Zhang JH, Zan JW, Wang GF, Li H, Gong QJ, Ma HX |
484 - 493 |
Hierarchical polypyrrole based composites for high performance asymmetric supercapacitors Chen GF, Liu ZQ, Lin JM, Li N, Su YZ |
494 - 504 |
Discrimination of degradation processes in lithium-ion cells based on the sensitivity of aging indicators towards capacity loss Bauer M, Guenther C, Kasper M, Petzl M, Danzer MA |
505 - 505 |
Facile one-pot synthesis of platinum nanoparticles decorated nitrogen-doped graphene with high electrocatalytic performance for oxygen reduction and anodic fuels oxidation (vol 277, pg 268, 2015) Navaee A, Salimi A, Soltanian S, Servati P |
506 - 516 |
Cost savings for manufacturing lithium batteries in a flexible plant Nelson PA, Ahmed S, Gallagher KG, Dees DW |
517 - 523 |
Failure propagation in multi-cell lithium ion batteries Lamb J, Orendorff CJ, Steele LAM, Spangler SW |
524 - 529 |
A novel laminated separator with multi functions for high-rate dischargeable lithium-sulfur batteries Cai WL, Li GR, He F, Jin LM, Liu BH, Li ZP |
530 - 530 |
Enhanced lithiation and fracture behavior of silicon mesoscale pillars via atomic layer coatings and geometry design (vol 248, pg 447, 2014) Ye JC, An YH, Heo TW, Biener MM, Nikolic RJ, Tang M, Jiang H, Wang YM |
531 - 531 |
Ionic liquids in lithium battery electrolytes: Composition versus safety and physical properties (vol 275, pg 935, 2015) Wilken S, Xiong SZ, Scheers J, Jacobsson P, Johansson P |
532 - 532 |
Electrocatalytic activities of cathode electrodes for water electrolysis using tetra-alkyl-ammonium-sulfonic acid ionic liquid as electrolyte (vol 280, pg 12, 2015) Fiegenbaum F, de Souza MO, Becker MR, Martini EMA, de Souza RF |