| 24 - 24 |
Trends in plastics market - External service providers as the third column of research and development
Stebani J |
| 30 - 30 |
Low-density polyethylene (PE-LD, PE-LLD)
Beer G, Justus C, Mantel R, Muller WF, Vogt H, Vogt M |
| 36 - 36 |
High-density polyethylene (PE-HD)
Beer G, Danz H, Justus C, Mantel R, Schnorr J, Vogt M, Weber A |
| 44 - 44 |
Polypropylene (PP)
Wolfsberger A, Gahleitner M, Wachholder M |
| 52 - 52 |
Polystyrol (PS)
Wagner D |
| 58 - 58 |
Expandable polystyrene (EPS)
Klement E |
| 64 - 64 |
Polyvinyl chloride (PVC)
Rehm T |
| 72 - 72 |
Polyamide (PA)
Neuhaus R, Uske K |
| 78 - 78 |
Polycarbonate (PC)
Laue HJ, Loewer H |
| 86 - 86 |
Polyoxymethylene (POM)
Disch S, Jurcec S, Katalenic N |
| 94 - 94 |
Styrene copolymers (ABS, ASA, SAN)
Chrisochoou A, Dufour D |
| 99 - 99 |
Polybutylene terephthalate (PBT)
Stern A |
| 106 - 106 |
Thermoplastic Elastomers (TPE)
Werner T, Fehlings M |
| 111 - 111 |
Polyethylene terephthalate (PET) - For packaging
Fritsch K, Welle F |
| 116 - 116 |
Polymethyl methacrylate (PMMA)
Albrecht K, Schafer M, Traxler M |
| 122 - 122 |
Liquid crystal polymers (LCP)
Hofmann A |
| 125 - 125 |
Polyarylsulphones (PSU, PPSU, PES)
Queisser J, Bluhm R, Trotte B |
| 130 - 130 |
Polyphenylene sulphide (PPS)
Mermans B |
| 135 - 135 |
Polyaryletherketones (PAEK)
Reimer W, Weidig R |
| 138 - 138 |
Polyurethanes (PU)
Ludke H, Albus S |
| 146 - 146 |
Thermosets
Bittmann E |
| 157 - 157 |
Plastic extrusion dies - The die material influences the melt flow behaviour
Seidel C, Merten A, Munstedt H |
| 161 - 161 |
Simulation model confirmed - Die design for pipe and sheet extrusion
Limper A, Stieglitz H |
