| 1611 - 1622 |
Fluid mechanics analysis of a two-dimensional pultrusion die inlet
Sharma D, McCarty TA, Roux JA, Vaughan JG |
| 1623 - 1632 |
The effect of a new type of pin mixing section on the performance of a single-screw extruder
Yao WG, Takahashi K, Koyama K, Yamashita Y |
| 1633 - 1639 |
New process for producing an extrusion laminated film without any chemical primer - Non anchor coating extrusion laminating process
Hayashida H, Ishibashi F, Takahata H, Nishio T, Gotoh Y, Sato Y |
| 1640 - 1648 |
Transport properties of methanol in blends of a liquid crystalline copolyester and polyethersulfone
Wiberg G, Hedenqvist MS, Boyd RH, Gedde UW |
| 1649 - 1657 |
Carbon black-filled immiscible blends of poly(vinylidene fluoride) and high density polyethylene : Electrical properties and morphology
Feng JY, Chan CM |
| 1658 - 1665 |
The role of specific interactions and transreactions on the compatibility of polyester ionomers with poly(ethylene terephthalate) and nylon 6,6
Boykin TL, Moore RB |
| 1666 - 1674 |
Diffuse reflectance and transmittance of IR absorbing polymer film
Ho WD, Ma CCM, Wu LC |
| 1675 - 1684 |
Low-rate dynamic contact angles on polystyrene and the determination of solid surface tensions
Kwok DY, Lam CNC, Li A, Zhu K, Wu R, Neumann AW |
| 1685 - 1693 |
Transient elongational viscosity of LLDPE/LDPE blends and its relevance to bubble stability in the film blowing process
Micic P, Bhattacharya SN, Field G |
| 1694 - 1707 |
Functionalization of ethylene-propylene-diene terpolymer via the Alder ene reaction
Thompson MR, Tzoganakis C, Rempel GL |
| 1708 - 1715 |
Mechanism of void growth in the partial frame process
Ahn KH, Kim DH |
| 1716 - 1728 |
A quantitative analysis of low density polyethylene and linear low density polyethylene blends by differential scanning calorimetry and Fourier transform infrared spectroscopy methods
Prasad A |
| 1729 - 1739 |
A three-dimensional analysis of the effect of die body deflection in the design of extrusion dies
Gifford WA |
| 1740 - 1750 |
Profile control of plastic sheet in an industrial polymer processing process
Liang Y, Kurihara K, Saito K, Murakami H, Kumagai K, Ohshima M, Tanigaki M |
| 1751 - 1762 |
Phase inversion during compounding with a low melting major component : Polycaprolactone/polyethylene blends
Ratnagiri R, Scott CE |
| 1763 - 1769 |
The effects of particle bulk modulus on toughening mechanisms in rubber-modified polymers
Chen XH, Mai YW |
| 1770 - 1777 |
The use of birefringence for predicting the stiffness of injection molded polycarbonate discs
Neves NM, Pouzada AS, Voerman JHD, Powell PC |
