| 1047 - 1055 |
Surface modification of plasma-pretreated high density polyethylene films by graft copolymerization for adhesion improvement with evaporated copper
Ng CM, Oei HP, Wu SY, Zhang MC, Kang ET, Neoh KG |
| 1056 - 1064 |
Interfacial instabilities in coextrusion flows of low-density polyethylenes: Experimental studies
Tzoganakis C, Perdikoulias J |
| 1065 - 1073 |
Rheological behavior of highly filled ethylene propylene diene rubber compounds
Markovic MG, Choudhury NR, Dimopoulos M, Matisons JG, Dutta NK, Bhattacharya AK |
| 1074 - 1084 |
Modeling of the plasticating process in a single-screw extruder: A fast-track approach
Lai E, Yu DW |
| 1085 - 1094 |
Experimental study on extrudate swell and die geometry of profile extrusion
Lee WS, Ho HY |
| 1095 - 1106 |
The effects of kneading block design and operating conditions on distributive mixing in twin screw extruders
Shearer G, Tzoganakis C |
| 1107 - 1113 |
In-line monitoring of polyethylene density using near infrared (MIR) spectroscopy
Nagata T, Ohshima M, Tanigaki M |
| 1114 - 1121 |
Kinetic study of the degradation of a new aromatic polyethersulfone
Abate L, Pappalardo A, Recca A |
| 1122 - 1131 |
Single and double bubble tubular film extrusion of polyethylene 2,6-naphthalate (PEN)
Song KJ, White JL |
| 1132 - 1142 |
Blends of linear and branched polyethylenes
Lee HS, Denn MM |
| 1143 - 1156 |
Blending of immiscible polymers in a mixing zone of a twin screw extruder - Effects of compatibilization
Franzheim O, Rische T, Stephan M, MacKnight WJ |
| 1157 - 1164 |
Spatial and temporal control of the degree of cure in polymer composite structures
Shull PJ, Hurley DH, Spicer JWM, Spicer JB |
| 1165 - 1176 |
Co-injection molding: Effect of processing on material distribution and mechanical properties of a sandwich molded plate
Selden R |
| 1177 - 1189 |
Phosphorylation of phosphazenes and its effects on thermal properties and fire retardant behavior
Allcock HR, Taylor JP |
| 1190 - 1199 |
Post-yield behavior of thermoplastics and the application to finite element analysis
Fesko DG |
| 1200 - 1210 |
Structure-property relationship in polyurethane elastomers containing starch as a crosslinker
Desai S, Thakore IM, Sarawade BD, Devi S |
| 1211 - 1215 |
Improvement of the mechanical properties of chitosan films by the addition of poly(ethylene oxide)
Alexeev VL, Kelberg EA, Evmenenko GA, Bronnikov SV |
| 1216 - 1225 |
On the properties and processing of polyethylene terephthalate/styrene-butadiene rubber blend
Sanchez-Solis A, Estrada MR, Cruz J, Manero O |
| 1226 - 1231 |
Thermoanalysis and rheological behavior of emulsion copolymers of methyl methacrylate, N-phenylmaleimide and styrene
Gao JG, Liu GD, Yang LT, Zhang LC |
| 1232 - 1247 |
Production of injection molding tooling with conformal cooling channels using the three dimensional printing process
Sachs E, Wylonis E, Allen S, Cima M, Guo HL |
| 1248 - 1255 |
Two-component photoresists containing thermally crosslinkable photoacid generators
Moon SY, Chung CM |
| 1256 - 1262 |
An experimental matrix design to optimize the weldline strength in injection molded parts
Liu SJ, Wu JY, Chang JH, Hung SW |
