1 - 5 |
Magnetic and optical investigations on LaFeO3 powders with different particle sizes and corresponding ceramics Koferstein R, Jager L, Ebbinghaus SG |
6 - 16 |
Model-based characterization of charged-defect transport and apparent gas-phase permeation in mixed-conducting perovskite membranes Sanders MD, Zhu HY, Kee RJ, O'Hayre RP |
17 - 25 |
Comparative study of electrochemical properties of mixed conducting Ln(2)NiO(4) (+) (delta) (Ln = La, Pr and Nd) and La0.6Sr0.4Fe0.8Co0.2O3 (-) (delta) as SOFC cathodes associated to Ce0.9Gd0.1O2 (-) (delta), La0.8Sr0.2Ga0.8Mg0.2O3 (-) (delta) and La9Sr1Si6O26.5 electrolytes Philippeau B, Mauvy F, Mazataud C, Fourcade S, Grenier JC |
26 - 33 |
Effects of infiltrated Sr and Mn doped LaCrO3 on porous La0.8Sr0.2Ga0.8Mg0.2O3-delta scaffolds used as anodes in solid oxide fuel cells Yoon BY, Kim JH, Bae J |
34 - 40 |
An in-situ neutron diffraction study of the crystal structure of PrBaCo2O5 (+) (delta) at high temperature and controlled oxygen partial pressure Cox-Galhotra RA, Huq A, Hodges JP, Yu CF, Wang XQ, Gong WQ, Jacobson AJ, McIntosh S |
41 - 48 |
Solid state NMR structural studies of the lithiation of nano-silicon: Effects of charging capacities, host-doping, and thermal treatment Cattaneo AS, Dupke S, Schmitz A, Badillo JP, Winter M, Wiggers H, Eckert H |
49 - 55 |
Lithium borophosphate thin film electrolyte as an alternative to LiPON for solder-reflow processed lithium-ion microbatteries Fleutot B, Pecquenard B, Martinez H, Levasseur A |
56 - 62 |
SIMS of thin films grown by pulsed laser deposition on isotopically labeled substrates Stender D, Cook S, Kilner JA, Dobeli M, Conder K, Lippert T, Wokaun A |
63 - 71 |
Li-ion battery separator membranes based on poly(vinylidene fluoride-trifluoroethylene)/carbon nanotube composites Nunes-Pereira J, Costa CM, Leones R, Silva MM, Lanceros-Mendez S |
72 - 77 |
Carbon-coated TiP2O7 with improved cyclability in aqueous electrolytes Li CG, Sun XH, Du Q, Zhang HP |
78 - 85 |
Theoretical modeling of electrode impedance for an oxygen ion conductor and metallic electrode system based on the interfacial conductivity theory. Part II: Case of the limiting process by non-steady-state surface diffusion Kobayashi K, Terabe K, Sukigara T, Sakka Y |
86 - 92 |
Determination of electronic and ionic conductivity in mixed ionic conductors: HiTEC and in-situ impedance spectroscopy analysis-of isovalent and aliovalent doped BaTiO3 Lee S, Randall CA |
93 - 97 |
A novel electrospun PVDF/PMMA gel polymer electrolyte with in situ TiO2 for Li-ion batteries Zhou L, Wu N, Cao Q, Jing B, Wang XY, Wang Q, Kuang H |
98 - 104 |
Efficiency of a dense thin CGO buffer layer for solid oxide fuel cell operating at intermediate temperature Constantin G, Rossignol C, Briois P, Billard A, Dessemond L, Djurado E |
105 - 111 |
High capacity Li[Ni0.8Co0.1Mn0.1]O-2 synthesized by sol-gel and co-precipitation methods as cathode materials for lithium-ion batteries Lu HQ, Zhou HT, Svensson AM, Fossdal A, Sheridan E, Lu SG, Vullum-Bruer F |
112 - 116 |
Influence of wet atmosphere on electrical and transport properties of lanthanum strontium cobalt ferrite cathode materials for protonic ceramic fuel cells Ji HI, Choi SM, Yoon KJ, Son JW, Kim BK, Lee HW, Lee JH |
117 - 122 |
Effect of chromium coating on nanosilicon anodes for lithium ion batteries Lee JK, Kim BK, Yoon WY |
123 - 128 |
In situ oxygen surface exchange coefficient measurements on lanthanum strontium ferrite thin films via the curvature relaxation method Yang Q, Burye TE, Lunt RR, Nicholas JD |
129 - 133 |
Synthesis and electrochemical performance of modified LiMn2O4 by Zn2+ and PO43- co-substitution Cui P, Liang Y |
134 - 138 |
Novel solid-state preparation and electrochemical properties of Li-1.13 [Ni0.2Co0.2Mn0.47]O-2 material with a high capacity by acetate precursor for Li-ion batteries Zhou LZ, Xu QJ, Liu MS, Jin X |
139 - 143 |
Structure and ionic conductivity of nanoscale gadolinia-doped ceria thin films Jiang J, Shen W, Hertz JL |
144 - 150 |
Effects of ultraviolet illumination and temperature on ionic motion in single-crystalline CuIn2Te3.5 Diaz R, Arranz A |
151 - 157 |
Enhanced reversible capacity of Li4Ti5O12-coated TiO2 nanocomposites as lithium-ion battery anodes Lai C, Cao XL, Yuan XC, Wang YL, Ye SH |
158 - 164 |
Tween40 surfactant effect on the formation of nano-sized LiFePO4/C powder via a solid state reaction and their cathode properties Huang YG, Zheng FH, Zhang XH, Li YH, Yin JC, Li QY |
165 - 170 |
Effect of Al- or Ga-additive on ionic conductivity of thin-film Gd-doped ceria Lee Y, Joo JH, Choi GM |
171 - 176 |
Effect of MnO2 coating on layered Li(Li0.1Ni0.3Mn0.5Fe0.1)O-2 cathode material for Li-ion batteries Uzun D, Dogrusoz M, Mazman M, Bicer E, Avci E, Sener T, Kaypmaz TC, Demir-Cakan R |
177 - 183 |
Influence of sulfur impurities on the stability of La0.6Sr0.4Co0.2Fe0.8O3 cathode for solid oxide fuel cells Xie J, Ju YW, Ishihara T |
184 - 190 |
Electronic properties of Ca doped LaFeO3: A first-principles study Pushpa R, Daniel D, Butt DP |