| 3019 - 3039 |
Elastic properties and short-to medium-range order in glasses
Rouxel T |
| 3040 - 3046 |
Flow kinetics in porous ceramics: Understanding with non-uniform capillary models
Patro D, Bhattacharyya S, Jayaram V |
| 3047 - 3056 |
Fabrication of net-shape functionally graded composites by electrophoretic deposition and sintering: Modeling and experimentation
Olevsky EA, Wang X, Maximenko A, Meyers MA |
| 3057 - 3062 |
Microstructural characterization and role of glassy layer developed on inconel 690 during a nuclear high-level waste vitrification process
Sengupta P, Kaushik CP, Mishra RK, Kale GB |
| 3063 - 3069 |
Combustion synthesis of AlON-BN composites under low nitrogen pressure
Jung J, Baik S |
| 3070 - 3072 |
Effect of antimony concentration on the crystalline structure, dielectric, and piezoelectric properties of (Na0.5K0.5)(0.945)Li0.055Nb1-xSbxO3 solid solutions
Li H, Shih WY, Shih WH |
| 3073 - 3084 |
On densification of porous materials using precursor solutions
Mogilevsky P, Kerans RJ, Lee HD, Keller KA, Parthasarathyz TA |
| 3085 - 3090 |
Synthesis of nanocrystalline chromium nitride powder by mechanical processing
Real C, Roldan MA, Alcala MD, Ortega A |
| 3091 - 3094 |
Low-temperature fine-grained alumina-aluminum titanate composites produced from a titania-coated alumina precursor
Mani J, Ananthakumar S, Mukundan P, Warrier KG |
| 3095 - 3098 |
Hydrothermal synthesis and photoluminescence properties of La2-xEuxSn2O7 (x=0-2.0) nanocrystals
Zhu HL, Yang DR, Zhu LM, Li DS, Chen PH, Yuz GX |
| 3099 - 3105 |
Enhancement of ionic conductivity of apatite-type lanthanum silicates doped with cations
Yoshioka H |
| 3106 - 3112 |
Magneto-dielectric properties of Mg-Cu-Co ferrite ceramics: I. Densification behavior and microstructure development
Kong LB, Li ZW, Lin GQ, Gan YB |
| 3113 - 3120 |
Synthesis, structure, and electrochemical characterization of nanocrystalline tantalum and tungsten nitrides
Choi D, Kumta PN |
| 3121 - 3126 |
Influence of ag on the composition and electromagnetic properties of low-temperature cofired hexaferrites
Lisjak D, Drofenik M |
| 3127 - 3130 |
Effect of Zn/Si ratio on the microstructural and microwave dielectric properties of Zn2SiO4 ceramics
Nguyen NH, Lim JB, Nahm S, Paik JH, Kim JH |
| 3131 - 3137 |
Effects of silver doping on the sol-gel-derived Ba-4(Nd0.7Sm0.3)(9.33)Ti18O54 microwave dielectric ceramics
Pei J, Yue ZX, Zhao F, Gui ZL, Li LT |
| 3138 - 3141 |
Enhanced flux pinning of an nd-added (Bi,Pb)-2212 superconductor
Sarun PM, Biju A, Guruswamy P, Syamaprasad U |
| 3142 - 3147 |
Doping effects of Ta on conductivity and microwave dielectric loss of MgTiO3 ceramics
Kuang XJ, Xia HT, Liao FH, Wang CH, Li L, Jing XP, Tang ZX |
| 3148 - 3155 |
Structural and dielectric characteristics in a Ca(Mg1/3Nb2/3)O-3-CaZrO3 system
Lee CT, Huang CY, Lin YC, Yang J |
| 3156 - 3159 |
Photoluminescent properties of (Ca,Zn)TiO3 : Pr,B particles synthesized by the peroxide-based route method
Wanjun T, Donghua C |
| 3160 - 3166 |
Thermal stability of air plasma spray and solution precursor plasma spray thermal barrier coatings
Chen DY, Gell M, Jordan EH, Cao E, Ma XQ |
| 3167 - 3170 |
Phase transitions in Pb(Mg1/3Nb2/3)O-3-PbTiO3 studied by low-frequency internal friction measurement
Yan F, Bao P, Zhu JS, Wang YN, Chan HLW, Choy CL |
| 3171 - 3176 |
Novel composites constituted from hafnia and a polymer-derived ceramic as an interface: Phase for severe ultrahigh temperature applications
Brahmandam S, Raj R |
| 3177 - 3184 |
Alumina/zirconia micro/nanocomposites: A new material for biomedical applications with superior sliding wear resistance
Bartolome JF, De Aza AH, Martin A, Pastor JY, Llorca J, Torrecillas R, Bruno G |
| 3185 - 3193 |
In-plane cracking behavior and ultimate strength for 2D woven and braided melt-infiltrated SiC/SiC composites tensile loaded in off-axis fiber directions
Morscher GN, Yun HM, DiCarlo JA |
| 3194 - 3204 |
Ab initio calculation of elastic constants of ceramic crystals
Yao HZ, Ouyang LZ, Ching WY |
| 3205 - 3212 |
Quantitative phase analysis of laboratory-active belite clinkers by synchrotron powder diffraction
Morsli K, de la Torre AG, Stober S, Cuberos AJM, Zahir M, Aranda MAG |
| 3213 - 3219 |
Thermodynamically stable SixOyCz polymer-like amorphous ceramics
Varga T, Navrotsky A, Moats JL, Morcos RM, Poli F, Muller K, Sahay A, Raj R |
| 3220 - 3223 |
Effects of TiO2 seeding layer on crystalline orientation and ferroelectric properties of Bi3.15Nd0.85Ti3O12 thin films fabricated by a sol-gel method
Li J, Yu J, Peng G, Wang YB, Zhou WL |
| 3224 - 3226 |
Thermodynamic characterization of the eutectic phase mixture NaNbO3/Na3NbO4. I: Literature survey
Nafe H, Amin R, Aldinger F |
| 3227 - 3232 |
Thermodynamic characterization of the eutectic phase mixture NaNbO3/Na3NbO4. II: Solid-state electrochemical investigation
Nafe H, Amin R, Aldinger F |
| 3233 - 3238 |
Rapid oxidation characterization of ultra-high temperature ceramics
Karlsdottir SN, Halloran JW |
| 3239 - 3247 |
Microstructure development in low-antimony oxide-doped zinc oxide ceramics
Bernik S, Bernard J, Daneu N, Recnik A |
| 3248 - 3254 |
Orientation control in sol-gel-derived BiScO3-PbTiO3 thin films
Wen H, Wang XH, Li LT |
| 3255 - 3262 |
Enhanced shrinkage of lanthanum strontium manganite (La0.90Sr0.10MnO3+delta) resulting from thermal and oxygen partial pressure cycling
McCarthy BP, Pederson LR, Anderson HU, Zhou XD, Singh P, Coffey GW, Thomsen EC |
| 3263 - 3267 |
Formaldehyde-, benzene-, and xylene-sensing characterizations of Zn-W-O nanocomposite ceramics
Ge CQ, Xie CS, Zeng DW, Caiy SZ |
| 3268 - 3273 |
Roles of oxygen and hydrogen in the amorphization of cristobalite
Xu CM, Wang SW, Nogami MY, Zhou GH, Zhuz HP |
| 3274 - 3281 |
Structure development of NiO-YSZ oxide mixtures in simulated citrate-nitrate combustion synthesis
Marinsek M, Gomilsek JP, Arcon I, Ceh M, Kodre A, Macek J |
| 3282 - 3288 |
A new approach to modeling the nucleation and growth kinetics of tricalcium silicate hydration
Thomas JJ |
| 3289 - 3292 |
Effects of additive on the microwave synthesis of AIN powder
Zeng XF, Qian DF, Li WF, Peng H, Lei C, Liu XY |
| 3293 - 3295 |
Porous Pb(Zr0.95Ti0.05)O-3 ceramics from chemically prepared powders without pore formers
Qiu SJ, Fan HQ, Yang C, Chen J |
| 3296 - 3298 |
Attaining a homogeneous microstructure of a ZnO-Based multilayer varistor by constrained sintering
Lee WH, Chen WT, Su CY |
| 3299 - 3302 |
Crystal structure and thermoelectric properties of YAl3C3
Fukuda K, Hisamura M |
| 3303 - 3306 |
Homogeneous TiB2 ceramics achieved by electric current-assisted self-propagating reaction sintering
Salamon D, Eriksson M, Nygren M, Shen Z |
| 3307 - 3310 |
Silica glass segregation in 3 wt% LiF-Doped hot-pressed Y2Si2O7
MacLaren I, Schierholz R, Trusty PA, Ponton CB |
| 3311 - 3313 |
Electron beam-induced "nanocalcination" of boehmite nanostrips to mesoporous alpha-alumina phase
Arami H, Mazloumi M, Khalifehzadeh R, Khatiboleslam S, Sadrnezhaadw SK |
| 3314 - 3317 |
The isoelectric point of lead magnesium niobate
Deliormanli AM, Celik E, Polat M |
| 3318 - 3319 |
Vacuum strength of two candidate glasses for a space observatory
Manning TA, Tucker DS, Herren KA, Gregory DA |
| 3320 - 3322 |
Fabrication and characterization of an ultra-high-temperature carbon fiber-reinforced ZrB2-SiC matrix composite
Tang SF, Deng JY, Wang SJ, Liu WC |
| 3323 - 3325 |
Space charge signature and its effects on ionic transport in heterogeneous solids
Kumar B, Thokchom JS |
| 3326 - 3330 |
Revised method for the prediction of lattice constants in cubic and pseudocubic perovskites
Ubic R |
| 3331 - 3333 |
Machinable Ti3SiC2/Hydroxyapatite bioceramic composites by spark plasma sintering
Shi SL, Pan W |
| 3334 - 3337 |
Diode-pumped Yb : YAG ceramic laser
Wu YS, Li JA, Pan YB, Guo JK, Jiang BX, Xu Y, Xu J |
| 3338 - 3340 |
Microstructures and piezoelectric properties in the Li2O-Excess 0.95(Na0.5K0.5)NbO3-0.05LiTaO(3) ceramics
Kim MS, Jeong SJ, Song JS |
| 3341 - 3344 |
Contact damage of silicon carbide/boron nitride nanocomposites
Kusunose T, Sekino T, Niihara K |
| 3345 - 3348 |
Improvement in the temperature stability of a BaTiO3-Based multilayer ceramic capacitor by constrained sintering
Lee WH, Su CY |
| 3349 - 3352 |
Characterization of mn-zn ferrite prepared by a hydrothermal process from used dry batteries and waste steel pickling liquor
Liu CW, Lin CH, Fu YP |
| 3353 - 3356 |
Nd/V co-doped Bi4Ti3O12 powder prepared by molten salt synthesis
Tang QY, Kan YM, Wang PL, Li YG, Zhang GJ |
| 3357 - 3359 |
Fabrication of highly porous samaria-doped ceria by acid leaching magnesia from magnesia-samaria-doped ceria ceramics
Wang FY, Jung GB, Su A, Chan SH, Li XA, Xiao L |
| 3360 - 3363 |
Effect of albumin on the growth characteristics of hydroxyapatite coatings on alumina substrates
Chakraborty J, Chatterjee S, Sinha MK, Basu D |
| 3364 - 3366 |
Ba0.5Sr0.5Zn0.2Fe0.8O3-delta perovskite oxide as a novel cathode for intermediate-temperature solid-oxide fuel cells
Wei B, Lu Z, Huang X, Liu Z, Miao J, Li N, Su W |
| 3367 - 3368 |
Comment on "Microwave plasma synthesis of nanostructured gamma-Al2O3 powders"
Wang H, Zhu H |
| 3369 - 3369 |
Response to comment on "Microwave plasma synthesis of nanostructured gamma-Al2O3 powders"
Dravid VP, Zheng JG |
| 3370 - 3370 |
Tunable linear thermal expansion coefficient of amorphous zirconium tungstate (Vol 89, pg 2341, 2006)
Catafesta J, Zorzi JE, Perottoni CA, Gallas MR, Da Jornada JAH |
| 3371 - 3371 |
Inter-Conversion of M(n+1)AX(n) phases in the Ti-Al-C system (Vol 90, pg 1912, 2007)
Kisi EH, Wu E, Zobec JS, Forrester JS, Riley DP |
