| 2979 - 2997 |
Impedance spectroscopy as a tool for chemical and electrochemical analysis of mixed conductors: A case study of ceria
Lai W, Haile SM |
| 2998 - 3002 |
Sol-gel-processed SiO2/TiO2/methylcellulose composite materials for optical waveguides
Chen W, Tao XM, Zhang JY, Fang Q, Yang J |
| 3003 - 3007 |
Centrifugal casting of tubular perovskite membranes
Mertins FHB, Kruidhof H, Bouwmeester HJM |
| 3008 - 3012 |
A novel approach to sintering nanocrystalline barium titanate ceramics
Polotai A, Breece K, Dickey E, Randall C, Ragulya A |
| 3013 - 3019 |
Sintering analysis of undoped and cobalt oxide doped ceria solid solutions
Jud E, Huwiler CB, Gauckler LJ |
| 3020 - 3023 |
A chemical route to large-scale preparation of spherical and monodisperse Ni powders
Choi JY, Lee YK, Yoon SM, Lee HC, Kim BK, Kim JM, Kim KM, Lee JH |
| 3024 - 3031 |
Particulate-reinforced precursor-derived Si-C-N ceramics: Optimization of pyrolysis atmosphere and schedules
Lee SH, Weinmann M, Aldinger F |
| 3032 - 3036 |
Compaction as a critical factor for success in the sintering of ultra-fine WC-Co powders
Jung J, Kang S |
| 3037 - 3042 |
Crystallization kinetics and phase development of PbO-BaO-SrO-Nb2O5-B2O3-SiO2-based glass-ceramics
Cheng CT, Lanagan M, Jones B, Lin JT, Pan MJ |
| 3043 - 3048 |
Processing-property relations in grain-oriented lead metaniobate ceramics fabricated by layered manufacturing
Hagh NM, Nonaka K, Allahverdi M, Safari A |
| 3049 - 3054 |
Sol-gel preparation of thick PZN-PZT film using a diol-based solution containing polyvinylpyrrolidone for piezoelectric applications
Choi JJ, Park GT, Lee SM, Kim HE |
| 3055 - 3062 |
Structure-property relationships of BaTi1-2yGayNbyO3 (0 <= y <= 0.35) ceramics
Feteira A, Sinclair DC, Reaney IM, Lanagan MT |
| 3063 - 3066 |
Dielectric and pyroelectric properties of < 111 >-oriented Fe-doped 0.62Pb(Mg1/3Nb2/3)O-3-0.38PbTiO(3) single crystals
Wan XM, Zhao XY, Luo HS, Chan HLW, Choy CL |
| 3067 - 3074 |
Local conductivity of nitrogen-graded zirconia
Lee JS, Fleig J, Maier J, Kim DY, Chung TJ |
| 3075 - 3080 |
Oxidation of polymer-derived SiAlCN ceramics
Wang YG, An LN, Fan Y, Zhang LG, Burton S, Gan ZH |
| 3081 - 3087 |
Synthesis and characterization of NiO-YSZ anode materials: Precipitation, calcination, and the effects on sintering
Grgicak CM, Green RG, Du WF, Giorgi JB |
| 3088 - 3095 |
Mechanical properties of thin pyrolitic carbon interphase SiC-Matrix composites reinforced with near-stoichiometric SiC fibers
Katoh Y, Nozawa T, Snead LL |
| 3096 - 3103 |
Cement formulations in the calcium phosphate H2O-H3PO4-H4P2O7 system
Grover LM, Gbureck U, Wright AJ, Barralet JE |
| 3104 - 3109 |
Investigation of anelastic creep recovery in SiC whisker-reinforced alumina composites
Quan GC, Conlon KT, Wilkinson DS |
| 3110 - 3115 |
Temperature dependence of diamondlike carbon film tribological characteristics
Xu GH, Liang H, Woodford JB, Johnson JA |
| 3116 - 3124 |
Measurement of the thermophysical properties of a thermoplastic ceramic paste across its solidification range using power-compensated differential scanning calorimeter
Barker DA, Wilson DI |
| 3125 - 3130 |
Stress corrosion cracking of single-crystal tetragonal ZrO2(Er2O3)
Ridruejo A, Pastor JY, LLorca J, Sayir A, Orera VM |
| 3131 - 3136 |
The anorthite-diopside system: Structural and devitrification study. Part II: Crystallinity analysis by the Rietveld-RIR method
Barbieri L, Bondioli F, Lancellotti I, Leonelli C, Montorsi M, Ferrari AM, Miselli P |
| 3137 - 3142 |
Visible light-sensitive InTaO4-based photocatalysts for organic decomposition
Irie H, Hashimoto K |
| 3143 - 3146 |
Formation and properties of chalcogenide glasses in the GeSe2-As2Se3-CdSe system
Zhao DH, Xia F, Chen GR, Zhang XH, Ma HL, Adam JL |
| 3147 - 3153 |
Phase diagram of the Bi4Ti3O12-BaTiO3-(Na1/2Bi1/2)TiO3 system
Sanson A, Whatmore RW |
| 3154 - 3161 |
Crystallographic orientation relationships between hexagonal and tetragonal barium titanate
Wu YC, Lu HY |
| 3162 - 3169 |
Molecular dynamics simulation of calcium diffusion in the calcium alumino-silicate intergranular films between different alumina grains
Zhang S, Garofalini SH |
| 3170 - 3176 |
Gibbs energy change of carbothermal nitridation reaction of gamma-AlON and its thermodynamic stability
Nakao W, Fukuyama H |
| 3177 - 3183 |
Migration of corundum crystal basal surfaces in a matrix of fine alumina grains and anorthite liquid
Back JH, Kim MJ, Yoon DY |
| 3184 - 3191 |
Atomic resolution imaging of Au nanocluster dispersed in TiO2, SrTiO3, and MgO
Wang CM, Shutthanandan V, Zhang Y, Thevuthasan S, Duscher G |
| 3192 - 3197 |
High-temperature phase equilibria of the magnesium-niobium-titanate system
Mangham RI, Petuskey WT |
| 3198 - 3204 |
Early stages of crystallization in canasite-based glass ceramics
Kanchanarat N, Miller CA, Hatton PV, James PF, Reaney IM |
| 3205 - 3206 |
Thermal expansion of SrY2O4
Fukuda K, Matsubara H |
| 3207 - 3210 |
Plasma etching of nano-structured precursor-derived ceramic composites
Lee SH, Aldinger F |
| 3211 - 3214 |
Electrical conduction properties of LaP3O9 glass and glass-ceramics
Amezawa K, Tomiga T, Yamamoto N, Hanada T, Tomii Y |
| 3215 - 3217 |
Stability of channeled Ni-YSZ cermets produced from self-assembled NiO-YSZ directionally solidified eutectics
Laguna-Bercero MA, Larrea A, Merino RI, Pena JI, Orera VM |
| 3218 - 3221 |
Contemporary golden-like lusters on ceramics: Morphological, chemical, and structural properties
Helary D, Darque-Ceretti E, Aucouturier M |
| 3222 - 3225 |
Processing and thermal shock resistance of a polymer-derived MoSi2/SiCO ceramic composite
Bergero L, Sglavo VM, Soraru GD |
| 3226 - 3228 |
Fabrication of transparent cerium-doped lutetium aluminum garnet (LuAG : Ce) ceramics by a solid-state reaction method
Li HL, Liu XJ, Huang LP |
| 3229 - 3231 |
Effects of annealing on dielectric loss and microstructure of aluminum nitride ceramics
Kume S, Yasuoka M, Omura N, Watari K |
| 3232 - 3234 |
Synthesis of anatase-type TiO2 nanocrystallites via a redox route
Li JG, Ishigaki T |
| 3235 - 3237 |
Abnormal grain growth during rapid annealing of sol-gel alumina thin film deposited on Ni-based superalloy
Su YF, Chen HB, Lee WY |
| 3238 - 3240 |
Rapid microwave-hydrothermal synthesis of anatase form of titanium dioxide
Baldassari S, Komarneni S, Mariani E, Villa C |
| 3241 - 3244 |
Synthesis of MgAl2O4 spinel powder by combination of sol-gel and precipitation processes
Ye GT, Oprea G, Troczynski T |
| 3245 - 3248 |
Tribological properties of Ti3SiC2
Sarkar D, Basu B, Cho SJ, Chu MC, Hwang SS, Park SW |
| 3249 - 3252 |
Kinetics on a second scale at temperatures up to 2300 K - The reduction of manganese oxide in a solar furnace
Frey T, Guesdon C, Sturzenegger M |
| 3253 - 3255 |
Fabrication and microstructure of C/SiC composites using a novel heaterless chemical vapor infiltration technique
Tang SF, Deng JY, Du HF, Liu WC, Yang K |
| 3256 - 3259 |
Mechanical behavior of a borosilicate glass under aqueous corrosion
Ji H, Rouxel T, Abdelouas A, Grambow B, Jollivet P |
| 3260 - 3263 |
Conversion of fly ash - An environmentally detrimental waste to zeolite beta (BEA) for commercial catalytic applications
Kasture MW, Bokade VV, Joshi PN |
| 3264 - 3266 |
Nanostructure of TiO2 nano-coated SiO2 particles
Fujimoto M, Ohno T, Suzuki H, Koyama H, Tanaka J |
| 3267 - 3269 |
Effect of grain boundary structure on diffusion-induced grain boundary migration in BaTiO3
Wang SM, Kang SJL |
| 3270 - 3274 |
Tribophysical properties of polycrystalline bulk Ti3AlC2
Zhai HX, Huang ZY, Ai MX, Yang Z, Zhang ZL, Li SB |
| 3275 - 3278 |
Effect of (La0.8Sr0.2)CrO3 coating on carbon deposition onto a stainless-steel (SUS430) substrate
Hwang HJ, Lee S, Lee EA, Moon JW, Lim Y |
| 3279 - 3282 |
Phase formation and magnetoresistance of double perovskite Sr2FeMoO6
Li C, Yuan CL, Xue JM, Wang J |
| 3283 - 3286 |
Uniformly porous Al2O3/LaPO4 and Al2O3/CePO4 composites with narrow pore-size distribution
Suzuki Y, Tsukatsune M, Yoshikawa S, Morgan PED |
