| 3287 - 3302 |
Preparation and properties of hydroceramic waste forms made with simulated Hanford low-activity waste
Bao Y, Grutzeck MW, Jantzen CM |
| 3303 - 3310 |
Anatase-type TiO2 and ZrO2-doped TiO2 directly formed from titanium(III) sulfate solution by thermal hydrolysis: Effect of the presence of ammonium peroxodisulfate on their formation and properties
Hirano M, Ota K, Ito T |
| 3311 - 3315 |
Processing of microcellular mullite
Kim YW, Kim HD, Park CB |
| 3316 - 3321 |
Mechanosynthesis of gadolinium iron garnet
Zanatta SC, Cotica LF, Paesano A, Medeiros SN, Cunha JBM, Hallouche B |
| 3322 - 3326 |
Boehmite nanoparticles by the two-reverse emulsion technique
Naskar MK, Chatterjee M |
| 3327 - 3331 |
Effects of preparation conditions on the structural and optical properties of spark plasma-sintered PLZT (8/65/35) ceramics
Wu YJ, Li J, Kimura R, Uekawa N, Kakegawa K |
| 3332 - 3337 |
A synergistic low-toxicity gelcasting system by using HEMA and PVP
Cai K, Huang Y, Yang JL |
| 3338 - 3345 |
Fabrication and characterization of ceramic foams based on silicon carbide matrix and hollow alumino-silicate spheres
Ozcivici E, Singh RP |
| 3346 - 3352 |
Sintering kinetics at constant rates of heating: Effect of Al2O3 on the initial sintering stage of fine zirconia powder
Matsui K, Ohmichi N, Ohgai M, Enomoto N, Hojo J |
| 3353 - 3360 |
Synthesis of HA-seeded TTCP (Ca-4(PO4)(2)O) powders at 1230 degrees C from Ca(CH3COO)(2) center dot H2O and NH4H2PO4
Jalota S, Tas AC, Bhaduri SB |
| 3361 - 3368 |
A study of screen printed yttria-stabilized zirconia layers for solid oxide fuel cells
Von Dollen P, Barnett S |
| 3369 - 3373 |
Densification and grain growth of Fe-doped and Fe/Y codoped alumina: Effect of Fe valency
Drahus MD, Chan HM, Rickman JM, Harmer MP |
| 3374 - 3379 |
The effect of zirconia reinforcing agents on the microstructure and mechanical properties of hydroxyapatite-based nanocomposites
Ahn ES, Gleason NJ, Ying JY |
| 3380 - 3387 |
Feedback-controlled firing of reaction-bonded aluminum oxide
Watson MJ, Chan HM, Harmer MP, Caram HS |
| 3388 - 3396 |
Chemical solution deposition of (Pb1-xCax)TiO3 thin films with x similar to 0.5 as new dielectrics for tunable components and dynamic random access memories
Calzada ML, Bretos I, Jimenez R, Ricote J, Mendiola J, Garcia-Lopez J, Respaldiza MA |
| 3397 - 3404 |
Synthesis and dielectric characterization of potassium niobate tantalate ceramics
Venkatesh J, Sherman V, Setter N |
| 3405 - 3411 |
Ultra-fine Ba2Ti9O20 powders synthesized by inverse microemulsion processing and their microwave dielectric properties
Chu LW, Hsiue GH, Lin IN |
| 3412 - 3418 |
Comparison of the magnetic, conduction, and magnetotransport behaviors of Ba2+- and Al3+-doped La0.67Ca0.33MnO3
Fang TT, Lu E, Ho HF |
| 3419 - 3422 |
Microwave dielectric properties and low-temperature cofiring of BaTe4O9 with aluminum metal electrode
Kwon DK, Lanagan MT, Shrout TR |
| 3423 - 3426 |
Fabrication and efficient infrared-to-visible upconversion in transparent glass ceramics of Er-Yb co-doped CaF2 nano-crystals
Kishi Y, Tanabe S, Tochino S, Pezzotti G |
| 3427 - 3432 |
Proton-conductive membranes doped with orthophosphoric acid based on inorganic-organic hybrid materials
Huang SJ, Lee HK, Lee YS, Kang WH |
| 3433 - 3439 |
Tailoring the microwave dielectric properties of Ca5Ta2TiO12 ceramics through glass addition
Bijumon PV, Sebastian MT |
| 3440 - 3443 |
Magnetic properties of a novel ceramic ferroelectric-ferromagnetic composite
Shen JH, Bai Y, Zhou J, Li LT |
| 3444 - 3448 |
Synthesis and characterization of thin ferroelectric PbZr0.52Ti0.48O3 fibrils
Ram S, Mandal TK |
| 3449 - 3454 |
Optical properties of hydrothermally synthesized hematite particulate pigments
Wang J, White WB, Adair JH |
| 3455 - 3457 |
Temperature dependence of the cation distribution in nickel aluminate spinel from thermodynamics and X-rays
Han YS, Li JB, Ning XS, Chi B |
| 3458 - 3468 |
Synthesis of rhodamine B-doped and monodispersed spherical particles of polyorganosiloxane using a W/O emulsion
Matsumoto T, Takayama Y, Onoda H, Kojima K, Wada N |
| 3469 - 3473 |
Micromechanical hardness of strontium tartrate trihydrate crystals
Arora SK, Patel V, Kothari A, Chudasama B |
| 3474 - 3477 |
Influence of carbon fiber additions on friction properties and running-in behavior of silicon nitride-based composites under water lubrication
Hyuga H, Hirao K, Kita H, Jones MI, Yamauchi Y |
| 3478 - 3482 |
Effect of heat treatments on the crack-healing and static fatigue behavior of silicon carbide sintered with Sc2O3 and AlN
Lee SK, Ando K, Kim YW |
| 3483 - 3488 |
Residual stresses and their effects on the durability of environmental barrier coatings for SiC ceramics
Lee KN, Eldridge JI, Robinson RC |
| 3489 - 3491 |
Thermal expansion of polycrystalline Ti3SiC2 in the 25 degrees-1400 degrees C temperature range
Manoun B, Saxena SK, Liermann HP, Barsoum MW |
| 3492 - 3500 |
The Wulff shape of alumina: IV. Ti4+-doped alumina
Kitayama M, Glaeser AM |
| 3501 - 3506 |
Effects of samarium oxide addition on the phase composition, microstructure, and electrical resistivity of aluminum nitride ceramics
Yoshikawa J, Katsuda Y, Yamada N, Ihara C, Masuda M, Sakai H |
| 3507 - 3508 |
Chemical interactions between cement and E-glass fibers with a CaO-BaO-SiO2-TiO2 coating
Wen L, Cheng JJ, Hu YJ |
| 3509 - 3512 |
The ZrB2 volatility diagram
Fahrenholtz WG |
| 3513 - 3514 |
Facile fabrication of porous titania microtube arrays by replication of human hair
Liu SX, He JH |
| 3515 - 3518 |
Effect of adding carbon nanotubes on microstructure, phase transformation, and mechanical property of BaTiO3 ceramics
Huang Q, Gao L, Sun J |
| 3519 - 3521 |
Synthesis of nanocrystalline cubic Tantalum(III) nitride powders by nitridation-thermal decomposition
Fu B, Gao L |
| 3522 - 3524 |
Synthesis of amorphous silica nanosheets and their photoluminescence
Nakano H, Ohtani O, Mitsuoka T, Akimoto Y, Nakamura H |
| 3525 - 3527 |
Dielectric characteristics of bi- and ti-substituted Pb(Mg1/3Nb2/3)O-3
Kim YS, Kim NK |
| 3528 - 3530 |
Crystal structure of Zr2Al3C4
Fukuda K, Mori S, Hashimoto S |
| 3531 - 3534 |
Improved sliding-wear resistance in in situ-toughened silicon carbide
Borrero-Lopez O, Ortiz AL, Guiberteau F, Padture NP |
| 3535 - 3537 |
Low-temperature synthesis of NiFe2O4 by a hydrothermal method
Zhou J, Ma JF, Sun C, Xie LJ, Zhao ZQ, Tian H, Wang YG, Tao JT, Zhu XY |
| 3538 - 3541 |
Sintering silicon nitride ceramics in air
Plucknett KP, Lin HT |
| 3542 - 3544 |
Neutron powder diffraction study of y-sialon with La2O3 or Nd2O3 addition
Salamon D, Pritula O, Sajgalik P, Rundlof H |
| 3545 - 3548 |
Osteoinduction by functionally graded apatites of bovine origin loaded with bone morphogenetic protein-2
Akazawa T, Itabashi K, Murata M, Sasaki T, Tazaki J, Arisue M, Kobayashi M, Kanno T |
| 3549 - 3552 |
Preparation and characterization of nano-crystalline LiNi0.5Mn1.5O4 cathode material by the soft combustion reaction method
Zhao ZQ, Ma JF, Tian H, Xie LJ, Zhou J, Wu PW, Wang YG, Tao JT, Zhu XY |
