165 - 169 |
Preparation and catalytic properties of Ag/CuO nano-composites via a new method Wang LS, Deng JC, Yang F, Chen T |
170 - 175 |
Growth and characterization studies of ferroelectric diglycine nitrate (DGN) single crystals Kanagadurai R, Sankar R, Sivanesan G, Srinivasan S, Rajasekaran R, Jayavel R |
176 - 178 |
Morphology variation in growth process of InN pillar crystal films on Si (100) substrate by halide chemical vapor de position under atmospheric pressure Sugiura H, Wakasugi S, Mizutani H, Nakamura T, Takahashi N |
179 - 183 |
Fabrication and characterization of OLED with Mg complex of 5-chloro-8-hydroxyquinoline as emission layer Sharma A, Singh D, Makrandi JK, Kamalasanan MN, Shrivastva R, Singh I |
184 - 187 |
Synthesis of CuO nanocrystalline and their application as electrode materials for capacitors Zhang H, Zhang M |
188 - 191 |
A facile method to prepare MoS2 with nanoflower-like morphology Wei RH, Yang HB, Du K, Fu WY, Tian YM, Yu QJ, Liu S, Li MH, Zou GI |
192 - 195 |
Growth and characterization Of L-histidine nitrate single crystal, a promising semiorganic NLO material Zhang Y, Li H, Xi B, Che YX, Zheng JM |
196 - 200 |
Effect of Ni(OH)(2) coating on the electromagnetic properties of hexagonal barium ferrite Xu P, Han XJ, Wang XH, Wang C, Zhao HT, Zhang WJ |
201 - 207 |
Spin-glass-like ordering in epsilon-Fe3-xNixN (0.1 <= x <= 0.8) nanoparticles Gajbhiye NS, Bhattacharyya S |
208 - 213 |
Modification of friction and wear properties of PET membrane fabrics by MEVVA ion implantation Oktem T, Tarakcoglu I, Ozdogan E, Oztarhan A, Namligoz ES, Karaaslan A, Tek Z |
214 - 219 |
Synthesis and characterization of hyper-branched polyimides from 2,4,6-triaminopyrimidine and dianhydrides system Park SJ, Li K, Jin FL |
220 - 226 |
Above room temperature magnetocaloric properties of La0.7Ba0.3-zNazMnO3 compounds Das S, Dey TK |
227 - 231 |
Microwave-induced polyol-process synthesis of (MFe2O4)-Fe-II (M = Mn, Co) nanoparticles and magnetic property Wang WW |
232 - 236 |
High surface area SnO2 nanoparticles: Synthesis and gas sensing properties Xi LJ, Qian D, Tang XC, Chen CJ |
237 - 246 |
Synthesis and characterization of iron(III) oxides as supports for Au(0)-based catalysts Nodari L, Centomo P, Salviulo G, Russo U |
247 - 250 |
Investigation of the electrocatalytic activity of nickel for ammonia oxidation Yao K, Cheng YF |
251 - 256 |
Effect of La/Mg on the structure and electrochemical performance of La-Mg-Ni system hydrogen storage electrode alloy Dong XP, Lue FX, Zhang YH, Yang LY, Wang XL |
257 - 262 |
Characterization of Mn2+ doped tetramethylammoniumtetrachlorozincate single crystal using EPR and optical absorption Kripal R, Maurya M |
263 - 268 |
Kinetic model for the isothermal activation of bentonite by sulfuric acid Babaki H, Salem A, Jafarizad A |
269 - 273 |
Hydrothermal synthesis of CoFe2O4 nanoplatelets and nanoparticles Liu Q, Sun JH, Long HR, Sun XQ, Zhong XJ, Xu Z |
274 - 277 |
Effects of pressure on pulsed laser deposition of HgCdTe films Liu M, Man B, Lin XC, Li X |
278 - 282 |
Inhibition of C-steel corrosion in acidic solution using the aqueous extract of zallouh root Ei-Etre AY |
283 - 289 |
Quinol-2-thione compounds as corrosion inhibitors for mild steel in acid solution Prabhu RA, Venkatesha TV, Shanbhag AV, Praveen BM, Kulkani GM, Kalkhambkar RG |
290 - 295 |
Composite cathode La0.15Bi0.85O1.5-Ag for intermediate-temperature solid oxide fuel cells Gao Z, Mao ZQ, Huang HB, Gao RF, Wang C, Liu ZX |
296 - 305 |
Optimization of mechanical and chemical properties of sulphuric anodized aluminium using statistical experimental methods Bensalah W, Elleuch K, Feki M, Wery M, Gigahdet MP, Ayedi HF |
306 - 311 |
Study of dielectric property on BaTiO3/BADCy composite Chao F, Liang GZ, Kong WF, Zhang X |
312 - 318 |
Structural and morphological characterization of Pb1-xBaxTiO3 thin films prepared by chemical route: An investigation of phase transition Pontes FM, Galhiane MS, Santos LS, Rissato RS, Pontes DSL, Longo E, Leite ER, Pizani PS, Chiquito AJ, Machado MAC |
319 - 324 |
Preparation, characterization and spectral studies of Cr1-xEuxBO3 (x = 0, 0.01 and 0.05) Anantharamulu N, Kumar BV, Devi VR, Vithal M |
325 - 330 |
Fabrication of micro electromagnetic actuator of high energy density Zhang T, Zhang P, Li HW, Wu YH, Liu YS |
331 - 336 |
Polyvinyl alcohol-polyethylenglycol blends. with tungstophosphoric acid addition: Synthesis and characterization Monopoli VD, Pizzio LR, Blanco MN |
337 - 344 |
Synthesis of lead oxide nanoparticles by Sonochemical method and its application as cathode and anode of lead-acid batteries Karami H, Karimi MA, Haghdar S, Sadeghi A, Mir-Ghaserm R, Mahdi-Khani S |
345 - 352 |
Electrochemical study of cobalt nucleation mechanisms on different metallic substrates Sahari A, Azizi A, Fenineche N, Schmerber G, Dinia A |
353 - 358 |
Influence of the amount of KBF4 on the morphology of Mg2Si in Mg-5Si alloys Wang HY, Wang W, Zha M, Zheng N, Gu ZH, Li D, Jiang QC |
359 - 363 |
Deuteration effects on structural, thermal, linear and nonlinear properties of L-threonine single crystals Kumar GR, Raj SG, Saxena A, Karnal AK, Raghavalu T, Mohan R |
364 - 368 |
Fabrication, thermal stability and mechanical properties of novel composite hardmetals obtained by solid-state reaction and hot-pressing sintering Qiao ZH, Ma XF, Zhao W, Tang HG |
369 - 374 |
Synthesis of chain-like Ru nanoparticle arrays and its catalytic activity for hydrogenation of phenol in aqueous media Lu F, Liu J, Xu J |
375 - 381 |
Studies on preparing and corrosion inhibition behaviour of quaternized polyethyleneimine for low carbon steel in sulfuric acid Gao BJ, Zhang X, Sheng YL |
382 - 390 |
Effects of microwave-assisted digestion on decomposition behavior of polymethyl methacrylate (PMMA) Tsai TL, Lin CC, Guo GL, Chu TC |
391 - 396 |
A study on the kinetics of Co-Ni/Cu multilayer electrodeposition in sulfate solution Dolati A, Mahshid SS |
397 - 402 |
Preparation of hyperfunctional carbon black by grafting of hyperbranched polyester onto the surface Taniguchi Y, Ogawa M, Gang W, Saitoh H, Fujiki K, Yamauchi T, Tsubokawa N |
403 - 407 |
Electrochemical instability of indium tin oxide (ITO) glass in acidic pH range during cathodic polarization Senthilkumar M, Mathiyarasu J, Joseph J, Phani KLN, Yegnaraman V |
408 - 412 |
Response of dielectric behaviour on ferroelectric rich (y) Ni0.8Zn0.2Fe2O4+(1-y) PZT ME composites Chougule SS, Chougule BK |
413 - 416 |
Effect of B-site substitution of complex ions on dielectric and piezoelectric properties in (Bi1/2Na1/2)TiO3 piezoelectric ceramics Zhou CR, Liu XY |
417 - 420 |
Effect of Mg doping on ferroelectric PST thin films for high tunable devices Li XT, Huo WL, Mak CL, Sui S, Weng WJ, Han GR, Shen G, Du PY |
421 - 424 |
Microwave-assisted green synthesis of silver nanoparticles by carboxymethyl cellulose sodium and silver nitrate Chen J, Wang J, Zhang X, Jin YL |
425 - 430 |
Crystal structures and optical properties of novel fluorene-bithiophene and trithiophene-based diols Liu H, Tao XT, He T, Ju HD, Yu WT, Jiang MH |
431 - 434 |
Thermoelectric properties of InzCo4Sb12-yTey skutterudites Jung JY, Ur SC, Kim IH |
435 - 439 |
Solid state and catalytic CO oxidation studies on Zn1-xNixMnO3 system Shetkar RG, Salker AV |
440 - 444 |
Fabrication of BN nanosheets-coated SrAl2O4 : Eu2+ as a new water-resistant phosphor by a one-pot method Lin J, Huang Y, Zhang J, Shi FJ, Wei SY, Gao JM, Huang ZX, Ding XX, Tang CC |
445 - 448 |
High-tunability and low-leakage current of the polycrystalline compositionally graded (Ba,Sr)TiO3 thin films derived by a sol-gel process Wang J, Zhang TJ, Xiang JH, Zhang BS |
449 - 455 |
Preparation and intercalation reactions of nano-structural materials, Zn-Al-Ti LDH Saber O, Tagaya H |