191 - 194 |
Hydrothermal preparation of selenium nanorods Chen YT, Zhang W, Fan YQ, Xu XQ, Zhang ZX |
195 - 197 |
Formation and structure of single crystalline magnesium borate (Mg3B2O6) nanobelts Zhang J, Li ZQ, Zhang B |
198 - 202 |
Microwave dielectric properties of BiNb1-xMoxO4 ceramics Mao Y, Ding SH, Yao X, Zhang LY |
203 - 206 |
Synthesis and electrical characterization of CaBi2Nb2O9 thin films deposited on Pt/Ti/SiO2/Si substrates by polymeric precursor method Simoes AZ, Ramirez MA, Riccardi CS, Gonzalez AHM, Longo E, Varela JA |
207 - 211 |
Self-aligned magnetic dipole moments of Fe2O3 formed within sol-gel matrix Zhang XM, Guo HQ, Chi N, Wang SC, Yang NL, Akins DL |
212 - 216 |
The steady-state and time-resolved photophysical properties of a dimeric indium phthalocyanine complex Chen Y, Araki Y, Dini D, Liu Y, Ito O, Fujitsuka M |
217 - 224 |
Dispersion investigation of TiO2 nanoparticles coated by pulsed RF plasma polymer Wang Y, Zhang J, Shen XY, Shi CN, Wu JJ, Sun L |
225 - 230 |
Effect of DY2O3 and La2O3 on the microstructure and electrical properties Of WO3 ceramics Yang XS, Wang Y, Zhao Y |
231 - 235 |
Hydrothermal synthesis of rutile TiO2 nanoparticles using hydroxyl and carboxyl group-containing organics as modifiers Jiang BP, Yin HB, Jiang TS, Jiang YH, Feng H, Chen KM, Zhou WP, Wada YJ |
236 - 240 |
Synthesis of dispersive CaCO3 in the presence of MgO2 Xiang L, Wen Y, Wang Q, Jin Y |
241 - 247 |
Preparation of polyaniline-TiO2 composite film with in situ polymerization approach and its gas-sensitivity at room temperature Ma XF, Wang M, Li G, Chen HZ, Bai R |
248 - 255 |
An investigation on changes in chemical properties of pure ethylene-propylene-diene rubber in aqueous acidic environments Mitra S, Ghanbari-Siahkali A, Kingshott P, Hvilsted S, Almdal K |
256 - 260 |
Optimization of carbon nanotube powder growth using low pressure floating catalytic chemical vapor deposition Chen Y, Sun Z, Li YN, Tay BK |
261 - 266 |
Quantitative analysis of ultrasonic attenuation in TiO2-doped CaO-Al2O3-B2O3 glasses El-Moneim AA |
267 - 272 |
Preparation and characterization of nanoplatelets of nickel hydroxide and nickel oxide Zhou GT, Yao QZ, Wang XC, Yu JC |
273 - 278 |
Creep and sintering resistance of a Ce added anode electrode for molten carbonate fuel cell Wee JH |
279 - 284 |
Chemical deposition of ZnO films from ammonium zincate bath Mitra P, Khan J |
285 - 290 |
Investigation of microstructures and fatigue properties of friction stir welded Al-Mg alloy Zhou CZ, Yang XQ, Luan GH |
291 - 297 |
Kinetics and thermodynamics of aluminium dissolution in 1.0 M sulphuric acid containing chloride ions Abdel-Gaber AM, Abd-El-Nabey BA, Sidahmed IM, El-Zayady AM, Saadawy M |
298 - 303 |
Controlled synthesis and characterization of covellite (CuS) nanoflakes Zhang HT, Wu G, Chen XH |
304 - 308 |
Adjusting the inner-structure of polypyrrole nanoparticles through microemulsion polymerization Liu Y, Chu Y, Yang LK |
309 - 315 |
Application of epoxy-based photosensitive polymers for optical MEMS and subsequent reliability evaluation Park J, Shin DS |
316 - 323 |
The effect of temperature on the corrosion of mild steel in acidic media in the presence of some sulphur-containing organic compounds Dehri I, Ozcan M |
324 - 329 |
Synthesis and properties of glass-forming condensed aromatic amines with reactive functional groups Matoliukstyte A, Grazulevicius J, Reina JA, Jankauskas V, Montrimas E |
330 - 336 |
Preparation of CaMgSi2O6 : Eu blue phosphor particles by spray pyrolysis and its VUV characteristics Jung KY, Han KH, Kang YC, Jung HK |
337 - 343 |
Effect of copper ions implantation on corrosion behavior of zircaloy-2 in 1 M H2SO4 Peng DQ, Bai XD, Chen BS |
344 - 346 |
A co-precipitation technique for the preparation of ferroelectric BaBi2Ta2O9 Dhage SR, Pasricha R, Murugan AV, Ravi V |
347 - 352 |
The photochromic process of polyoxometalate-based nanocomposite thin film by in situ AFM and spectroscopy Feng W, Ding YS, Liu Y, Lu R |
353 - 357 |
Microstructure and electrical properties of antimony-doped tin oxide thin film deposited by sol-gel process Zhang DL, Deng ZB, Zhang JB, Chen LY |
358 - 362 |
Electric properties and acetone-sensing characteristics of La1-xPbxFeO3 perovskite system Zhang L, Qin HW, Song P, Hu JF, Jiang MH |
363 - 367 |
Mechanochemical reforming of nickel pyrophosphate Onoda H, Ohta T, Kojima K |
368 - 372 |
The study of crosslinked shape memory polyurethanes Yang ZH, Hu JL, Liu YQ, Yeung LY |
373 - 376 |
Novel synthesis of LiFePO4 by aqueous precipitation and carbothermal reduction Zhu BQ, Li XH, Wang ZX, Guo HJ |
377 - 381 |
Enhanced photocatalytic activity of microwave treated TiO2 pillared montmorillonite Sun SM, Jiang YS, Yu LX, Li FF, Yang ZW, Hou TY, Hu DQ, Xia MS |
382 - 388 |
On the development of proton conducting P2O5-ZrO2-SiO2 glasses for fuel cell electrolytes Uma T, Nogami M |
389 - 394 |
As-quenched microstructures of Cu3-XMnxAl alloys Yang SY, Liu TF |
395 - 400 |
Studies on triazole derivatives as inhibitors for the corrosion of muntz metal in acidic and neutral solutions Berchmans LJ, Sivan V, Iyer SVK |
401 - 405 |
Structural and optical characterisation of thermally evaporated tungsten trioxide (WO3) thin films Hutchins MG, Abu-Alkhair O, El-Nahass MM, El-Hady KA |
406 - 409 |
Microwave dielectric properties of doped Zn3Nb2O8 ceramics sintered below 950 degrees C and their compatibility with silver electrode Wu MC, Huang KT, Su WF |
410 - 414 |
Raman mapping of local phases and local stress fields in silicon-silicon carbide composites Amer MS, Durgam L, El-Ashry MM |
415 - 418 |
Microstructural evolution of bulk polycrystalline La0.7-xLuxSr0.3MnO3 (x=0.2, 0.45, 0.6) compounds Sun BZ, He LL, Luo F, Yan CH |
419 - 421 |
Biomolecule-assisted hydrothermal synthesis and one-dimensional self-assembly of copper sulfide nanocrystallites Chen X, Zhang X, Wang Z, Wan J, Qian Y |
422 - 424 |
Solvothermal synthesis of CdSe nanorods via DEA solution Wang HN, Guo ZY, Du FL |
425 - 429 |
Synthesis of ethylenediaminetetraacetic acid disodium salt nanoparticles in the lamellar liquid crystal and application to lubrication Ding YH, Xu B, Guo R |
430 - 433 |
Effect of nucleation temperatures and time on crystallization behavior and properties of Li2O-Al2O3-SiO2 glasses Hu AM, Liang KM, Li M, Mao DL |
434 - 441 |
Structural, optical and photocatalytic properties of new solid photocatalysts, BixIn1-xTaO4 (0 < x < 1) Luan JF, Zou Z, Lu M, Chen Y |
442 - 446 |
Pseudocapacitance characterization of hydrous ruthenium oxide prepared via cyclic voltammetric deposition Wen JG, Zhou ZT |
447 - 449 |
A high (001)-oriented [CoPt/C](n)/Ag film for perpendicular recording media Xu XH, Jin T, Li XL, Wang F, Jiang FX, Yang ZG, Wu HS |
450 - 455 |
Size dependence on the ferroelectric transition of nanosized BaTiO3 particles Yan T, Shen ZG, Zhang WW, Chen JF |
456 - 458 |
Synthesis of hollow carbon microspheres in ionic liquids and their electrochemical capacitance characteristics Zhang FB, Li HL |
459 - 462 |
Effect of calcination on the magnetic permeability of (Ni0.21Zn0.58Cu0.23)Fe1.95O4 ferrite prepared using the sol-gel self-propagated technique Hu J, Yan M, Zhang WY |
463 - 469 |
Stabilization of gold nanoparticles by thiol functionalized poly(epsilon-Caprolactone) for the labeling of PCL biocarrier Aryal S, Bahadur KCR, Bhattarai N, Lee BM, Kim HY |
470 - 476 |
Dielectric behavior and ac electrical conductivity of nanocrystalline nickel aluminate Kurien S, Mathew J, Sebastian S, Potty SN, George KC |
477 - 480 |
Effects of coating process on the characteristics of Ag-SnO2 contact materials Liu XM, Wu SL, Chu PK, Chung CY, Zheng J, Li SL |
481 - 485 |
Preparation of lanthanum doped Bi4Ti3O12 ceramics by the polymeric precursor method Simoes AZ, Quinelato C, Ries A, Stojanovic BD, Longo E, Varela JA |
486 - 493 |
Crystal structure and thermal expansion behavior of Ca2M9WO6 Patwe SJ, Achary SN, Mathews MD, Tyagi AK |
494 - 499 |
Physicochemical investigation of surfactant-coated gold nanoparticles synthesized in the confined space of dry reversed micelles Calandra P, Giordano C, Longo A, Liveri VT |
500 - 503 |
Synthesis and field emission property of SiCN cone arrays Cheng WJ, Lin FT, Shi WZ, Ma XM, Shen DZ, Zhang Y |
504 - 508 |
Synthesis and characterization of new mesoporous material with conducting polypyrrole confined in mesoporous silica Cheng QL, Pavlinek V, Li CZ, Lengalova A, He Y, Saha P |
509 - 513 |
Luminescence of long-lasting CaAl2O4 : Eu2+,Nd3+ phosphor by co-precipitation method Chang CK, Xu J, Jiang L, Mao DL, Ying WJ |
514 - 518 |
Effect of surface modification on the electrochemical performances of LaNi5 hydrogen storage alloy in Ni/MH batteries Deng C, Shi PF, Zhang S |
519 - 522 |
Solution phase synthesis of CuO nanorods Liu Q, Liang YY, Liu HJ, Hong JM, Xu Z |
523 - 527 |
Large-scale synthesis of flower-like ZnO structures by a surfactant-free and low-temperature process Liu JP, Huang XT, Li YY, Duan JX, Ai HH |
528 - 531 |
Combustion synthesis and luminescent properties of MIn2O4 : xTb (M = Ca and Sr) phosphors Khatkar SP, Taxak VB, Han SD, Park JY, Kumar D |
532 - 538 |
Influence of Y3+ doping on structure and electrochemical property of the LiMn2O4 Xu CQ, Tian YW, Zhai YC, Liu LY |