1 - 6 |
Investigation on the paraffin prevention performance of lanthanum-modified zinc powder Wang ZW, Zhu LQ, Liu HC, Li WP |
7 - 12 |
Photoreactive mesoporous carbon/Bi2WO6 composites: Synthesis and reactivity Chen SH, Yin Z, Luo SL, Li XJ, Yang LX, Deng F |
13 - 20 |
The numerical analysis of the spherical carbon adsorbents obtained from ion-exchange resins in one-step steam pyrolysis Kwiatkowski M, Wisniewski M, Rychlicki G |
21 - 28 |
Facile thermal explosion synthesis and optical properties of Al-doped flatted 3C-SiC microcrystals with 4H-SiC quantum interlayers Li Y, Li JT, Chen CX, Yang ZC, Yang Y, Lin ZM |
29 - 33 |
Effect of heterogeneous interface on the microwave dielectric properties of Ca(Mg1/3Nb2/3)O-3/CaTiO3 thin films Zhou J, Li RR, Li R, Chen W |
34 - 38 |
RHEED study of the growth of cerium oxide on Cu(111) Masek K, Beran J, Matolin V |
39 - 43 |
Chemical synthesis of spinel cobalt ferrite (CoFe2O4) nano-flakes for supercapacitor application Kumbhar VS, Jagadale AD, Shinde NM, Lokhande CD |
44 - 48 |
Arrays of nanostructured antidot in Ni80Fe20 magnetic thin films by photolithography of polystyrene nanospheres Tibertoa P, Boarino L, Celegato F, Barrera G, De Leo N, Coisson M, Vinai F, Allia P |
49 - 54 |
Raman and NMR studies of aged LiFePO4 cathode Nagpure SC, Bhushan B, Babu SS |
55 - 58 |
Sorbitol as an efficient reducing agent for laser-induced copper deposition Kochemirovsky VA, Logunov LS, Safonov SV, Tumkin II, Tver'yanovich YS, Menchikov LG |
59 - 65 |
c-axis orientation and piezoelectric coefficients of AlN thin films sputter-deposited on titanium bottom electrodes Ababneh A, Alsumady M, Seidel H, Manzaneque T, Hernando-Garcia J, Sanchez-Rojas JL, Bittner A, Schmid U |
66 - 71 |
Research on the effects of machining-induced subsurface damages on mono-crystalline silicon via molecular dynamics simulation Zhao HW, Shi CL, Zhang P, Zhang L, Huang H, Yan JW |
72 - 78 |
Effect of n-HA with different surface-modified on the properties of n-HA/PLGA composite Jiang LY, Xiong CD, Chen DL, Jiang LX, Pang XB |
79 - 82 |
Synthesis and field emission of beta-SiC nanowires on silicon nanoporous pillar array Wang HY, Li ZJ, Kang LP, Li XJ |
83 - 92 |
Mechanism analysis of improved DLC films friction behaviors with liquid sulfidation treatment Zeng QF, Yu F, Dong GN, Mao JH |
93 - 98 |
Surface properties of bionic micro-pillar arrays with various shapes of tips Wang DP, Zhao AW, Jiang R, Li D, Zhang MF, Gan ZB, Tao WY, Guo HY, Mei T |
99 - 104 |
Controllable electrochemical synthesis of ZnO nanorod arrays on flexible ITO/PET substrate and their structural and optical properties Ko YH, Kim MS, Yu JS |
105 - 109 |
Inductively coupled plasma etching to fabricate sensing window for polymer waveguide biosensor application Wang XB, Meng J, Sun XQ, Yang TF, Sun J, Chen CM, Zheng CT, Zhang DM |
110 - 117 |
Preparation of superhydrophobic and UV blocking cotton fabric via sol-gel method and self-assembly Pan CY, Shen L, Shang SM, Xing YJ |
118 - 123 |
Enhanced photocatalytic H-2-production activity of CdxZn1-xS nanocrystals by surface loading MS (M = Ni, Co, Cu) species Wang J, Li B, Chen JZ, Li N, Zheng JF, Zhao JH, Zhu ZP |
124 - 134 |
A statistical approach for the characterization of self-assembled hexagonal lattices Pourfard M, Faez K |
135 - 141 |
Changes in ionization potentials of MgO and CaO films upon heating in air and vacuum investigated by metastable de-excitation spectroscopy Yoshino K, Morita Y, Nagatomi T, Terauchi M, Tsujita T, Doi Y, Nakayama T, Yamauchi Y, Nishitani M, Kitagawa M, Yamauchi Y, Takai Y |
142 - 146 |
Preparation and characterization of gradient wettability surface depending on controlling Cu(OH)(2) nanoribbon arrays growth on copper substrate Huang ZH, Zhang JR, Cheng J, Xu SP, Pi PH, Cai ZQ, Wen XF, Yang ZR |
147 - 152 |
Enhanced tribology durability of a self-assembled monolayer of alkylphosphonic acid on a textured copper substrate Wan Y, Wang YH, Zhang Q, Wang ZQ, Xu Z, Liu CS, Zhang JY |
153 - 158 |
The effect of lizardite surface characteristics on pyrite flotation Feng B, Feng QM, Lu YP |
159 - 165 |
Preparation of nanosensors based on organic functionalized MWCNT for H2S detection Mohammadzadeh F, Jahanshahi M, Rashidi AM |
166 - 171 |
Atomic arrangement and magnetism of iron silicide on Fe(100) surface Suzuki TT, Hishita S |
172 - 177 |
Physical properties and surface/interface analysis of nanocrystalline WO3 films grown under variable oxygen gas flow rates Vemuri RS, Carbjal-Franco G, Ferrer DA, Engelhard MH, Ramana CV |
178 - 185 |
High-speed epitaxial growth of BaTi2O5 thick films and their in-plane orientations Guo DY, Ito A, Tu R, Goto T |
186 - 194 |
On the shot peening surface coverage and its assessment by means of finite element simulation: A critical review and some original developments Bagherifard S, Ghelichi R, Guagliano M |
195 - 200 |
Density functional study the interaction of oxygen molecule with defect sites of graphene Qi XJ, Guo X, Zheng CG |
201 - 207 |
Preparation and characterization of magnetic gene vectors for targeting gene delivery Zheng SW, Liu G, Hong RY, Li HZ, Li YG, Wei DG |
208 - 212 |
Anisotropic magnetization of epitaxial Ni nanogroove-arrays prepared by reduction of self-organized oxides Matsuda A, Yamauchi R, Tan G, Nakai H, Koyama K, Sunakawa K, Kaneko S, Yoshimoto M |
213 - 218 |
Annealing effects on the microstructure and magnetic domain structures of duplex stainless steel studied by in situ technique Guo LQ, Zhao XM, Li M, Zhang WJ, Bai Y, Qiao LJ |
219 - 224 |
Synthesis and characterization of platinum nanoparticles on carbon nanosheets with enhanced electrocatalytic activity toward methanol oxidation Wang ZP, Shoji M, Ogata H |
225 - 230 |
Local elasticity and adhesion of nanostructures on Drosophila melanogaster wing membrane studied using atomic force microscopy Wagner R, Pittendrigh BR, Raman A |
231 - 237 |
Pulse electrodeposition and characterization of nano Ni-W alloy deposits Kumar KA, Kalaignan GP, Muralidharan VS |
238 - 244 |
Effect of ammonium-salt solutions on the surface properties of carbon fibers in electrochemical anodic oxidation Qian X, Wang XF, Ouyang Q, Chen YS, Yan Q |
245 - 251 |
A mechanochemical approach to get stunningly uniform particles of magnesium-aluminum-layered double hydroxides Zhang XQ, Qi FL, Li SP, Wei SH, Zhou JH |
252 - 255 |
On the formation of surface gallium hydride species in supported gallium catalysts Serykh AI |
256 - 260 |
Effects of porous nano-structure on the metal-insulator transition in VO2 films Xu YJ, Huang WX, Shi QW, Zhang Y, Zhang YB, Song LW, Zhang YX |
261 - 269 |
Surface modification of poly(ethylene terephthalate) fabric via photo-chemical reaction of dimethylaminopropyl methacrylamide Mohamed NH, Bahners T, Wego A, Gutmann JS, Ulbricht M |
270 - 275 |
Characterization and hydrogen gas sensing properties of TiO2 thin films prepared by sol-gel method Haidry AA, Puskelova J, Plecenik T, Durina P, Gregus J, Truchly M, Roch T, Zahoran M, Vargova M, Kus P, Plecenik A, Plesch G |
276 - 282 |
Briefly brominated Ag thin films: XRD, FESEM, and optical studies of surface modification Rajesh D, Sunandana CS |
283 - 287 |
Influence of mechanical and chemical surface treatments on the formation of bone-like structure in cpTi for endosseous dental implants Parsikia F, Amini P, Asgari S |
288 - 293 |
Effect of surface modification on carbon fiber and its reinforced phenolic matrix composite Yuan H, Wang CG, Zhang S, Lin X |
294 - 300 |
Deformation behavior of the oxide film on the surface of cold sprayed powder particle Yin S, Wang XF, Li WY, Liao HL, Jie HE |
301 - 305 |
Enhanced spectral emissivity of CeO2 coating with cauliflower-like microstructure Huang JP, Li YB, He XD, Song GP, Fan CL, Sun Y, Fei WD, Du SY |
306 - 310 |
Hydrothermal synthesis and characterization of single crystalline Cu-doped alpha-FeOOH nanowires Shen NM, Xiang XM, She XC, Yang Y, Li YW |
311 - 319 |
Titanium alloy nanosecond vs. femtosecond laser marking Rusu S, Buzaianu A, Ionel L, Ursescu D, Galusca DG |
320 - 323 |
Electronic resonance and photoemission study of nitrogen doped TiO2 rutile (110) single crystals Takahashi I |
324 - 330 |
Fabrication of anodic aluminum oxide with incorporated chromate ions Stepniowski WJ, Norek M, Michalska-Domanska M, Bombalska A, Nowak-Stepniowska A, Kwasny M, Bojar Z |
331 - 337 |
Tunable ion-swelling for nanopatterning of macroscopic surfaces: The role of proximity effects Nagy N, Zolnai Z, Fulop E, Deak A, Barsony I |
338 - 342 |
Measuring the adhesion of alumina coatings onto Fecralloy supports using a mechanical testing system Adegbite SA |
343 - 348 |
Reactive wetting of AgCuTi filler metal on the TiAl-based alloy substrate Li YL, Liu W, Sekulic DP, He P |
349 - 355 |
Environmental remediation and superhydrophilicity of ultrafine antibacterial tungsten oxide-based nanofibers under visible light source Srisitthiratkul C, Yaipimai W, Intasanta V |
356 - 361 |
Phosphoric chemical conversion coating with excellent wax-repellent performance Guo YZ, Li WP, Zhu LQ, Wang ZW, Liu HC |
362 - 366 |
High-compactness coating grown by plasma electrolytic oxidation on AZ31 magnesium alloy in the solution of silicate-borax Shen MJ, Wang XJ, Zhang MF |
367 - 370 |
FT-IR spectroscopic and thermodynamic study on the adsorption of carbon dioxide and dinitrogen in the alkaline zeolite K-L Arean CO, Bibiloni GF, Delgado MR |
371 - 375 |
The chemical characterization and reflectivity of the Al(1.0%wtSi)/Zr periodic multilayer Zhong Q, Zhang Z, Zhu JT, Wang ZS, Jonnard P, Le Guen K, Andre JM |
376 - 384 |
Adsorption and release of amino acids mixture onto apatitic calcium phosphates analogous to bone mineral El Rhilassi A, Mourabet M, El Boujaady H, Bennani-Ziatni M, El Hamri R, Taitai A |
385 - 392 |
Angle resolved XPS of monomolecular layer of 5-chlorobenzotriazole on oxidized metallic surface Kazansky IP, Selyaninov IA, Kuznetsov YI |
393 - 398 |
The effects of ZnO layer and annealing temperature on the structure, optical and film-substrate cohesion properties of SiGe thin films prepared by radio frequency magnetron sputtering Liu JS, Li ZQ, Zhu KJ, He MX, Cong MQ, Zhang S, Peng J, Liu YN |
399 - 405 |
Comparative study of the ZnO and Zn1-xCdxO nanorod emitters hydrothermally synthesized and electrodeposited on p-GaN Lupan O, Pauporte T, Chow L, Chai G, Viana B, Ursaki VV, Monaico E, Tiginyanu IM |
406 - 415 |
Ultra-fast photo-patterning of hydroxamic acid layers adsorbed on TiAlN: The challenge of modeling thermally induced desorption Hemgesberg M, Schutz S, Muller C, Schlorholz M, Latzel H, Sun Y, Ziegler C, Thiel WR |
416 - 423 |
Characterization of a poly(ether urethane)-based controlled release membrane system for delivery of ketoprofen Macocinschi D, Filip D, Vlad S, Oprea AM, Gafitanu CA |
424 - 432 |
Hydrophilic property of 316L stainless steel after treatment by atmospheric pressure corona streamer plasma using surface-sensitive analyses Al-Hamarneh I, Pedrow P, Eskhan A, Abu-Lail N |
433 - 440 |
Uranium (VI) sorption by multiwalled carbon nanotubes from aqueous solution Fasfous II, Dawoud JN |
441 - 447 |
Decoration of BiOI quantum size nanoparticles with reduced graphene oxide in enhanced visible-light-driven photocatalytic studies Liu Z, Xu WC, Fang JZ, Xu XX, Wu SX, Zhu XM, Chen ZH |
448 - 453 |
Effects of negative substrate bias voltage on the structure and properties of aluminum oxide films prepared by DC reactive magnetron sputtering Tang XF, Luo F, Ou F, Zhou WC, Zhu DM, Huang ZB |
454 - 459 |
Effect of Ar bubbling during plasma electrolytic oxidation of AZ31B magnesium alloy in silicate electrolyte Lee J, Kim Y, Chung W |
460 - 464 |
Optoelectronic properties of graphene oxide thin film processed by cost-effective route Chowdhury FA, Morisaki T, Otsuki J, Alam MS |
465 - 476 |
Solvent-free covalent functionalization of multi-walled carbon nanotubes and nanodiamond with diamines: Looking for cross-linking effects Basiuk EV, Basiuk VA, Meza-Laguna V, Contreras-Torres FF, Martinez M, Rojas-Aguilar A, Salerno M, Zavala G, Falqui A, Brescia R |
477 - 485 |
Structural investigation of nC-Si/SiOx:H thin films from He diluted (SiH4+CO2) plasma at low temperature Samanta A, Das D |
486 - 493 |
Preparation and electromagnetic properties of Polyaniline(polypyrrole)-BaFe12O19/Ni0.8Zn0.2Fe2O4 ferrite nanocomposites Wang Y, Huang Y, Wang QF, He Q, Chen L |
494 - 500 |
Surface modification of polyimide (PI) film using water cathode atmospheric pressure glow discharge plasma Zheng PC, Liu KM, Wang JM, Dai Y, Yu B, Zhou XJ, Hao HG, Luo Y |
501 - 507 |
Ultrasound assisted deposition of silica coatings on titanium Kas R, Ertas FS, Birer O |
508 - 514 |
Microstructural characterization and mechanical properties of nitrided layers on aluminum substrate prepared by nitrogen arc Zheng XY, Ren ZA, Li X, Wang Y |
515 - 523 |
Dropwise condensation rate of water breath figures on polymer surfaces having similar surface free energies Ucar IO, Erbil HY |
524 - 537 |
Influence of Li-doping on structural characteristics and photocatalytic activity of ZnO nano-powder formed in a novel solution pyro-hydrolysis route Ganesh I, Sekhar PSC, Padmanabham G, Sundararajan G |
538 - 541 |
Stability of FDTS monolayer coating on aluminum injection molding tools Cech J, Taboryski R |
542 - 546 |
Self-supporting superhydrophobic thin polymer sheets that mimic the nature's petal effect Karaman M, Cabuk N, Ozyurt D, Koysuren O |
547 - 556 |
Mixed matrix membranes with HF acid etched ZSM-5 for ethanol/water separation: Preparation and pervaporation performance Zhan X, Lu J, Tan TT, Li JD |
557 - 561 |
Photocatalytic properties of hierarchical ZnO flowers synthesized by a sucrose-assisted hydrothermal method Lv W, Wei B, Xu LL, Zhao Y, Gao H, Liu J |
562 - 565 |
Optimal Zn/O ratio in vapor phase for the synthesis of high quality ZnO tetrapod nanocrystals via thermal evaporation of Zn in Air Lee GH |
566 - 573 |
One-pot hydrothermal synthesis of a mesoporous SiO2-graphene hybrid with tunable surface area and pore size Zhou X, Shi TJ |
574 - 581 |
Size characterisation of noble-metal nano-crystals formed in sapphire by ion irradiation and subsequent thermal annealing Mota-Santiago PE, Crespo-Sosa A, Jimenez-Hernandez JL, Silva-Pereyra HG, Reyes-Esqueda JA, Oliver A |
582 - 589 |
Reactive sputtering of ZnO:Al thin films from rotatable dual metallic targets Zhu H, Hupkes J, Bunte E, Huang SM |
590 - 595 |
Electron backscatter diffraction analysis of ZnO:Al thin films Garcia CB, Ariza E, Tavares CJ, Villechaise P |
596 - 599 |
Effect of deposition temperature on the properties of Al-doped ZnO films prepared by pulsed DC magnetron sputtering for transparent electrodes in thin-film solar cells Kim DS, Park JH, Shin BK, Moon KJ, Son M, Ham MH, Lee W, Myoung JM |
600 - 609 |
Enhancement of photovoltaic characteristics of nanocrystalline 2,3-naphthalocyanine thin film-based organic devices Farag AAM, Osiris WG, Ammar AH |
610 - 615 |
A new ion exchange behavior of protonated titanate nanotubes after deprotonation and the study on their morphology and optical properties Zhang HB, Cao LX, Liu W, Su G |
616 - 623 |
Friction and wear properties of Ti6Al4V/WC-Co in cold atmospheric plasma jet Xu WJ, Liu X, Song JL, Wu LB, Sun J |
624 - 630 |
Effect of reaction time on the synthesis and electrochemical properties of Mn3O4 nanoparticles by microwave assisted reflux method Sankar KV, Senthilkumar ST, Berchmans LJ, Sanjeeviraja C, Selvan RK |
631 - 636 |
Quantum chemical study of fluorinated AlN nano-cage Beheshtian J, Peyghan AA, Bagheri Z |
637 - 642 |
A first-principles study of the SCN- chemisorption on the surface of AlN, AlP, and BP nanotubes Soltani A, Taghartapeh MR, Mighani H, Pahlevani AA, Mashkoor R |
643 - 649 |
Hydrothermal fabrication of hydroxyapatite on the PEG-grafted surface of wood from Chinese Glossy Privet Wang N, Cai CJ, Cai DQ, Cheng JJ, Li SL, Wu ZY |
650 - 656 |
Adsorption study of anionic reactive dye from aqueous solution to Mg-Fe-CO3 layered double hydroxide (LDH) Ahmed IM, Gasser MS |
657 - 663 |
Photocatalytic performance of cylindrical reactor inserted with UV light-emitting-diodes for purification of low-level toxic volatile organic compounds Jo WK, Kang HJ |
664 - 670 |
Synergy effect of naphthenic acid corrosion and sulfur corrosion in crude oil distillation unit Huang BS, Yin WF, Sang DH, Jiang ZY |
671 - 673 |
Citric acid-assisted hydrothermal synthesis and luminescence of monodisperse NdPO4 nanorods Fan T, Lu JT |
674 - 684 |
Microstructure and elevated-temperature erosion-oxidation behaviour of aluminized 9Cr-1Mo Steel Huttunen-Saarivirta E, Honkanen M, Tsipas SA, Omar H, Tsipas D |
685 - 690 |
Effect of propane/silane ratio on the growth of 3C-SiC thin films on Si(100) substrates by APCVD Shi BA, Liu XC, Zhu MX, Yang JH, Shi EW |
691 - 697 |
Pulsed DC discharge for synthesis of conjugated plasma polymerized aniline thin film Barman T, Pal AR |
698 - 704 |
Preparation high photocatalytic activity of CdS/halloysite nanotubes (HNTs) nanocomposites with hydrothermal method Xing WN, Ni L, Huo PW, Lu ZY, Liu XL, Luo YY, Yan YS |
705 - 710 |
Multiscaled hierarchical nanostructures for enhancing the conversion efficiency of crystalline silicon solar cells Liu BF, Qiu SY, Hu RY, Liao YB, Chen N, Du GP |
711 - 718 |
Formation and characterization of wear-resistant PEO coatings formed on beta-titanium alloy at different electrolyte temperatures Habazaki H, Tsunekawa S, Tsuji E, Nakayama T |
719 - 725 |
Synthesis and characterization of superhydrophobic and superparamagnetic film based on maghemite-polystyrene composite nanoparticles Zhang LD, Liu WL, Xu WH, Yao JS, Zhao L, Wang XQ, Wu YZ |
726 - 730 |
Influence of multi-hit capability on quantitative measurement of NiPtSi thin film with laser-assisted atom probe tomography Kinno T, Akutsu H, Tomita M, Kawanaka S, Sonehara T, Hokazono A, Renaud L, Martin I, Benbalagh R, Salle B, Takeno S |
731 - 739 |
Paper surfaces for metal nanoparticle inkjet printing Ohlund T, Ortegren J, Forsberg S, Nilsson HE |
740 - 746 |
Effect of UV laser irradiation on the hardness and structural parameters of AgxPd1-x (0.4 <= x <= 0.6) alloys Butt MZ, Bashir F, Arooj S |
747 - 753 |
Substrate-tilt angle effect on structural and optical properties of sputtered ZnO film Pang HF, Zhang GA, Tang YL, Fu YQ, Wang LP, Zu XT, Placido F |
754 - 757 |
Effect of atomic deuterium irradiation on initial growth of Sn and Ge1-xSnx on Ge(001) substrates Shinoda T, Nakatsuka O, Shimura Y, Takeuchi S, Zaima S |
758 - 763 |
A study of ZnO:B films for thin film silicon solar cells Yin J, Zhu H, Wang Y, Wang Z, Gao J, Mai Y, Ma Y, Wan M, Huang Y |
764 - 768 |
Preparation and anti-icing of superhydrophobic PVDF coating on a wind turbine blade Peng CY, Xing SL, Yuan ZQ, Xiao JY, Wang CQ, Zeng JC |
769 - 773 |
Electrostatic spray deposition of nanoporous CoO/Co composite thin films as anode materials for lithium-ion batteries Sun Y, Du C, Feng XY, Yu Y, Lieberwirth I, Chen CH |
774 - 779 |
Hydrophobically modified sodium humate surfactant: Ultra-low interfacial tension at the oil/water interface Zhang JM, Li G, Yang F, Xu N, Fan HX, Yuan T, Chen L |
780 - 790 |
Numerical prediction of heat affected layer in the EDM of aeronautical alloys Izquierdo B, Plaza S, Sanchez JA, Pombo I, Ortega N |
791 - 798 |
Influence of the surface morphology on the early stages of Cu oxidation Luo LL, Kang YH, Yang JC, Zhou GW |
799 - 805 |
Bioactive glass-ceramic coating for enhancing the in vitro corrosion resistance of biodegradable Mg alloy Ye XY, Cai S, Dou Y, Xu GH, Huang K, Ren MG, Wang XX |
806 - 810 |
Room temperature pulsed laser deposited ZnO thin films as photoluminiscence gas sensors Padilla-Rueda D, Vadillo JM, Laserna JJ |
811 - 815 |
Magnetron sputtering SiC films on nickel photonic crystals with high emissivity for high temperature applications Li ZY, Yang LL, Ge DT, Ding YB, Pan L, Zhao JP, Li Y |
816 - 823 |
Effect of Zn content on the chemical conversion treatments of AZ91D magnesium alloy Hu LF, Meng QS, Chen SP, Wang H |
824 - 830 |
Preparation and tribological properties of water-soluble copper/silica nanocomposite as a water-based lubricant additive Zhang CL, Zhang SM, Yu LG, Zhang ZJ, Wu ZS, Zhang PY |
831 - 839 |
DRIFTS study of CO adsorption on praseodymium modified Pt/Al2O3 Tankov I, Cassinelli WH, Bueno JMC, Arishtirova K, Damyanova S |
840 - 846 |
Air plasma processing of poly(methyl methacrylate) micro-beads: Surface characterisations Liu CZ, Cui NY, Osbeck S, Liang H |
847 - 852 |
Super-hydrophilic surfaces by photo-induced micro-folding Bahners T, Prager L, Kriehn S, Gutmann JS |
853 - 860 |
Impact of X-ray irradiation on PMMA thin films Iqbal S, Rafique MS, Anjum S, Hayat A, Iqbal N |
861 - 861 |
'Structural characteristics of mixed oxides MOx/SiO2 affecting photocatalytic decomposition of methylene blue' (vol 258, pg 6288, 2012) Gun'ko VM, Blitz JP, Bandaranayake B, Pakhlov EM, Zarko VI, Sulym IY, Kulyk KS, Galaburda MV, Bogatyrev VM, Oranska OI, Borysenko MV, Leboda R, Skubiszewska-Zieba J, Janusz W |