Applied Surface Science

Applied Surface Science, Vol.289 Entire volume, number list

ISSN: 0169-4332 (Print)

In this Issue (86 articles)

1 - 5	Reversible low adhesive to high adhesive superhydrophobicity transition on ZnO nanoparticle surfaces Li J, Jing ZJ, Yang YX, Zha F, Yan L, Lei ZQ
6 - 13	Effect of water on hydrogenation of 1,3-butadiene over Au (111): A joint theoretical and experimental study Bu WD, Zhao L, Zhang ZC, Zhang X, Gao JS, Xu CM
14 - 20	Creation of microstructured surfaces using Cu-Ni composite electrodeposition and their application to superhydrophobic surfaces Lee JM, Bae KM, Jung KK, Jeong JH, Ko JS
21 - 26	Preparation of silver-cuprous oxide/stearic acid composite coating with superhydrophobicity on copper substrate and evaluation of its friction-reducing and anticorrosion abilities Li PP, Chen XH, Yang GB, Yu LG, Zhang PY
27 - 32	Thickness dependence of optoelectronic properties in ALD grown ZnO thin films Singh T, Lehnen T, Leuning T, Sahu D, Mathur S
33 - 41	The electrochemical behaviour of 316L austenitic stainless steel in Cl-containing environment under different H2S partial pressures Ding JH, Zhang L, Lu MX, Wang J, Wen ZB, Hao WH
42 - 46	Structural and magnetic properties in Mn-doped ZnO films prepared by pulsed-laser deposition Li Q, Wang YY, Liu JD, Kong W, Ye BJ
47 - 52	Role of surface on the size-dependent mechanical properties of copper nano-wire under tensile load: A molecular dynamics simulation Liu WT, Hsiao CI, Hsu WD
53 - 61	Synthesis, characterization and performance evaluation of three-layered photoanodes by introducing a blend of WO3 and Fe2O3 for dye degradation Hosseini S, Eftekhari E, Soltani SM, Babadi FE, Minggu LJ, Ismail MHS
62 - 71	Multiple nanoscale parallel grooves formed on Si3N4/TiC ceramic by femtosecond pulsed laser Xing YQ, Deng JX, Lian YS, Zhang KD, Zhang GD, Zhao J
72 - 76	Efficiency enhancement for dye-sensitized solar cells with a porous NiO/Pt counter electrode Maiaugree W, Kongprakaiwoot N, Tangtrakarn A, Saekow S, Pimanpang S, Amornkitbamrung V
77 - 80	Study of electronic sputtering of CaF2 thin films Pandey RK, Kumar M, Khan SA, Kumar T, Tripathi A, Avasthi DK, Pandey AC
81 - 88	The inter-adsorbate interaction mediated by Shockley-type surface state electrons and dipole moment: Cs and Ba atoms absorbed on Ag (111) films Zhang SY, Zhang H, Miyamoto Y
89 - 96	Nucleation and characterization of hydroxyapatite on thioglycolic acid-capped reduced graphene oxide/silver nanoparticles in simplified simulated body fluid Zhao J, Zhang ZC, Yu ZW, He ZN, Yang SS, Jiang HY
97 - 106	Multifractal characterization of single wall carbon nanotube thin films surface upon exposure to optical parametric oscillator laser irradiation Talu S, Markovic Z, Stach S, Markovic BT, Talu M
107 - 113	Adsorptive removal of sulfur compounds using IRMOF-3 at ambient temperature Wang XL, Fan HL, Tian Z, He EY, Li Y, Ju SG
114 - 123	The effect of increasing V content on the structure, mechanical properties and oxidation resistance of Ti-Si-V-N films deposited by DC reactive magnetron sputtering Fernandes F, Loureiro A, Polcar T, Cavaleiro A
124 - 128	Improved of the wear resistance of carbon nanofiber/epoxy nanocomposite by a surface functionalization of the reinforcement Barrena MI, de Salazar JMG, Soria A, Canas R
129 - 140	Analysis of electrochemical noise (ECN) data in time and frequency domain for comparison corrosion inhibition of some azole compounds on Cu in 1.0 M H2SO4 solution Ramezanzadeh B, Arman SY, Mehdipour M, Markhali BP
141 - 144	Correlations between the oxygen deficiency and the laser damage resistance of different oxide films Xu C, Yi P, Fan HL, Qi JW, Qiang YH, Liu JT, Tao CX, Li DW
145 - 149	Effect of electropolymerization time on the performance of poly(3,4-ethylenedioxythiophene) counter electrode for dye-sensitized solar cells Gao MQ, Xu YL, Bai Y, Jin SH
150 - 154	Electrospray aerosol deposition of water soluble polymer thin films Sweet ML, Pestov D, Tepper GC, McLeskey JT
155 - 159	Adsorption behavior of poly(dimethyl-diallylammonium chloride) on pulp fiber studied by cryo-time-of-flight secondary ion mass spectrometry and cryo-scanning electron microscopy Masumi T, Matsushita Y, Aoki D, Takama R, Saito K, Kuroda K, Fukushima K
160 - 166	Morphology and crystalline phase characteristics of alpha-GST films irradiated by a picosecond laser Zhao JJ, Liu FR, Han XX, Bai N, Wan YH, Lin X, Liu F
167 - 172	Transverse magnetoresistance induced by electron-surface scattering on thin gold films: Experiment and theory Oyarzun S, Henriquez R, Suarez MA, Moraga L, Kremer G, Munoz RC
173 - 179	Application of different fatigue strength criteria on shot peened notched parts. Part 2: nominal and local stress approaches Bagherifard S, Guagliano M
180 - 187	Application of different fatigue strength criteria to shot peened notched components. Part 1: Fracture Mechanics based approaches Bagherifard S, Colombo C, Guagliano M
188 - 196	Microstructure, mechanical property and wear performance of cold sprayed A15056/SiCp composite coatings: Effect of reinforcement content Yu M, Suo XK, Li WY, Wang YY, Liao HL
197 - 202	Investigation of the surface morphologies and the microstructures of graphite cathodes for explosive emission Zhou F, Wan H, Chuan JB, Bai SX, Wu P
203 - 208	Solar Spectrum Photocatalytic Conversion of CO2 and Water Vapor Into Hydrocarbons Using TiO2 Nanoparticle Membranes Rani S, Bao NZ, Roy SC
209 - 217	Synthesis and characterization of nanostructured poly(methyl methacrylate) for antireflection coating Dai MW, Wang Y, Pan MZ, Lin SH, Rempel GL, Pan QM
218 - 223	Correlation between sol-gel reactivity and wettability of silica films deposited on stainless steel Houmard M, Nunes EHM, Vasconcelos DCL, Berthome G, Joud JC, Langlet M, Vasconcelos WL
224 - 229	Enhanced photocatalytic performance of Bi2O3/H-ZSM-5 composite for rhodamine B degradation under UV light irradiation Wang QZ, Hui J, Yang L, Huang HH, Cai YX, Yin SQ, Ding YM
230 - 236	Effect of prior laser microstructural refinement on the formation of amorphous layer in an Al86Co7.6Ce6.4 alloy Li CL, Murray JW, Voisey KT, Clare AT, McCartney DG
237 - 244	Promotional effect of fluorine on the selective catalytic reduction of NO with NH3 over CeO2-TiO2 catalyst at low temperature Zhang R, Zhong Q, Zhao W, Yu LM, Qu HX
245 - 251	A green synthesis of magnetic bentonite material and its application for removal of microcystin-LR in water Lian LL, Cao XL, Wu YQ, Sun DZ, Lou DW
252 - 256	Tunable photoluminescence properties of well-aligned ZnO nanorod array by oxygen plasma post-treatment Jiang S, Ren ZH, Gong SY, Yin SM, Yu YF, Li X, Xu G, Shen G, Han GR
257 - 265	Temperature dependent rotation of the uniaxial easy axis of magnetization in granular SiO2-(CofFe/CoFe2)-Si(111) multilayers Bittova BP, Lancok J, Klementova M, Vejpravova J
266 - 273	Controllable growth of BiOCl film with high percentage of exposed {001} facets Wu SJ, Wang C, Cui YF
274 - 280	Effects of nanosecond-pulsed laser irradiation on nanostructure formation on the surface of thin Au films on Si02 glass substrates Yu RX, Shibayama T, Meng X, Takayanagi S, Yoshida Y, Yatsu S, Watanabe S
281 - 288	Fabrication of hierarchically structured rutile TiO2 nanorods on mica particles and their superhydrophilic coating without UV irridiation Gao Q, Wu XM, Fan YM, Zhou XY
289 - 299	Electrochromic performance, wettability and optical study of copper manganese oxide thin films: Effect of annealing temperature Falahatgar SS, Ghodsi FE, Tepehan FZ, Tepehan GG, Turhan I
300 - 305	Fabrication of silicon nanopillar arrays by cesium chloride self-assembly and wet electrochemical etching for solar cell Liu J, Zhang XS, Dong GQ, Liao YX, Wang B, Zhang TC, Yi FT
306 - 315	Effect of calcined atmosphere on the photocatalytic activity of P-doped TiO2 Xia Y, Jiang YS, Li FF, Xia MS, Xue B, Li YJ
316 - 325	Study on the structure, acidic properties of V-Zr nanocrystal catalysts in oxidative dehydrogenation of propane Chen S, Ma F, Xu AX, Wang LN, Chen F, Lu WM
326 - 331	Property of anodic coatings obtained in an organic, environmental friendly electrolyte on aluminum alloy 2024-T3 Zhang RF, Shi HW, Liu ZL, Zhang SF, Zhang YQ, Guo SB
332 - 337	Nonvolatile memory capacitors based on Al2O3 tunneling and HfO2 blocking layers with charge storage in atomic-layer-deposited Pt nanocrystals Liu XJ, Zhu L, Gao MY, Li XF, Cao ZY, Zhai HF, Li AD, Wu D
338 - 344	Surface characterization of TiNi deformed by high-pressure torsion Shri DNA, Tsuchiya K, Yamamoto A
345 - 350	Deposition of ZnO rods by electrochemically induced hydrolysis Steegstra P, Ahlberg E
351 - 357	Structural, electronic properties and stability of AlCMn3 (111) surfaces by first-principles calculations Wang F, Li K, Zhou NG
358 - 365	Electron irradiation-enhanced water and hydrocarbon adsorption in EUV lithography devices Al-Ajlony A, Kanjilal A, Catalfano M, Harilal SS, Hassanein A
366 - 369	High resolution microstructure characterization of the interface between cold sprayed Al coating and Mg alloy substrate Wang Q, Qiu D, Xiong YM, Birbilis N, Zhang MX
370 - 377	Study on depth-related microstructure and wear property of rare earth nitrocarburized layer of M50NiL steel Yan MF, Zhang CS, Sun Z
378 - 383	Microstructure and oxygen evolution of Fe-Ce mixed oxides by redox treatment Li KZ, Haneda M, Ning PH, Wang H, Ozawa M
384 - 387	Hybrid structure of graphene sheets/ZnO nanorods for enhancing electron field emission properties Lin JC, Huang BR, Lin TC
388 - 393	Oxidation upon segregation: Evaluation of chemical state of segregated species in polycrystalline Fe-Si-Al alloys by AES Mandrino D, Petrovic DS
394 - 399	Graphite-like C3N4 modified Ag3PO4 nanoparticles with highly enhanced photocatalytic activities under visible light irradiation Xiu ZL, Bo H, Wu YZ, Hao XP
400 - 406	Preparation and tribological properties of inclusion complex of beta-cyclodextrinfdialkyl pentasulfide as additive in PEG-600 aqueous solution Guan JJ, Xu XF, Li G, Peng W
407 - 416	A novel ToF-SIMS operation mode for sub 100 nm lateral resolution: Application and performance Kubicek M, Holzlechner G, Opitz AK, Larisegger S, Hutter H, Fleig J
417 - 424	Construction of superhydrophobic and superoleophilic nickel foam for separation of water and oil mixture Gao R, Liu Q, Wang J, Liu JY, Yang WL, Gao Z, Liu LH
425 - 429	Tunable surface wettability and water adhesion of Sb2S3 micro-fnanorod films Zhong X, Zhao HP, Yang H, Liu YL, Yan GP, Chen R
430 - 436	Investigations on the role of alkali to obtain modulated defect concentrations for Cu2O thin films Chowdhury A, Bijalwan PK, Sahu RK
437 - 444	Microstructure and wear resistance of the hypereutectic Fe-Cr-C alloy hardfacing metals with different La2O3 additives Yang J, Tian JJ, Hao FF, Dan T, Ren XJ, Yang YL, Yang QX
445 - 449	Modulating magnetic characteristics of Pt embedded graphene by gas adsorption (N-2, O-2, NO2, SO2) Lee Y, Lee S, Hwang Y, Chung YC
450 - 454	Physico-chemical studies of cuprous oxide (Cu2O) nanoparticles coated on amorphous carbon nanotubes (alpha-CNTs) Johan MR, Suhaimy SHM, Yusof Y
455 - 461	Nanohardness, corrosion and protein adsorption properties of CuAlO2 films deposited on 316L stainless steel for biomedical applications Chang SH, Chen JZ, Hsiao SH, Lin GW
462 - 471	Optical and magnetic properties of Fe2O3 nanoparticles synthesized by laser ablation/fragmentation technique in different liquid media Pandey BK, Shahi AK, Shah J, Kotnala RK, Gopal R
472 - 477	Low electrical potential anode modified with Fe/ferric oxide and its application in marine benthic microbial fuel cell with higher voltage and power output Fu YB, Xu Q, Zai XR, Liu YY, Lu ZK
478 - 486	Task-specific ionic liquid as a new green inhibitor of mild steel corrosion Kowsari E, Payami M, Amini R, Ramezanzadeh B, Javanbakht M
487 - 494	Application of novel Polypyrrole/thiol-functionalized zeolite Beta/MCM-41 type mesoporous silica nanocomposite for adsorption of Hg2+ from aqueous solution and industrial wastewater: Kinetic, isotherm and thermodynamic studies Javadian H, Taghavi M
495 - 501	Adsorption of cationic dye (methylene blue) from aqueous solution using poly(cyclotriphosphazene-co-4,4'-sulfonyldiphenol) nanospheres Chen ZH, Fu JW, Wang MH, Wang XZ, Zhang JN, Xu Q
502 - 510	DFT study of benzene and CO co-adsorption on PtCo(111) Orazi V, Ardenghi JS, Bechthold P, Jasen PV, Pronsato ME, Gonzalez EA
511 - 523	Improving degradation resistance of sisal fiber in concrete through fiber surface treatment Wei JQ, Meyer C
524 - 528	Effect of pH on film structure and electrical property of PMMA-Au composite particles prepared by redox transmetalation Wu HM, Lin KJ, Yu YH, Ho CY, Wei MH, Lu FH, Tseng WJ
529 - 532	Fabrication of through holes in silicon carbide using femtosecond laser irradiation and acid etching Khuat V, Ma YC, Si JH, Chen T, Chen F, Hou X
533 - 537	Etching of CVD diamond films using oxygen ions in ECR plasma Ma ZB, Wu J, Shen WL, Yan L, Pan X, Wang JH
538 - 544	Deposition of Cr-Si-Ni-Mo films at a low sputtering current and performance of heat and humid resistance Wang XY, Li CG, Ma JX, Shao JQ
545 - 550	Graded composite diamond coatings with top-layer nanocrystallinity and interfacial integrity: Cross-sectional Raman mapping Dumpala R, Ramamoorthy B, Rao MSR
551 - 559	Influence of processing conditions on the structure, composition and ferroelectric properties of sputtered PZT thin films on Ti-substrates Bose A, Sreemany M
560 - 563	Surface and interface analysis of poly-hydroxyethylmethacrylate-coated anodic aluminium oxide membranes Ali N, Duan XF, Jiang ZT, Goh BM, Lamb R, Tadich A, Poinern GEJ, Fawcett D, Chapman P, Singh P
564 - 570	Influence of annealing conditions on the crystallographic structure, chemical composition and luminescence of ZnO thin films Khojier K, Savaloni H, Amani E
571 - 580	Spatially controlled immobilisation of biomolecules: A complete approach in green chemistry Grinenval E, Nonglaton G, Vinet F
581 - 585	Electrical properties of SiGe nanowire following fluorine/nitrogen plasma treatment Chang KM, Chen CF, Lai CH, Kuo PS, Chen YM, Chang TY
586 - 591	Surface treatment of polymer microfibrillar structures for improved surface wettability and adhesion Peyvandi A, Abideen SU, Huang Y, Lee I, Soroushian P, Lu J
592 - 600	Microporosity development in phenolic resin-based mesoporous carbons for enhancing CO2 adsorption at ambient conditions Choma J, Jedynak K, Fahrenholz W, Ludwinowicz J, Jaroniec M
601 - 605	Effects of ozone post deposition treatment on interfacial and electrical characteristics of atomic-layer-deposited Al2O3 and HfO2 films on GaSb substrates Zhao LF, Tan Z, Wang J, Xu J