1 - 4 |
Microwave absorption properties of cobalt ferrite-modified carbonized bacterial cellulose Ren Y, Li SR, Dai B, Huang XH |
5 - 8 |
Transport properties of polycrystalline boron doped diamond de Oliveira JR, Berengue OM, Moro J, Ferreira NG, Chiquito AJ, Baldan MR |
9 - 13 |
Effects of silver adatoms on the electronic structure of silicene Ersan F, Arslanalp O, Gokoglu G, Akturk E |
14 - 26 |
Defect-induced magnetism in undoped and Mn-doped wide band gap zinc oxide grown by aerosol spray pyrolysis Motaung DE, Kortidis I, Papadaki D, Nkosi SS, Mhlongo GH, Wesley-Smith J, Malgas GF, Mwakikunga BW, Coetsee E, Swart HC, Kiriakidis G, Ray SS |
27 - 32 |
Influence of microwave irradiation on ilmenite surface properties Nuri OS, Mehdilo A, Irannajad M |
33 - 39 |
Chemical composition and selected mechanical properties of Al-Zn alloy modified in plasma conditions by RF CVD Kyziol K, Kluska S, Janus M, Sroda M, Jastrzebski W, Kaczmarek L |
40 - 46 |
Insight into the adsorption and decomposition mechanism of H2S on clean and S-covered Au (100) surface: A theoretical study Jiang Z, Li MM, Qin P, Fang T |
47 - 53 |
Research of the recast layer on implant surface modified by micro-current electrical discharge machining using deionized water mixed with titanium powder as dielectric solvent Chen SL, Lin MH, Huang GX, Wang CC |
54 - 61 |
Hydroxyapatite electrodeposition on anodized titanium nanotubes for orthopedic applications Parcharoen Y, Kajitvichyanukul P, Sirivisoot S, Termsuksawad P |
62 - 67 |
Enhancing stabilities of lipase by enzyme aggregate coating immobilized onto ionic liquid modified mesoporous materials Zou B, Song CY, Xu XP, Xia JJ, Huo SH, Cui FJ |
68 - 73 |
Etching of new phase change material Ti0.5Sb2Te3 by Cl-2/Ar and CF4/Ar inductively coupled plasmas Zhang ZH, Song SN, Song ZT, Cheng Y, Zhu M, Li XY, Zhu YQ, Guo XH, Yin WJ, Wu LC, Liu B, Feng SL, Zhou D |
74 - 82 |
A study of hydrogen sensing properties and microstructure for highly dispersed Pd SnO2 thin films with high response magnitude Yang L, Yin CB, Zhang ZL, Zhu B |
83 - 88 |
Transmission electron microscopy study of amorphous Ge2Sb2Te5 films induced by an ultraviolet single-pulse laser Zhao JJ, Liu FR, Han XX, Zhu Z, Lin X, Liu F, Sun NX |
89 - 94 |
Hydrophobic to superhydrophobic surface modification using impacting particulate sprays Lau CY, Vuong T, Wang JM, Muradoglu M, Liew OW, Ng TW |
95 - 100 |
ArF excimer laser-induced deposition of Ag/C nanocomposite thin films in the presence of n-Hexane Gondal MA, Fajgar R, Chang XF, Shen K, Xu QY |
101 - 106 |
Hot embossing holographic images in BOPP shrink films through large-area roll-to-roll nanoimprint lithography Jiang ML, Lin SW, Jiang WK, Pan NQ |
107 - 109 |
CO2 adsorption on LTA zeolites: Effect of mesoporosity Chen C, Ahn WS |
110 - 116 |
Effect of the deposition conditions of NiO anode buffer layers in organic solar cells, on the properties of these cells Nguyen DT, Ferrec A, Keraudy J, Bernede JC, Stephant N, Cattin L, Jouan PY |
117 - 123 |
Electrical properties improvement of high-k HfO2 films by combination of C4F8 dual-frequency capacitively coupled plasmas treatment with thermal annealing Zhang HY, Ye C, Jin CG, Wu MZ, Wang YY, Zhang Z, Huang TY, Yang Y, He HJ, Zhuge LJ, Wu XM |
124 - 130 |
Effects of argon gas flow rate on the microstructure and micromechanical properties of supersonic plasma sprayed nanostructured Al2O3-13 wt.%TiO2 coatings Li GL, Ma JL, Wang HD, Kang JJ, Xu BS |
131 - 138 |
Surface characterization of the cement for retention of implant supported dental prostheses: In vitro evaluation of cement roughness and surface free energy Brajkovic D, Antonijevic D, Milovanovic P, Kisic D, Zelic K, Djuric M, Rakocevic Z |
139 - 146 |
An amperometric hydrogen peroxide biosensor based on Co3O4 nanoparticles and multiwalled carbon nanotube modified glassy carbon electrode Kacar C, Dalkiran B, Erden PE, Kilic E |
147 - 157 |
Crystal growth and design of a facile synthesized uniform single crystalline football-like anatase TiO2 microspheres with exposed {001} facets Liu BT, Jin CH, Ju Y, Peng LL, Tian LL, Wang JB, Zhang TJ |
158 - 163 |
Characterization and thermal shock behavior of composite ceramic coating doped with ZrO2 particles on TC4 by micro-arc oxidation Zhong YS, Shi LP, Li MW, He F, He XD |
164 - 171 |
Enhanced visible light photocatalytic performance of g-C3N4 photocatalysts co-doped with iron and phosphorus Hu SZ, Ma L, You JG, Li FY, Fan ZP, Lu G, Liu D, Gui JZ |
172 - 176 |
Fabrication and characterization of solution processed vertically aligned ZnO microrods Gadallah AS |
177 - 181 |
Copper (II) oxide nanowires for p-type conductometric NH3 sensing Shao F, Hernandez-Ramirez F, Prades JD, Fabrega C, Andreu T, Morante JR |
182 - 188 |
A versatile cost-effective and one step process to engineer ZnO superhydrophobic surfaces on Al substrate Siddaramanna A, Saleema N, Sarkar DK |
189 - 200 |
Environmentally benign electroless nickel plating using supercritical carbon-dioxide on hydrophilically modified acrylonitrile-butadiene-styrene Tengsuwan S, Ohshima M |
201 - 207 |
Surface modification of the metal plates using continuous electron beam process (CEBP) Kim J, Kim JS, Kang EG, Park HW |
208 - 213 |
SiC coating toughened by HfC nanowires to protect C/C composites against oxidation Zhang YL, Ren JC, Tian S, Li HJ, Hu ZX |
214 - 223 |
Microstructure and hot corrosion behaviors of two Co modified aluminide coatings on a Ni-based superalloy at 700 degrees C Fan QX, Jiang SM, Yu HJ, Gong J, Sun C |
224 - 229 |
Annealing effect on Schottky barrier inhomogeneity of graphene/n-type Si Schottky diodes Lin YJ, Lin JH |
230 - 238 |
The vital role of PANI for the enhanced photocatalytic activity of magnetically recyclable N-K2Ti4O9/MnFe2O4/PANI composites Chen Q, He QQ, Lv MM, Liu XT, Wang J, Lv JP |
239 - 244 |
Effect of nitrogen high temperature plasma based ion implantation on the creep behavior of Ti-6Al-4V alloy Oliveira AC, Oliveira RM, Reis DAP, Carreri FC |
245 - 251 |
Au hollow nanospheres on graphene support as catalyst for sodium borohydride electrooxidation Ojani R, Valiollahi R, Raoof JB |
252 - 257 |
Electrochemical doping of mesoporous silicon with Er: the effect of the current intensity Mula G, Pinna E, Falqui A, Ruffilli R, Palmas S, Mascia M |
258 - 263 |
DFT study of ethyl xanthate interaction with sphalerite (110) surface in the absence and presence of copper Liu J, Wen SM, Deng JS, Chen XM, Feng QC |
264 - 272 |
Adsorption of copper to different biogenic oyster shell structures Wu Q, Chen J, Clark M, Yu Y |
273 - 278 |
Effects of silica surface on the ordered orientation of polyethylene: A molecular dynamics study Mo YF, Yang CL, Xing YF, Wang MS, Ma XG, Wang LZ |
279 - 291 |
Antibacterial and bioactive nanostructured titanium surfaces for bone integration Ferraris S, Venturello A, Miola M, Cochis A, Rimondini L, Spriano S |
292 - 299 |
Configurational effects of collagen/ALP coatings on enzyme immobilization and surface mineralization Bosco R, Leeuwenburgh SCG, Jansen JA, van den Beucken JJJP |
300 - 307 |
Sulfur passivation of InSb(100) surfaces: Comparison of aqueous and alcoholic ammonium sulfide solutions using X-ray photoemission spectroscopy Lvova TV, Shakhmin AL, Sedova IV, Lebedev MV |
308 - 313 |
Photocatalytic investigations of TiO2-P25 nanocomposite thin films prepared by peroxotitanic acid modified sol-gel method Oshani F, Marandi R, Rasouli S, Farhoud MK |
314 - 323 |
Orthogonal synthesis, structural characteristics, and enhanced visible-light photocatalysis of mesoporous Fe2O3/TiO2 heterostructured microspheres Wang T, Yang GD, Liu J, Yang BL, Ding SJ, Yan ZF, Xiao TC |
324 - 329 |
Morphological studies of Ni clusters on SrTiO3 (001) and (110) Tanaka M |
330 - 338 |
Comparison of surface fractal dimensions of chromizing coating and P110 steel for corrosion resistance estimation Lin NM, Guo JW, Xie FQ, Zou JJ, Tian W, Yao XF, Zhang HY, Tang B |
339 - 343 |
Aggregated TiO2 nanotubes with high field emission properties Huang BR, Lin JC, Lin TC, Chen YJ |
344 - 350 |
Study of different thermal processes on boron-doped PERL cells Li WJ, Wang ZJ, Han PY, Lu HY, Yang J, Guo Y, Shi ZR, Li GH |
351 - 356 |
Fabrication and electromagnetic interference shielding performance of open-cell foam of a Cu-Ni alloy integrated with CNTs Ji KJ, Zhao HH, Zhang J, Chen J, Dai ZD |
357 - 361 |
High selectivity of benzene electrochemical oxidation to p-benzoquinone on modified PbO2 electrode Li XL, Li XM, Tang S, Yang J, Li WL, Luo BB, Yu YJ, Li SY |
362 - 368 |
DFT study of CO sensing mechanism on hexagonal WO3 (001) surface: The role of oxygen vacancy Tian FH, Zhao LH, Xue XY, Shen YY, Jia XF, Chen SG, Wang ZH |
369 - 376 |
Characterizations of nano-TiO2/diatomite composites and their photocatalytic reduction of aqueous Cr (VI) Sun Q, Li H, Zheng SL, Sun ZM |
377 - 383 |
Chemical functionalization of graphene by carbene cycloaddition: A density functional theory study Zan WY |
384 - 390 |
Enhanced photocatalytic activity of TiO2/carbon@TiO2 core-shell nanocomposite prepared by two-step hydrothermal method Zhang GZ, Teng F, Zhao CH, Chen LL, Zhang P, Wang YQ, Gong CS, Zhang ZX, Xie EQ |
391 - 398 |
Temperature-dependent composition of Fe/TiO2(110) and Fe/TiO2(001) interfaces Busiakiewicz A |
399 - 404 |
Studies on the photocatalysis of core-shelled SiO2-Ag nanospheres by controlled surface plasmon resonance under visible light Pan KY, Liang YF, Pu YC, Hsu YJ, Yeh JW, Shih HC |
405 - 412 |
Selective detection of ammonia using spray pyrolysis deposited pure and nickel doped ZnO thin films Mani GK, Rayappan JBB |
413 - 421 |
From crater eruption to surface purification of raw silicon: A treatment by pulsed electron beam Gao YY, Qin Y, Dong C, Li GZ |
422 - 425 |
Distinct spatial profiles and antibacterial effects of 20-nm Ag nanoparticles dripped on ZnO nanorods grown on a polished Ti substrate Chen H, Chen CP, Yu CTR, Chen YT, Teng CC, Lo KY, Lin CH, Huang BY |
426 - 434 |
Structural properties of ultrathin Pb layers on Ru(0001) revealed by LEED, AES and DFT Jurczyszyn M, Topolnicki R, Nowicki M, Kucharczyk R |
435 - 442 |
Effect of carbon on the Ni catalyzed methane cracking reaction: A DFT study Li JD, Croiset E, Ricardez-Sandoval L |
443 - 447 |
Micro structural, electrical and optical properties of highly (220) oriented spinel Mn-Co-Ni-O film grown by radio frequency magnetron sputtering Zhou W, Zhang LB, Ouyang C, Wu J, Huang ZM, Xu XF |
448 - 460 |
The usability and preliminary effectiveness of ultrasonic nanocrystalline surface modification technique on surface properties of silicon carbide Amanov A, Pyun YS, Kim JH, Sasaki S |
461 - 467 |
Superhydrophobic and colorful copper surfaces fabricated by picosecond laser induced periodic nanostructures Long JY, Fan PX, Zhong ML, Zhang HJ, Xie YD, Lin C |
468 - 477 |
Hydrophobic treatment on polymethylmethacrylate surface by nanosecond-pulse DBDs in CF4 at atmospheric pressure Zhang C, Zhou Y, Shao T, Xie Q, Xu JY, Yang WJ |
478 - 483 |
Atomic Layer Deposition of oriented nickel titanate (NiTiO3) Bratvold JE, Fjellvag H, Nilsen O |
484 - 489 |
Influences of carbon content and coating carbon thickness on properties of amorphous CoSnO3@C composites as anode materials for lithium-ion batteries Fan FQ, Fang GQ, Zhang RX, Xu YH, Zheng JW, Li DC |
490 - 497 |
Poly(ethylene glycol)/carbon quantum dot composite solid films exhibiting intense and tunable blue-red emission Hao YL, Gan ZX, Xu JQ, Wu XL, Chu PK |
498 - 502 |
Effect of sterilization and water rinsing on cell adhesion to titanium surfaces Hirano M, Kozuka T, Asano Y, Kakuchi Y, Arai H, Ohtsu N |
503 - 507 |
Electrical and magnetic effect of transition metals in SnSb nanoalloy Nithyadharseni P, Nalini B, Saravanan P |
508 - 520 |
The effect of heat treatment on the surface structure of polyaniline nanostructured film: An experimental and molecular dynamics approach Bahramian A |
521 - 528 |
Nanoscale anatase TiO2 with dominant {111} facets shows high photocatalytic activity Zhang J, Qian LS, Yang LX, Tao X, Su KP, Wang HB, Xi JH, Ji ZG |
529 - 533 |
Transferable, conductive TiO2 nanotube membranes for optoelectronics Liu GH, Chen T, Sun YL, Chen G, Wang KY |
534 - 540 |
The effect of large-area pulsed electron beam melting on the corrosion and microstructure of a Ti6Al4V alloy Walker JC, Murray JW, Nie M, Cook RB, Clare AT |
541 - 548 |
Highly reflective and adhesive surface of aluminized polyvinyl chloride film by vacuum evaporation Li DN, Tai QL, Feng Q, Li Q, Xu XZ, Li HR, Huang J, Dong LJ, Xie HA, Xiong CX |
549 - 557 |
Significant tunability of thin film functionalities enabled by manipulating magnetic and structural nano-domains Golovchanskiy IA, Pan AV, Fedoseev SA, Higgins M |
558 - 566 |
AFM nanoscale indentation in air of polymeric and hybrid materials with highly different stiffness Suriano R, Credi C, Levi M, Turri S |
567 - 573 |
Surface morphology, microstructure and properties of as-cast AZ31 magnesium alloy irradiated by high intensity pulsed ion beams Ma XS, Zhang G, Wang GT, Zhu GL, Zhou W, Wang J, Sun BD |
574 - 581 |
Fabrication, characterization, and photocatalytic performance of exfoliated g-C3N4-TiO2 hybrids Chang F, Zhang J, Xie YC, Chen J, Li CL, Wang J, Luo JR, Deng BQ, Hu XF |
582 - 592 |
Preparation of Ag/TiO2/SiO2 films via photo-assisted deposition and adsorptive self-assembly for catalytic bactericidal application Xi BJ, Chu XN, Hu JY, Bhatia CS, Danner AJ, Yang H |
593 - 601 |
Improved microwave shielding behavior of carbon nanotube-coated PET fabric using plasma technology Haji A, Rahbar RS, Shoushtari AM |
602 - 608 |
Controllable fabrication of CuO nanostructure by hydrothermal method and its properties Jiang TT, Wang YQ, Meng DW, Wu XL, Wang JX, Chen JY |
609 - 613 |
A low temperature situ precipitation route to designing Zn-doped SnO2 photocatalyst with enhanced photocatalytic performance Jia XH, Liu YY, Wu XY, Zhang Z |
614 - 620 |
Visible light emission and UV light detection properties of solution-grown ZnO/polymer heterojunction diodes on stainless steel foil Rakhshani AE |
621 - 625 |
Piezoelectric effect of one-dimensional gear-shaped ZnO microwires Yin B, Qiu Y, Zhang HQ, Lei JX, Ji JY, Li LP, Hu LZ |
626 - 634 |
Alginate/chitosan based bi-layer composite membrane as potential sustained-release wound dressing containing ciprofloxacin hydrochloride Han F, Dong Y, Song AH, Yin R, Li SM |
635 - 642 |
Electrodeposition of single gamma phased Zn-Ni alloy coatings from additive-free acidic bath Ghaziof S, Gao W |
643 - 647 |
11-Hydroxyundecyl octadecyl disulfide self-assembled monolayers on Au(111) Albayrak E, Karabuga S, Bracco G, Danisman MF |
648 - 658 |
Structural, morphological and optical properties of Cd doped ZnO film grown on a- and r-plane sapphire substrate by MOCVD Fouzri A, Boukadhaba MA, Toure A, Sakly N, Bchetnia A, Sallet V |
659 - 665 |
Silver nanoparticles in combination with acetic acid and zinc oxide quantum dots for antibacterial activities improvement-A comparative study Sedira S, Ayachi AA, Lakehal S, Fateh M, Achour S |
666 - 671 |
Facile synthesis of gold coated copper(II) hydroxide pine-needle-like micro/nanostructures for surface-enhanced Raman scattering Long KL, Du DY, Luo XG, Zhao WW, Wu ZT, Si LF, Qiu T |
672 - 675 |
Synthesize of barium ferrite nanowire array by self-fabricated porous silicon template Zheng H, Han MG, Deng JX, Zheng L, Wu J, Deng LJ, Qin HB |
676 - 683 |
Asymmetrically modulating the insulator-metal transition of thermochromic VO2 films upon heating and cooling by mild surface-etching Kang LT, Xie LL, Chen Z, Gao YF, Liu XG, Yang YZ, Liang W |
684 - 689 |
Silane surface modification for improved bioadhesion of esophageal stents Karakoy M, Gultepe E, Pandey S, Khashab MA, Gracias DH |
690 - 696 |
In situ DRIFTS investigation for the oxidation of toluene by ozone over Mn/HZSM-5, Ag/HZSM-5 and Mn-Ag/HZSM-5 catalysts Li J, Na HB, Zeng XL, Zhu TL, Liu ZM |
697 - 702 |
Excellent resistive switching property and physical mechanism of amorphous TiO2 thin films fabricated by a low-temperature photochemical solution deposition method Zou LL, Hu W, Xie W, Chen RQ, Qin N, Li BJ, Bao DH |
703 - 708 |
Investigation of the biofouling properties of several algae on different textured chemical modified silicone surfaces Xu JH, Zhao WJ, Peng SS, Zeng ZX, Zhang X, Wu XD, Xue QJ |
709 - 714 |
Microstructure and wear behavior of Cu-Mo-Si coatings by laser cladding Zhang PL, Liu XP, Lu YL, Yan H, Yu ZS, Li CG, Lu QH |
715 - 720 |
Optical second harmonic generation phase measurement at interfaces of some organic layers with indium tin oxide Demon SZN, Miyauchi Y, Mizutani G, Matsushima T, Murata H |
721 - 728 |
Photocatalytic anatase titanium dioxide thin films deposition by an atmospheric pressure blown arc discharge Boscher ND, Olivier S, Maurau R, Bulou S, Sindzingre T, Belmonte T, Choquet P |
729 - 733 |
Physical properties of chemically deposited Bi2S3 thin films using two post-deposition treatments Moreno-Garcia H, Messina S, Calixto-Rodriguez M, Martinez H |
734 - 739 |
Comparison of the influence of polyaspartic acid and polylysine functional groups on the adsorption at the Cr2O3-Aqueous polymer solution interface Ostolska I, Wisniewska M |
740 - 748 |
Energy level alignment at the Si(111)/RCA-SiO2/copper(II) phthalocyanine ultra-thin film interface Krzywiecki M, Grzadziel L |
749 - 752 |
Distinct surface hydration behaviors of boron-rich boride thin film coatings Lu XH, Liu W, Ouyang J, Tian Y |
753 - 757 |
A facile and scalable method to produce superhydrophic stainless steel surface Frank MA, Boccaccini AR, Virtanen S |
758 - 762 |
Mo doped DLC nanocomposite coatings with improved mechanical and blood compatibility properties Tang XS, Wang HJ, Feng L, Shao LX, Zou CW |
763 - 769 |
Decomposition of methanol on partially alumina-encapsulated Pt nanoclusters supported on thin film Al2O3/NiAl(100) Chao CS, Li YD, Liao TW, Hung TC, Luo MF |
770 - 774 |
Laser-induced dry-fabrication of bibenzyl molecular layers on the silicon surface Zhang YP, Chen ZQ, Dong D, Xu GQ |
775 - 779 |
Effect of film gradient profile on adhesion strength, residual stress and effective hardness of functionally graded diamond-like carbon films Won YJ, Ki H |
780 - 788 |
Synthesis of Au nanowires with controlled morphological and structural characteristics Singh G, van Helvoort ATJ, Bandyopadhyay S, Volden S, Andreassen JP, Glomm WR |
789 - 792 |
Transient spreading of water droplet on laser micro-structured SiC surfaces Ma CH, Bai SX, Peng XD, Meng YG |
793 - 798 |
Cobalt sulfide nanotube arrays grown on FTO and graphene membranes for high-performance supercapacitor application Wan HZ, Jiang JJ, Yu JW, Ruan YJ, Peng L, Zhang L, Chen HC, Bie SW |
799 - 807 |
Effects of external force fields on peptide self-assembly and biomimetic silica synthesis Yu J, Wang QR, Zhang X |
808 - 815 |
Fabrication of three-dimensional graphene foam with high electrical conductivity and large adsorption capability Chen GQ, Liu YX, Liu F, Zhang X |
816 - 824 |
Interlayer design for the graphite-like carbon film with high load-bearing capacity under sliding-friction condition in water Wang YX, Pu JB, Wang JF, Li JL, Chen JM, Xue QJ |
825 - 830 |
Efficient adsorption of phenanthrene by simply synthesized hydrophobic MCM-41 molecular sieves Hu Y, He YY, Wang XW, Wei CH |
831 - 836 |
Surface modification of a MoSiON phase shift mask to reduce critical dimension variation after exposure to a 193-nm ArF excimer laser Choo H, Seo D, Lim S |
837 - 841 |
Temperature change effect on BaTiO3 single crystal surface around domain walls He DY, Xing XR, Qiao LJ, Volinsky AA |
842 - 850 |
Electrospinning/electrospraying vs. electrospinning: A comparative study on the design of poly(L-lactide)/zinc oxide non-woven textile Virovska D, Paneva D, Manolova N, Rashkov I, Karashanova D |
851 - 857 |
Photoelectrocatalytic oxidation of aqueous ammonia using TiO2 nanotube arrays Wang H, Zhang XF, Su Y, Yu HT, Chen S, Quan X, Yang FL |
858 - 863 |
Which affect the photoreactivity of BiOBr single-crystalline nanosheets with different hydrothermal pH value: Size or facet? Ye LQ, Su YR, Jin XL, Xie HQ, Cao FP, Guo Z |
864 - 869 |
Large-scale fabrication of superhydrophobic polyurethane/nano-Al2O3 coatings by suspension flame spraying for anti-corrosion applications Chen XY, Yuan JH, Huang J, Ren K, Liu Y, Lu SY, Li H |
870 - 875 |
Optimization of shunt isolation processing for silicon solar cells via laser and chemical etching Hao HL, Zhong SH, Zhang X, Shen WZ |
876 - 876 |
Research on cell behavior related to anodized and hydrothermally treated titanium surface Illustration: For the third author "Duen-Jeng Wang" in this article is incorrectly spelt (vol 271, pg 1, 2013) Chen CS, Tsao YL, Wang DY, Ou SF, Cheng HY, Chiang YC, Ou KL |