1 - 12 |
The anti-corrosion behavior under multi-factor impingement of Hastelloy C22 coating prepared by multilayer laser cladding Chen L, Bai SL |
13 - 18 |
Study on the surface sulfidization behavior of smithsonite at high temperature Lv JF, Tong X, Zheng YX, Xie X, Wang CB |
19 - 27 |
Microstructure and properties of Ti-Al intermetallic/Al2O3 layers produced on Ti6Al2Mo2Cr titanium alloy by PACVD method Sitek R, Bolek T, Mizera J |
28 - 40 |
Impact of annealing on features of BCP coating on NiTi shape memory alloy: Preparation and physicochemical characterization Dulski M, Dudek K, Grelowski M, Kubacki J, Hertlein J, Wojtyniak M, Goryczka T |
41 - 50 |
A green approach for single-pot synthesis of graphene oxide and its composite with Mn3O4 Rathour RKS, Bhattacharya J |
51 - 61 |
Novel Z-scheme BiOBr/reduced graphene oxide/protonated g-C3N4 photocatalyst: Synthesis, characterization, visible light photocatalytic activity and mechanism Bao YC, Chen KZ |
62 - 69 |
Compatibilization of acrylonitrile-butadiene-styrene terpolymer/poly(ethylene glycol-co-1,4-cyclohexanedimethanol terephthalate) blend: effect on morphology, interface, mechanical properties and hydrophilicity Chen TT, Zhang J |
70 - 74 |
Tailoring the charge carrier in few layers MoS2 field-effect transistors by Au metal adsorbate Singh AK, Pandey RK, Prakash R, Eom J |
75 - 81 |
A new strategy to produce low-density polyethylene (LDPE)-based composites simultaneously with high flame retardancy and high mechanical properties Shen LG, Li JX, Li RJ, Lin HJ, Chen JR, Liao BQ |
82 - 91 |
Micron-sized columnar grains of CH3NH3PbI3 grown by solvent-vaporassisted low-temperature (75 degrees C) solid-state reaction: The role of non-coordinating solvent-vapor Zheng HF, Liu YQ, Sun J |
92 - 97 |
Periodic silver nanocluster arrays over large-area silica nanosphere template as highly sensitive SERS substrate Hou X, Wang Q, Mao GM, Liu H, Yu RD, Ren XM |
98 - 102 |
Threshold voltage tuning in AlGaN/GaN HFETs with p-type Cu2O gate synthesized by magnetron reactive sputtering Wang L, Li LA, Xie T, Wang XZ, Liu XK, Ao JP |
103 - 109 |
Effects of Ti, Si, Mg and Cu additions on interfacial properties and electronic structure of Al(111)/4H-SiC(0001) interface: A first-principles study Xu XY, Wang HY, Zha M, Wang C, Yang ZZ, Jiang QC |
110 - 121 |
Nanocomposites based on graphene oxide and mesoporous silica nanoparticles: Preparation, characterization and nanobiointeractions with red blood cells and human plasma proteins Fonseca LC, de Araujo MM, de Moraes ACM, da Silva DS, Ferreira AG, Franqui LS, Martinez DST, Alves OL |
122 - 135 |
The effect of graphene oxide on surface features, biological performance and bio-stability of calcium phosphate coating applied by pulse electrochemical deposition Fathyunes L, Khalil-Allafi J |
136 - 143 |
Nitrogen-doped biomass-based ultra-thin carbon nanosheets with interconnected framework for High-Performance Lithium-Ion Batteries Guo SS, Chen YX, Shi LL, Dong Y, Ma J, Chen XH, Song HH |
144 - 151 |
Germanium growth on electron beam lithography patterned Si3N4/Si(001) substrate using molecular beam epitaxy Sarkar SS, Katiyar AK, Sarkar A, Dhar A, Rudra A, Khatri RK, Ray SK |
152 - 160 |
Microstructure and corrosion resistance of a fluorosilane modified silane-graphene film on 2024 aluminum alloy Dun YC, Zhao XH, Tang YM, Dino S, Zuo Y |
161 - 168 |
ZIF-67-derived hollow nanocages with layered double oxides shell as high-Efficiency catalysts for CO oxidation Kong WP, Li J, Chen Y, Ren YQ, Guo YH, Niu SL, Yang YZ |
169 - 175 |
Nitrogen and phosphorus co-doped carbon hollow spheres derived from polypyrrole for high-performance supercapacitor electrodes Lv BJ, Li PP, Liu Y, Lin SS, Gao BF, Lin BZ |
176 - 180 |
Whiskers growth and self-healing in Ti-based metallic glasses during ion irradiation Zhang K, Hu Z, Zhao ZG, Wei BC, Li YS, Wei YH |
181 - 189 |
Structure and mechanical properties of a two-layered material produced by the E-beam surfacing of Ta and Nb on the titanium base after multiple rolling Bataev VA, Golkovski MG, Samoylenko VV, Ruktuev AA, Polyakov IA, Kuksanov NK |
190 - 194 |
Nanowall formation by maskless wet-etching on a femtosecond laser irradiated silicon surface Lee S, Jo K, Keum HS, Chae S, Kim Y, Choi J, Lee HH, Kim HJ |
195 - 201 |
Heterogeneous hydrogenation using stable and reusable calix[4] pyrrole fenced Pt nanoparticles and its mechanistic insight Kongor A, Panchal M, Athar M, Mehta V, Bhatt K, Jha PC, Jain V |
202 - 208 |
A significant reduction of ice adhesion on nanostructured surfaces that consist of an array of single-walled carbon nanotubes: A molecular dynamics simulation study Bao LY, Huang ZY, Priezjev NV, Chen SQ, Luo K, Hu HB |
209 - 216 |
Removable polytetrafluoroethylene template based epitaxy of ferroelectric copolymer thin films Xia W, Chen QS, Zhang J, Wang H, Cheng Q, Jiang YL, Zhu GD |
217 - 226 |
Mechanical behavior of Ti-Ta-based surface alloy fabricated on TiNi SMA by pulsed electron-beam melting of film/substrate system Meisner SN, Yakovlev EV, Semin VO, Meisner LL, Rotshtein VP, Neiman AA, D'yachenko F |
227 - 232 |
Economically synthesized NiCo2S4/reduced graphene oxide composite as efficient counter electrode in dye-sensitized solar cell Nan H, Han JH, Luo Q, Yin XW, Zhou Y, Yao ZB, Zhao XC, Li X, Lin H |
233 - 244 |
Improving the tribological and corrosive properties of MoS2-based coatings by dual-doping and multilayer construction Shang KD, Zheng SX, Ren SM, Pu JB, He DQ, Liu S |
245 - 256 |
Surface conjugation of poly (dimethyl siloxane) with itaconic acid-based materials for antibacterial effects Birajdar MS, Cho H, Seo Y, Choi J, Park H |
257 - 270 |
Complex fine-scale diffusion coating formed at low temperature on high-speed steel substrate Chaus AS, Pokorny P, Caplovic E, Sitkevich MV, Peterka J |
271 - 280 |
Solvent-induced synthesis of nitrogen-doped hollow carbon spheres with tunable surface morphology for supercapacitors Liu F, Yuan RL, Zhang N, Ke CC, Ma SX, Zhang RL, Liu L |
281 - 286 |
Influence of the growth parameters on the electronic and magnetic properties of La0.67Sr0.33MnO3 epitaxial thin films Annese E, Mori TJA, Schio P, Rache Salles B, Cezar JC |
287 - 293 |
Surface scaling analysis of textured MgO thin films fabricated by energetic particle self-assisted deposition Feng F, Zhang XS, Qu TM, Liu BB, Huang JL, Li J, Xiao SZ, Han ZH, Feng PF |
294 - 303 |
Chitosan-rectorite nanospheres embedded aminated polyacrylonitrile nanofibers via shoulder-to-shoulder electrospinning and electrospraying for enhanced heavy metal removal Huang MT, Tu H, Chen JJ, Liu R, Liang ZY, Jiang LB, Shi XW, Du YM, Deng HB |
304 - 313 |
Metal organic frameworks-derived sensing material of SnO2/NiO composites for detection of triethylamine Bai SL, Liu CY, Luo RX, Chen AF |
314 - 320 |
The functionalization effect of benzoic acid and anisole on the photocatalytic activity of monolayer MoS2 Suo YL, Liu HX, Huang SP, Zhang YF, Ding KN |
321 - 328 |
Mechanical performance and thermal stability of glass fiber reinforced silica aerogel composites based on co-precursor method by freeze drying Zhou T, Cheng XD, Pan YL, Li CC, Gong LL, Zhang HP |
329 - 335 |
Contact angle control of sessile drops on a tensioned web Park J, Kim D, Lee C |
336 - 346 |
Ferromagnetic MnCoGe thin films produced via magnetron sputtering and non-diffusive reaction Portavoce A, Assaf E, Alvarez C, Bertoglio M, Clerac R, Hoummada K, Alfonso C, Charai A, Pilone O, Hahn K, Dolocan V, Bertaina S |
347 - 356 |
Surface characterization of low-temperature grown yttrium oxide Krawczyk M, Lisowski W, Pisarek M, Nikiforow K, Jablonski A |
357 - 365 |
Evaluation of physico-mechanical properties in NHDF and HeLa cell with treatment of graphene quantum dots using atomic force microscopy Jeon SB, Yi SW, Samal M, Park KH, Yun K |
366 - 374 |
Analytical and molecular dynamics studies on the impact loading of single-layered graphene sheet by fullerene Hosseini-Hashemi S, Sepahi-Boroujeni A, Sepahi-Boroujeni S |
375 - 383 |
One-pot hydrothermal synthesis of ZnS quantum dots/graphene hybrids as a dual anode for sodium ion and lithium ion batteries Zhang RP, Wang Y, Jia MQ, Xu JJ, Pan EZ |
384 - 389 |
Two-dimensional MoS2-graphene hybrid nanosheets for high gravimetric and volumetric lithium storage Deng YK, Ding LX, Liu QX, Zhan L, Wang YL, Yang SB |
390 - 399 |
Effect of Co addition on the performance and structure of V/ZrCe catalyst for simultaneous removal of NO and Hg-0 in simulated flue gas Zhao LK, Li CT, Du XY, Zeng GM, Gao L, Zhai YB, Wang T, Zhang JY |
400 - 409 |
Mechanically durable underwater superoleophobic surfaces based on hydrophilic bulk metals for oil/water separation Yu HD, Lian ZX, Xu JK, Wan YL, Wang ZB, Li YQ, Yu ZJ, Weng ZK |
410 - 417 |
The optical properties of transferred graphene and the dielectrics grown on it obtained by ellipsometry Kasikov A, Kahro T, Matisen L, Kodu M, Tarre A, Seemen H, Alles H |
418 - 428 |
Pulsed laser deposition of SmFeAsO1-delta MgO(100) substrates Haindl S, Kinjo H, Hanzawa K, Hiramatsu H, Hosono H |
429 - 440 |
Electrical properties of multilayer (DLC-TiC) films produced by pulsed laser deposition Alawajji RA, Kannarpady GK, Nima ZA, Kelly N, Watanabe F, Biris AS |
441 - 450 |
Synthesis and characterization of TiO2/graphitic carbon nanocomposites with enhanced photocatalytic performance Wanag A, Kusiak-Nejman E, Kowalczyk L, Kapica-Kozar J, Ohtani B, Morawski AW |
451 - 452 |
Synthesis of hydroxyapatite/multi-walled carbon nanotubes for the removal of fluoride ions from solution (vol 412, pg 578, 2017) Ruan ZY, Tian YX, Ruan JF, Cui GJ, Iqbal K, Iqbal A, Ye HR, Yang ZZ, Yan SQ |
453 - 453 |
Effect of iron content on the structure and mechanical properties of Al25Ti25Ni25Cu25 and (AlTi)(60-x)Ni20Cu20Fex (x = 15, 20) high-entropy alloys (vol 358, pg 549, 2015) Fazakas E, Zadorozhnyy V, Louzguine-Luzgin DV |