1 - 5 |
Mechanical properties of the plasma-enhanced magnetron sputtering Si-C-N coatings Wang YF, Li ZX, Du JH, Wang BY |
6 - 9 |
Facile fabrication of large-scale stable superhydrophobic surfaces with carbon sphere films by burning rapeseed oil Qu MN, He JM, Cao BY |
10 - 16 |
Correlation between microstructure, magnetic and electronic properties of Fe1-xAlx (0.2 <= x <= 0.6) alloys produced by arc melting Brajpuriya R, Sharma P, Jani S, Kaimal S, Shripathi T, Lakshmi N, Venugopalan K |
17 - 21 |
Low-temperature deposition of stoichiometric HfO2 on silicon: Analysis and quantification of the HfO2/Si interface from electrical and XPS measurements Rudenja S, Minko A, Buchanan DA |
22 - 24 |
Laser processing of poly(methyl methacrylate) Lambertian diffusers Bubb DM, Yi SY, Kuchmek J, Corgan J, Papantonakis M |
25 - 32 |
On the temperature dependence of Na migration in thin SiO2 films during ToF-SIMS O-2(+) depth profiling Krivec S, Detzel T, Buchmayr M, Hutter H |
33 - 36 |
Facile approach in fabricating superhydrophobic coatings from silica-based nanocomposite Guo YG, Wang QH |
37 - 41 |
Nanoscratch study of Zn1-xMnxO heteroepitaxial layers Chang YM, Chang ZC, Lian DM, Yang CS, Yau WH, Tsai CH, Wu WF, Chou CP |
42 - 47 |
Ni-Co-TiO2 nanocomposite coating prepared by pulse and pulse reversal methods using acetate bath Ranjith B, Kalaignan GP |
48 - 55 |
Adhesion experiments using an AFM-Parameters of influence Ferreira OD, Gelinck E, de Graaf D, Fischer H |
56 - 61 |
The pH effect on black spots in surface finish: Electroless nickel immersion gold Won YS, Park SS, Lee J, Kim JY, Lee SJ |
62 - 66 |
Cross-sectional characterization of cupric oxide nanowires grown by thermal oxidation of copper foils Liang JB, Kishi N, Soga T, Jimbo T |
67 - 71 |
Electrical, structural and surface morphological properties of thermally stable low-resistance W/Ti/Au multilayer ohmic contacts to n-type GaN Jyothi I, Reddy VR |
72 - 81 |
Dry sliding tribological behavior of AZ31 magnesium alloy irradiated by high-intensity pulsed ion beam Li P, Lei MK, Zhu XP |
82 - 86 |
Oxidation of graphene on Ru(0001) studied by scanning tunneling microscopy Liao Q, Zhang HJ, Wu K, Li HY, Bao SN, He P |
87 - 92 |
Crack-free micromachining on glass substrates by visible LIBWE using liquid metallic absorbers Yen MH, Huang CW, Hsu WC, Young TH, Zimmer K, Cheng JY |
93 - 101 |
Influence of deposition temperature on morphological, optical, electrical and opto-electrical properties of highly textured nano-crystalline spray deposited CdO:Ga thin films Moholkar AV, Agawane GL, Sim KU, Kwon YB, Rajpure KY, Kim JH |
102 - 108 |
Bismuth onion thin film in situ grown on silicon wafer synthesized through a hydrothermal approach Zhao Y, Liu H, Liu J, Hu CG, Wang JY |
109 - 115 |
Effect of composition and deposition temperature on the characteristics of Ga doped ZnO thin films Kim YH, Jeong J, Lee KS, Cheong B, Seong TY, Kim WM |
116 - 121 |
ZnO/MoO3 mixed oxide nanotube: A highly efficient and stable catalyst for degradation of dye by air under room conditions Huang JG, Wang XH, Li S, Wang Y |
122 - 126 |
Effect of [Zn]/[S] ratios on the properties of chemical bath deposited zinc sulfide thin films Li ZQ, Shi JH, Liu QQ, Wang ZA, Sun Z, Huang SM |
127 - 131 |
Surface and catalytic properties of doped tin oxide nanoparticles Wang CT, Lai DL, Chen MT |
132 - 137 |
Microwave-assistant synthesis of ordered CuO micro-structures on Cu substrate Min YL, Wang T, Chen YC |
138 - 142 |
Preparation of poly(3-hexylthiophene)/graphene nanocomposite via in situ reduction of modified graphite oxide sheets Yang ZL, Shi XJ, Yuan JJ, Pu HT, Liu YS |
143 - 150 |
Effect of titanium incorporation on the structural, mechanical and biocompatible properties of DLC thin films prepared by reactive-biased target ion beam deposition method Bharathy PV, Nataraj D, Chu PK, Wang HY, Yang Q, Kiran MSRN, Silvestre-Albero J, Mangalaraj D |
151 - 156 |
Surface modification of nanocrystalline anatase with CTAB in the acidic condition and its effects on photocatalytic activity and preferential growth of TiO2 Qu YC, Wang WX, Jing LQ, Song S, Shi X, Xue LP, Fu HG |
157 - 159 |
Laser-induced voltage characteristics of Bi2Sr2Co2Oy thin films on LaAlO3 substrates Wang SF, Cheng JC, Zhao XH, Zhao SQ, He LP, Chen MJ, Yu W, Wang JL, Fu GS |
160 - 164 |
Structural, optical and electrical properties of Al-N codoped ZnO films by RF-assisted MOCVD method Su JF, Zang CH, Cheng CX, Niu QA, Zhang YS, Yu K |
165 - 171 |
Patterning of polypyrrole using a fluoropolymer as an adsorption-protecting molecule Kwon S, Ha JW, Noh J, Lee SY |
172 - 175 |
Preparation, electronic structure, and photocatalytic properties of Bi2O2CO3 nanosheet Liu YY, Wang ZY, Huang BB, Yang KS, Zhang XY, Qin XY, Dai Y |
176 - 179 |
Influence of citric acid on the morphology and magnetic properties of barium ferrite thin films Zhang WL, Tang H, Peng B, Zhang WX |
180 - 185 |
XPS and IGC characterization of steam treated triticale straw Zhao LY, Boluk Y |
186 - 191 |
Structural properties of the titanium dioxide thin films grown by atomic layer deposition at various numbers of reaction cycles Alekhin AP, Gudkova SA, Markeev AM, Mitiaev AS, Sigarev AA, Toknova VF |
192 - 196 |
Novel catalysts: Indium implanted SiO2 thin films Yoshimura S, Hine K, Kiuchi M, Nishimoto Y, Yasuda M, Baba A, Hamaguchi S |
197 - 202 |
Fabrication of porous BaSnO3 hollow architectures using BaCO3@SnO2 core-shell nanorods as precursors Li BH, Tang YW, Luo LJ, Xiao T, Li DW, Hu XY, Yuan M |
203 - 209 |
Effect of arc spraying power on the microstructure and mechanical properties of Zn-Al coating deposited onto carbon fiber reinforced epoxy composites Wang RG, Song DJ, Liu WB, He XD |
210 - 214 |
Resonant soft X-ray reflectivity as a sensitive probe to investigate polished zinc sulphide surface Gupta P, Sinha AK, Modi MH, Gupta SM, Gupta PK, Deb SK |
215 - 221 |
Effect of argon ion activity on the properties of Y2O3 thin films deposited by low pressure PACVD Barve SA, Jagannath, Deo MN, Kishore R, Biswas A, Gantayet LM, Patil DS |
222 - 226 |
Oxidation studies of niobium thin films at room temperature by X-ray reflectivity Sokhey KJS, Rai SK, Lodha GS |
227 - 231 |
Preparation, characterization and photocatalytic activity of the neodymium-doped TiO2 hollow spheres Wang C, Ao YH, Wang PF, Hou J, Qian J |
232 - 238 |
Deposition of quasi-crystal Al-doped ZnO thin films for photovoltaic device applications Yang YY, Zeng XB, Zeng Y, Liu L, Chen QK |
239 - 243 |
Characteristic difference between ITO/ZrCu and ITO/Ag bi-layer films as transparent electrodes deposited on PET substrate Lee CJ, Lin HK, Sun SY, Huang JC |
244 - 248 |
Structure and elastic recovery of Cr-C:H films deposited by a reactive magnetron sputtering technique Dai W, Wu GS, Wang AY |
249 - 253 |
Modeling effects of abrasive particle size and concentration on material removal at molecular scale in chemical mechanical polishing Wang YG, Zhao YW, An W, Ni ZF, Wang J |
254 - 260 |
Preparation of functional composite grafted particles PDMAEMA/SiO2 and preliminarily study on functionality Gao BJ, Chen YX, Zhang ZG |
261 - 265 |
Investigation of surface properties of liquid transition metals: Surface tension and surface entropy Korkmaz SD, Korkmaz S |
266 - 270 |
Capabilities of using white x-rays for the reconstruction of surface morphology from coherent reflectivity Sant T, Panzner T, Pietsch U |
271 - 275 |
The 60 degrees or 180 degrees twinned Bi-doped PbTe film studied by EBSD Ren SY, Yang YK, Li HD, Li DM, Lv XY, Zhu PW |
276 - 281 |
Surface characterization by nitrogen adsorption of silica aerogels synthesized from various Si(OR)(4) and R'' Si(OR')(3) precursors Al-Oweini R, El-Rassy H |
282 - 289 |
Adsorption of oxygen molecular on pristine and defected SiC nanotubes Liang RL, Zhang Y, Zhang JM |
290 - 295 |
Modification of unsaturated polyester resins (UP) and reinforced UP resins via plasma treatment Li GL, Wei X, Wang WJ, He T, Li XM |
296 - 301 |
Fabrication of titanium dioxide nanofibers containing hydroxyapatite nanoparticles Sheikh FA, Kanjwal MA, Kim HY, Kim H |
302 - 305 |
Synthesis and photoluminescence properties of aqueous CdWO4 quantum dots with WO66- luminescence center Zhang GX, Yang SF, Li Z, Zhang L, Zhou W, Zhang HY, Shen H, Wang YX |
306 - 311 |
Fabrication and properties of film-under-gate field emission arrays with SnO2 emitters for flat lamp Zhang YA, Lin JY, Guo TL |
312 - 318 |
Synthesis and surface activity properties of alkylphenol polyoxyethylene nonionic trimeric surfactants Yang F, Li G, Qi J, Zhang SM, Liu R |
319 - 324 |
In situ ellipsometric study of surface immobilization of flagellar filaments Kurunczi S, Nemeth A, Hulber T, Kozma P, Petrik P, Jankovics H, Sebestyen A, Vonderviszt F, Fried M, Barsony I |
325 - 331 |
Air plasma or UV-irradiation applied to surface modification of pectin/poly(vinyl alcohol) blends Kowalonek J, Kaczmarek H, Dabrowska A |