2 - 6 |
Wafer-level fabrication and optical characterization of nanoscale patterned sapphire substrates Lin YS, Hsu WC, Huang KC, Yeh JA |
7 - 12 |
In situ ellipsometry study of atomic hydrogen etching of extreme ultraviolet induced carbon layers Chen JQ, Louis E, Harmsen R, Tsarfati T, Wormeester H, van Kampen M, van Schaik W, van de Kruijs R, Bijkerk F |
13 - 18 |
Structural and morphological dependence of carbon nanotube arrays on catalyst aggregation Di JT, Yong ZZ, Yang XJ, Li QW |
19 - 23 |
Correlation between interfacial defects and ferromagnetism of BaTiO3 nanocrystals studied by positron annihilation Chen ZY, Chen ZQ, Wang DD, Wang SJ |
24 - 29 |
Synthesis and surface properties of submicron barium sulfate particles Zhang M, Zhang B, Li XH, Yin ZL, Guo XY |
30 - 33 |
Optical property investigation of SiGe nanocrystals formed by electrochemical anodization Pan SW, Zhou B, Chen SY, Li C, Huang W, Lai HK |
34 - 37 |
Preparation and characterization of upconversion luminescent LaF3:Yb3+,Er3+/LaF3 core/shell nanocrystals Qu YQ, Li MC, Zhang LY, Zhao LC |
38 - 43 |
The preparation of c-axis epitaxial Bi-2212 films on STO(100) by sol-gel method Yu XM, Yang HZ, Qi Y |
44 - 49 |
Self-assembled MnS flower-like hierarchical architectures on porous alumina membrane Wang ZJ, Tao F, Pan F, Sun YF, Cai WL, Yao LZ |
50 - 57 |
Preparation of honeycomb porous La0.6Sr0.4Co0.2Fe0.8O3-delta-Gd0.2Ce0.8O2-delta composite cathodes by breath figures method for solid oxide fuel cells Zhang NQ, Li J, Ni D, Sun KN |
58 - 63 |
Electrochemical behavior of amino-modified multi-walled carbon nanotubes coordinated with cobalt porphyrin for the oxidation of nitric oxide Yan Y, Yao PP, Mu Q, Wang L, Mu J, Li XQ, Kang SZ |
64 - 67 |
Structure and magnetism of Zn0.9Co0.1O DMS films prepared by chemical solution deposition method Yang JH, Cheng Y, Zhang YJ, Wang YX, Liu Y |
68 - 75 |
Formation of arsenic sulfide on GaAs surface under illumination in acidified thiourea electrolytes Khader MM, AlJaber AS |
76 - 80 |
The effect of pre-pattern on the morphology and growth speed of TiO2 nanotube Xu T, Lin J, Chen JF, Chen XF |
81 - 88 |
Constituted oxides/nitrides on nitriding 304, 430 and 17-4 PH stainless steel in salt baths over the temperature range 723 to 923 K Shih TS, Huang YS, Chen CF |
89 - 92 |
Preparation of nanowall Bi2S3 films by chemical bath deposition Gao C, Shen HL, Sun L |
93 - 97 |
Synthesis and optical properties of ZnO nanorods on indium tin oxide substrate Zheng JH, Jiang Q, Lian JS |
98 - 102 |
Surface modification of PMMA/O-MMT composite microfibers by TiO2 coating Wang QQ, Wang X, Li XJ, Cai YB, Wei QF |
103 - 112 |
Influence of Ni deposition and subsequent N+ ion implantation at different substrate temperatures on nano-structure and corrosion behaviour of type 316 and 304 stainless steels Savaloni H, Habibi M |
113 - 119 |
Tribological behavior of micro/nano-patterned surfaces in contact with AFM colloidal probe Zhang XL, Wang X, Kong W, Yi GW, Jia JH |
120 - 125 |
A comparative study of solution based CIGS thin film growth on different glass substrates Park SJ, Lee E, Jeon HS, Ahn SJ, Oh MK, Min BK |
126 - 135 |
Enhancement of hydrophobicity and tensile strength of muga silk fiber by radiofrequency Ar plasma discharge Gogoi D, Choudhury AJ, Chutia J, Pal AR, Dass NN, Devi D, Patil DS |
136 - 142 |
Effect of cross-linkable polymer on the morphology and properties of transparent multi-walled carbon nanotube conductive films Huang YL, Tien HW, Ma CCM, Teng CC, Yu YH, Yang SY, Wei MH, Wu SY |
143 - 146 |
Ultraviolet photoelectron spectroscopy of nano In clusters Schottky barriers on sputtered InP Kumar S, Mukherjee C, Dixit VK, Singh SD, Jha SN |
147 - 150 |
Investigation of the surface properties of gold nanowire arrays Yao HJ, Mo D, Duan JL, Chen YH, Liu J, Sun YM, Hou MD, Schapers T |
151 - 157 |
Structural and optical properties of Au-implanted ZnO films Zhang XD, Wu P, Shen YY, Zhang LH, Xue YH, Zhu F, Zhang DC, Liu CL |
158 - 162 |
Optically transparent, superhydrophobic methyltrimethoxysilane based silica coatings without silylating reagent Kavale MS, Mahadik DB, Parale VG, Wagh PB, Gupta SC, Rao AV, Barshilia HC |
163 - 168 |
A facile strategy for the fabrication of uniform CdS nanowires with high yield and its controlled morphological growth with the assistance of PEG in hydrothermal route Pal K, Maiti UN, Majumder TP, Debnath SC |
169 - 175 |
KrF laser ablation of a polyethersulfone film: Effect of pulse duration on structure formation Pazokian H, Selimis A, Stratakis E, Mollabashi M, Barzin J, Jelvani S |
176 - 181 |
Ion-induced secondary electron emission from ZnS thin films deposited by closed-spaced sublimation Ashraf M, Ullah S, Hussain S, Dogar AH, Qayyum A |
182 - 188 |
Enhanced photocatalytic activity and stability of nano-scaled TiO2 co-doped with N and Fe Hu SZ, Li FY, Fan ZP, Chang CC |
189 - 195 |
Template-free synthesis of ZnV2O4 hollow spheres and their application for organic dye removal Duan F, Dong WF, Shi DJ, Chen MQ |
196 - 200 |
The research and preparation of a novel nano biodegradable polymer external reinforcement Zhang XM, Chen B, Fu WG, Fang ZD, Liu ZJ, Lu WF, Shi ZY, Chen LL, Chen T |
201 - 206 |
Formation of CuO nanowires by thermal annealing copper film deposited on Ti/Si substrate Wang Y, Shen RQ, Jin XY, Zhu P, Ye YH, Hu Y |
207 - 211 |
Quenching influence of cell culture medium on photoluminescence and morphological structure of porous silicon Unal B |
212 - 217 |
Facile preparation of Au/Ag bimetallic hollow nanospheres and its application in surface-enhanced Raman scattering Yi Z, Xu XB, Li XB, Luo JS, Wu WD, Tang YJ, Yi YG |
218 - 224 |
The synthesis and characterization of Ti/SnO2-Sb2O3/PbO2 electrodes: The influence of morphology caused by different electrochemical deposition time An H, Li Q, Tao DJ, Cui H, Xu XT, Ding L, Sun L, Zhai JP |
225 - 229 |
Energy barriers for trimethylaluminum reaction with varying surface hydroxyl density Kim DH, Baek SB, Kim YC |
230 - 235 |
Peptide-induced patterning of gold nanoparticle thin films Borteh HM, Ferrell NJ, Butler RT, Olesik SV, Hansford DJ |
236 - 241 |
The effect of surfactants on the magnetic and optical properties of Co-doped SnO2 nanoparticles Jiang H, Liu XF, Zou ZY, Wu ZB, He B, Yu RH |
242 - 246 |
Microstructure and mechanical properties of CrN films fabricated by high power pulsed magnetron discharge plasma immersion ion implantation and deposition Wu ZZ, Tian XB, Wang ZM, Gong CZ, Yang SQ, Tan CM, Chu PK |
247 - 253 |
Photocatalytic mineralization study of malachite green on the surface of Mn-doped BiOCl activated by visible light under ambient condition Pare B, Sarwan B, Jonnalagadda SB |
254 - 259 |
Development of film sensors based on ZnO nanoparticles for amine gas detection Xia HY, Liu TH, Gao LN, Yan LK, Wu JW |
260 - 264 |
ZnO thin film characterization by X-ray reflectivity optimization using genetic algorithm and Fourier transformation Solookinejad G, Rozatian ASH, Habibi MH |
265 - 269 |
Preparation of nano/micro-scale column-like topography on PDMS surfaces via vapor deposition: Dependence on volatility solvents Wang L, Lin CG, Yang LH, Zhang JW, Zheng JY |
270 - 277 |
Structural and hydrophobic-hydrophilic properties of nanosilica/zirconia alone and with adsorbed PDMS Sulym IY, Borysenko MV, Goncharuk OV, Terpilowski K, Sternik D, Chibowski E, Gun'ko VM |
278 - 284 |
Structure and surface properties of praseodymium modified alumina Tankov I, Pawelec B, Arishtirova K, Damyanova S |
285 - 289 |
Fabrication of superhydrophobic polyaniline films with rapidly switchable wettability Zhou XY, Zhang ZZ, Men XH, Yang J, Xu XH, Zhu XT, Xue QJ |
290 - 296 |
Surface texturing of the carbon steel AISI 1045 using femtosecond laser in single pulse and scanning regime Stasic J, Gakovic B, Perrie W, Watkins K, Petrovic S, Trtica M |
297 - 303 |
The structure and mechanical properties of thick rutile-TiO2 films using different coating treatments Chuang LC, Luo CH, Yang SH |
304 - 311 |
Radio frequency plasma enhanced chemical vapor based ZnO thin film deposition on glass substrate: A novel approach towards antibacterial agent Panigrahi J, Behera D, Mohanty I, Subudhi U, Nayak BB, Acharya BS |
312 - 320 |
Mechanical and electrochemical characterization of vanadium nitride (VN) thin films Caicedo JC, Zambrano G, Aperador W, Escobar-Alarcon L, Camps E |
321 - 326 |
Investigation of the fill factor of dye-sensitized solar cell based on ZnO nanowire arrays Tian YS, Hu CG, Wu Q, Wu XH, Li XY, Hashim M |
327 - 332 |
Characterization of scandia doped pressed cathode fabricated by spray drying method Cui YT, Wang JS, Liu W, Wang YM, Zhou ML |
333 - 336 |
Growth and electron field emission of ZnO nanorods on diamond films Sang DD, Li HD, Cheng SH |
337 - 345 |
Organosilane modified silica/polydimethylsiloxane mixed matrix membranes for enhanced propylene/nitrogen separation Beltran AB, Nisola GM, Cho E, Lee EED, Chung WJ |
346 - 349 |
Electroluminescence with micro-watt output from ultra-small sized Si quantum dots/amorphous SiO2 multilayers prepared by laser crystallization method Xu W, Sun HC, Xu J, Li W, Mu WW, Liu Y, Yan MY, Huang XF, Chen KJ |
350 - 355 |
X-ray photoelectron spectroscopy analysis of (Ln(1-x)Sr(x)) CoO3-delta (Ln: Pr, Nd and Sm) Kim JH |
356 - 360 |
Effect of gas flow ratio on the microstructure and mechanical properties of boron phosphide films prepared by reactive magnetron sputtering Jia ZC, Zhu JQ, Jiang CZ, Shen WX, Han JC, Chen RR |
361 - 369 |
Adsorption of bovine serum albumin on amorphous carbon surfaces studied with dip pen nanolithography Yadav PK, McKavanagh F, Maguire PD, Lemoine P |
370 - 376 |
Ti-Cu-N hard nanocomposite films prepared by pulse biased arc ion plating Zhao YH, Wang XQ, Xiao JQ, Yu BH, Li FQ |
377 - 381 |
Molecule oxygen-driven shaping of gold islands under thermal annealing Yan CJ, Chen YC, Jin AZ, Wang M, Kong XD, Zhang XF, Ju Y, Han L |
382 - 387 |
Abrasive resistance of arc sprayed carbonitride alloying self-shielded coatings Deng Y, Yu SF, Xing SL, Huang LB, Lu Y |
388 - 393 |
Surface wettability of atmospheric dielectric barrier discharge processed Armos fibers Jia CX, Chen P, Wang Q, Li B, Chen MX |
394 - 398 |
Confocal Raman spectromicroscopy for tin-core/carbon-shell nanowire heterostructure Wang FP, Li RY, Sun XL, Ding ZF |
399 - 403 |
Structural and mechanical properties of multi-element (TiVCrZrHf)N coatings by reactive magnetron sputtering Liang SC, Tsai DC, Chang ZC, Sung HS, Lin YC, Yeh YJ, Deng MJ, Shieu FS |
404 - 407 |
Effect of Cr100-xTix (x=0-19 at.%) alloy underlayers on the high coercivity of FePt thin film below the substrate temperature of 250 degrees C Lee SH, Eun SH |
408 - 413 |
Adsorption and dissociation of O-2 on CuCl(111) surface: A density functional theory study Zhang RG, Liu HY, Wang BJ, Ren J, Li Z |
414 - 418 |
Synthesis and photochromic properties of 1,3-diaminopropane-induced MoO3 powder Shen Y, Huang R, Li Y, Yao SZ |
419 - 424 |
Electrical characteristics of insulating aluminum nitride MIS nanostructures Abdallah B, Al-Khawaja S, Alkhawwam A |
425 - 430 |
Biocompatibility of polypropylene non-woven fabric membrane via UV-induced graft polymerization of 2-acrylamido-2-methylpropane sulfonic acid Song LJ, Zhao J, Yang HW, Jin J, Li XM, Stagnaro P, Yin JH |
431 - 435 |
Physico-chemical properties of titania nanotubes synthesized via hydrothermal and annealing treatment Fen LB, Han TK, Nee NM, Ang BC, Johan MR |
436 - 441 |
Laser diffusion nitriding of Ti-6Al-4V for improving hardness and wear resistance Man HC, Bai M, Cheng FT |
442 - 447 |
A density functional study of atomic oxygen and water molecule adsorption on Ni(111) and chromium-substituted Ni(111) surfaces Das NK, Shoji T |
448 - 455 |
Sol-gel based alumina powders with catalytic applications Crisan M, Zaharescu M, Kumari VD, Subrahmanyam M, Crisan D, Dragan N, Raileanu M, Jitianu M, Rusu A, Sadanandam G, Reddy JK |
456 - 460 |
(Ti,Al,Si,C)N nanocomposite coatings synthesized by plasma-enhanced magnetron sputtering Wang YF, Li ZX, Du JH, Hua YF, Wang BY |
461 - 465 |
Enhancing photoresponse time of low cost Pd/ZnO nanorods prepared by thermal evaporation techniques for UV detection Abdulgafour HI, Hassan Z, Yam FK, AL-Heuseen K, Yusof Y |
466 - 473 |
Surface-initiated ATRP of 2-(methacryloyloxy)ethyl 2-(trimethylammonio)ethyl phosphate on Phynox Barthelemy B, Devillers S, Minet I, Delhalle J, Mekhalif Z |
474 - 477 |
Long range interactions between micro spheres and alloy surfaces in water changed by ion implantation Li J, Chen HS, Liu FB |
478 - 481 |
Fabrication and adhesion performance of gold conductive patterns on silicon substrate by laser sintering Cai ZX, Yung KC, Zeng XY |
482 - 488 |
Characterization of poly (3-methyl thiophene) thin films prepared by modified chemical bath deposition Kamat SV, Yadav JB, Puri V, Puri RK, Joo OS |
489 - 493 |
Surface modification of titanium membrane by chemical vapor deposition and its electrochemical self-cleaning Li XW, Li JX, Gao CY, Chang M |
494 - 500 |
Effect of substrate texture on the growth of hematite nanowires Srivastava H, Tiwari P, Srivastava AK, Rai S, Ganguli T, Deb SK |
501 - 506 |
Drastic change in shape of tetragonal TeO2 nanowires and their application to transparent chemical gas sensors Kim SS, Park JY, Choi SW, Na HG, Yang JC, Kwak DS, Nam HJ, Hwangbo CK, Kim HW |
507 - 512 |
Synthesis and characterization of rodlike liquid crystalline polyester/multi-walled carbon nanotubes and study of their thermal stability Hu WQ, Cui ZK, Jin J, Dong ZP, Li SW, Wang P, Ding W, Li R |
513 - 520 |
Effects of air dielectric barrier discharge plasma treatment time on surface properties of PBO fiber Wang Q, Chen P, Jia CX, Chen MX, Li B |
521 - 524 |
Laser sintering of Cu paste film printed on polyimide substrate Joo M, Lee B, Jeong S, Lee M |
525 - 529 |
The important role of Mn3+ in the room-temperature ferromagnetism of Mn-doped GaN films Hu B, Man BY, Yang C, Liu M, Chen CS, Gao XG, Xu SC, Wang CC, Sun ZC |
530 - 534 |
Effects of rapid thermal annealing on the structural properties of TiO2 nanotubes Lin JY, Chou YT, Shen JL, Yang MD, Wu CH, Chi GC, Chou WC, Ko CH |
535 - 541 |
Elevated temperature dry sliding wear behavior of nickel-based composite coating on austenitic stainless steel deposited by a novel central hollow laser cladding He XM, Liu XB, Wang MD, Yang MS, Shi SH, Fu GY, Chen SF |
542 - 546 |
The influence of growth temperatures on the characteristics of GaN nanowires Low LL, Yam FK, Beh KP, Hassan Z |
547 - 555 |
Enhanced antibacterial performance of hybrid semiconductor nanomaterials: ZnO/SnO2 nanocomposite thin films Talebian N, Nilforoushan MR, Zargar EB |
556 - 564 |
Seed-assisted growth of epitaxial ZnO nanorod arrays with self-organized periodicity and directional alignment Chen HG, Li ZW |
565 - 571 |
Preparation and ablation properties of ZrC-SiC coating for carbon/carbon composites by solid phase infiltration Li ZQ, Li HJ, Li W, Wang J, Zhang SY, Guo J |
572 - 579 |
Interface and its effect on the interlaminate shear strength of novel glass fiber/hyperbranched polysiloxane modified maleimide-triazine resin composites Liu P, Guan QB, Gu AJ, Liang GZ, Yuan L, Chang JF |
580 - 585 |
Novel strategy in increasing stability and corrosion resistance for super-hydrophobic coating on aluminum alloy surfaces Yin B, Fang L, Tang AQ, Huang QL, Hu J, Mao JH, Bai G, Bai H |
586 - 589 |
Ultrasound-assisted anodization of aluminum in oxalic acid Zhang R, Jiang KM, Zhu Y, Qi HY, Ding GQ |
590 - 598 |
Synthesis, characterization and comparison of sediment electro-codeposited nickel-micro and nano SiC composites Narasimman P, Pushpavanam M, Periasamy VM |
599 - 603 |
Cr-doping induced ferromagnetic behavior in antiferromagnetic EuTiO3 nanoparticles Wei T, Song QG, Zhou QJ, Li ZP, Qi XL, Liu WP, Guo YR, Liu JM |
604 - 607 |
Effects of post-deposition rapid thermal annealing on aluminum-doped ZnO thin films grown by atomic layer deposition Cheng YC |
608 - 613 |
EBSD and AFM observations of the microstructural changes induced by low temperature plasma carburising on AISI 316 Gallo SC, Dong HS |
614 - 617 |
Mechanical responses of Zn1-xMnxO epitaxial thin films Chang TR, Tsai CH |
618 - 626 |
Surface-initiated reverse atom transfer radical polymerization (SI-RATRP) for blood-compatible polyurethane substrates Lu CY, Zhou NL, Xu D, Tang YD, Jin SX, Wu Y, Shen J |
627 - 630 |
Identification of the reconstruction and bonding structure of SiC nanocrystal surface by infrared spectroscopy Fan JY, Li HX, Zhang N, Lu RF |
631 - 639 |
Characterization of passive film on 2205 duplex stainless steel in sodium thiosulphate solution Luo H, Dong CF, Xiao K, Li XG |