| 2661 - 2667 |
Interaction of bathocuproine with metals (Ca, Mg, Al, Ag, and Au) studied by density functional theory
Bhatt MD, Suzuki S, Sakurai T, Akimoto K |
| 2668 - 2671 |
Theoretical and experimental study on the electronic structure and optical absorption properties of P-doped TiO2
Xu L, Tang CQ, Qian J, Huang ZB |
| 2672 - 2679 |
A microscopy study of the effect of heat treatment on the structure and properties of anodised TiO2 nanotubes
Jaroenworaluck A, Regonini D, Bowen CR, Stevens R |
| 2680 - 2685 |
Room temperature soft chemical route for nanofibrous wurtzite ZnO thin film synthesis
Gurav KV, Fulari VJ, Patil UM, Lokhande CD, Joo OS |
| 2686 - 2690 |
Study on the adsorption of fluorescein on Ag(110) substrate
Qian HQ, Mao HY, Song F, Shi SQ, Zhang HJ, Li HY, He PM, Bao SN |
| 2691 - 2699 |
Generation and removal of pits during chemical mechanical polishing process for MgO single crystal substrate
Wang K, Li YZ, Kang RK, Guo DM |
| 2700 - 2704 |
Biomimetic Ca-P coating on pre-calcified Ti plates by electrodeposition method
Yang XD, Zhang B, Lu JA, Chen JY, Zhang XD, Gu ZW |
| 2705 - 2710 |
Interlayer effect on the characterization of the La-Cr-O coatings with post-sputtering annealing treatment
Ho WY, Hsu CH, Tsai MH, Yang YS, Wang DY |
| 2711 - 2718 |
The influence of gamma-irradiation on some physical properties of chlorophyll/PMMA films
Abdelrazek EM, El Damrawi G, Elashmawi IS, El-Shahawy A |
| 2719 - 2725 |
Raman microprobe spectroscopy measurements of residual stress distribution along blisters in Cr2O3 thin films
Kemdehoundja M, Grosseau-Poussard JL, Dinhut JF |
| 2726 - 2730 |
Deposition and properties of B-N codoped p-type ZnO thin films by RF magnetron sputtering
Sui YR, Yao B, Yang JH, Cui HF, Huang XM, Yang T, Gao LL, Deng R, Shen DZ |
| 2731 - 2734 |
Inter-diffusion of cobalt and silicon through an ultra thin aluminum oxide layer
El Asri T, Raissi M, Vizzini S, El Maachi A, Ameziane EL, d'Avitaya FA, Lazzari JL, Coudreau C, Oughaddou H, Aufray B, Kaddouri A |
| 2735 - 2741 |
Investigations of the interactions of CO2, O-3 and UV light with silver surfaces by in situ IRRAS/QCM and ex situ TOF-SIMS
Wiesinger R, Schreiner M, Kleber C |
| 2742 - 2749 |
Thermal stability of thiol and silane monolayers: A comparative study
Chandekar A, Sengupta SK, Whitten JE |
| 2750 - 2753 |
A novel sputtering oxidation coupling (SOC) method to fabricate VO2 thin film
Xu XF, Yin AY, Du XL, Wang JQ, Liu JD, He XF, Liu XX, Huan YL |
| 2754 - 2758 |
A one-pot method to prepare N-doped titania hollow spheres with high photocatalytic activity under visible light
Ao YH, Xu JJ, Zhang SH, Fu DG |
| 2759 - 2763 |
Surface-coated fly ash used as filler in biodegradable poly(vinyl alcohol) composite films: Part 1-The modification process
Nath DCD, Bandyopadhyay S, Gupta S, Yu A, Blackburn D, White C |
| 2764 - 2768 |
Enhanced field emission and patterned emitter device fabrication of metal-tetracyanoquinodimethane nanowires array
Zheng KB, Li XY, Mo XL, Chen GY, Wang ZD, Chen GR |
| 2769 - 2774 |
A novel continuous process for synthesis of carbon nanotubes using iron floating catalyst and MgO particles for CVD of methane in a fluidized bed reactor
Maghsoodi S, Khodadadi A, Mortazavi Y |
| 2775 - 2780 |
Applied validity of effortless method for design of sinusoidal surface microstructure
Jing XF, Wang JP, Jin YX, He HB, Shao JD, Fan ZX |
| 2781 - 2785 |
ZnO nanorods/plates on Si substrate grown by low-temperature hydrothermal reaction
Gao SY, Li HD, Yuan JJ, Li YA, Yang XX, Liu JW |
| 2786 - 2791 |
Influence of postdeposition annealing on structural properties and electrical characteristics of thin Tm2O3 and Tm2Ti2O7 dielectrics
Pan TM, Yen LC |
| 2792 - 2802 |
Surface characterization of polyethylene terephthalate/silica nanocomposites
Parvinzadeh M, Moradian S, Rashidi A, Yazdanshenas ME |
| 2803 - 2808 |
Application of clean laser transfer for porphyrin micropatterning
Kononenko TV, Nagovitsyn IA, Chudinova GK, Mihailescu IN |
| 2809 - 2817 |
Optical properties and electric conductivity of gold nanoparticle-containing, hydrogel-based thin layer composite films obtained by photopolymerization
Janovak L, Dekany I |
| 2818 - 2825 |
Ordered luminescent nanohybrid thin films of Eu(BA)(3)Phen nanoparticle in polystyrene matrix from diblock copolymer self-assembly
Wang C, Zhang YM, Pei XQ, Wang TM, Wang QH |
| 2826 - 2830 |
Solvothermal synthesis and characterization of sandwich-like graphene/ZnO nanocomposites
Wu JL, Shen XP, Jiang L, Wang K, Chen KM |
| 2831 - 2836 |
Structure, magnetic and electrical transport properties of cosputtered Fe0.5Ge0.5 nanocomposite films
Mi WB, Li P, Jiang EY, Bai HL |
| 2837 - 2840 |
Catalyst-free synthesis of novel brush-shaped ZnO particles by a simple oxidation in air
Lee GH, Song JH |
| 2841 - 2848 |
Adhesion of silver nanoparticles on the clay substrates; modeling and experiment
Tokarsky J, Capkova P, Rafaja D, Klemm V, Valaskova M, Kukutschova J, Tomasek V |
| 2849 - 2855 |
Influence of annealing conditions on the properties of reinforced silver-embedded silica matrix from the cheap silica source
Hilonga A, Kim JK, Sarawade PB, Kim HT |
| 2856 - 2858 |
The fabrication of Ag nanoflake arrays via self-assembly on the surface of an anodic aluminum oxide template
Li XM, Dong K, Tang LB, Wu YJ, Yang PZ, Zhang PX |
| 2859 - 2862 |
Preparation, characterization and photocatalytic performance of TiO2/CexZr1-xO2 toward the oxidation of gaseous benzene
Zhong JB, Ma D, He XY, Li JZ, Chen YQ |
| 2863 - 2875 |
Study on effect of dimples on friction of parallel surfaces under different sliding conditions
Meng FM, Zhou R, Davis T, Cao J, Wang QJ, Hua D, Liu J |
| 2876 - 2883 |
Effect of applied bias voltage on corrosion-resistance for TiC1-xNx and Ti1-xNbxC1-yNy coatings
Caicedo JC, Amaya C, Yate L, Aperador W, Zambrano G, Gomez ME, Alvarado-Rivera J, Munoz-Saldana J, Prieto P |
| 2884 - 2889 |
Effect of complexing agent on the photoelectrochemical properties of bath deposited CdS thin films
Patil SB, Singh AK |
| 2890 - 2897 |
An investigation of the internal temperature dependence of Pd-Pt cluster beam deposition: A molecular dynamics study
Chen CK, Chang SC |
| 2898 - 2902 |
Synthesis of ZnO-SnO2 composite oxides by CTAB-assisted co-precipitation and photocatalytic properties
Yang ZJ, Lv LL, Dai YL, Xv ZH, Qian D |
| 2903 - 2909 |
Synthesis of narrow band gap (V2O5)(x)-(TiO2)(1-x) nano-structured layers via micro arc oxidation
Bayati MR, Moshfegh AZ, Golestani-Fard F |
| 2910 - 2914 |
Optical and electrical properties of In-doped CdO thin films fabricated by pulse laser deposition
Zheng BJ, Lian JS, Zhao L, Jiang Q |
| 2915 - 2919 |
AFM analysis of bleaching effects on dental enamel microtopography
de Freitas ACP, Espejo LC, Botta SB, Teixeira FD, Luz MAAC, Garone-Netto N, Matos AB, Salvadori MCBS |
| 2920 - 2926 |
XRD and XPS characterization of mixed valence Mn3O4 hausmannite thin films prepared by chemical spray pyrolysis technique
Raj AME, Victoria SG, Jothy VB, Ravidhas C, Wollschlager J, Suendorf M, Neumann M, Jayachandran M, Sanjeeviraja C |
| 2927 - 2933 |
Effects of UV-irradiation on the thermo-mechanical properties of optical grade poly(methyl methacrylate)
Eve S, Mohr J |
| 2934 - 2938 |
Enhancing indium tin oxide (ITO) thin film adhesiveness using the coupling agent silane
Wu D, Liu JX, Wang Y |
| 2939 - 2943 |
The surface tension of liquid Cu-Fe-Sb alloys
Willner J, Siwiec G, Botor J |
| 2944 - 2947 |
Fabrication of Au thin film gratings by pulsed laser interference
Shin H, Yoo H, Lee M |
| 2948 - 2955 |
In situ preparation and fluorescence quenching properties of polythiophene/ZnO nanocrystals hybrids through atom-transfer radical polymerization and hydrolysis
Peng XM, Zhang L, Chen YW, Li F, Zhou WH |
| 2956 - 2960 |
Influence of heat treatment on tribological properties of electroless Ni-P and Ni-P-Al2O3 coatings on Al-Si casting alloy
Novak M, Vojtech D, Vitu T |
| 2961 - 2967 |
Batch study of arsenate (V) adsorption using Akadama mud: Effect of water mineralization
Chen RZ, Zhang ZY, Feng CP, Lei ZF, Li Y, Li M, Shimizu K, Sugiura N |
| 2968 - 2973 |
Exchange versus intercalation of n-dodecanethiol monolayers on copper in the presence of n-dodecaneselenol and vice versa
Fonder G, Delhalle J, Mekhalif Z |
| 2974 - 2978 |
A Monte Carlo simulation study of Nitrogen on LiF(001)
Sallabi AK, Dawoud JN, Jack DB |
| 2979 - 2987 |
Stabilization of Au nanoparticles prepared by laser ablation in chloroform with free-base porphyrin molecules
Siskova K, Pfleger J, Prochazka M |
| 2988 - 2994 |
Electrochemical behaviors of the magnesium alloy substrates in various pretreatment solutions
Zhu YP, Yu G, Hu BN, Lei XP, Yi HB, Zhang J |
| 2995 - 2999 |
A new example of the diffusion-limited aggregation: Ni-Cu film patterns
Kockar H, Bayirli M, Alper M |
| 3000 - 3005 |
Protein imprinted polymer using acryloyl-beta-cyclodextrin and acrylamide as monomers
Zhang W, Qin L, Chen RR, He XW, Li WY, Zhang YK |
