| 1081 - 1107 |
Gas-liquid direct-contact evaporation: A review
Ribeiro CP, Lage PLC |
| 1109 - 1113 |
Characterization of flow regimes in bubble columns through CCF analysis of pressure fluctuations
Wu JJ, Wang D, Li LH, Zhou JT |
| 1113 - 1117 |
Study on fluid flow states of hanging downcomer bottom-orifices
Li YM, Yu XM |
| 1117 - 1124 |
Fluidization of ultrafine particles in a bubbling fluidized bed with sound assistance
Guo QJ, Wang MH, Li Y, Yang CH |
| 1125 - 1133 |
CFD prediction of flow and homogenization in a stirred vessel: Part I vessel with one and two impellers
Kukukova A, Mostek M, Jahoda M, Machon V |
| 1134 - 1143 |
CFD prediction of flow and homogenization in a stirred vessel: Part II vessel with three and four impellers
Mostek M, Kukukova A, Jahoda M, Machon V |
| 1144 - 1150 |
Effect of thermal asymmetry on heat transfer in a laminar annular flow
Mitrovic J, Maletic B |
| 1151 - 1157 |
Separation of homogeneous azeotropic mixtures by pressure swing distillation - Analysis of the operation performance
Repke JU, Forner F, Klein A |
| 1158 - 1165 |
The influence of halide anions on the anodic behavior of nickel in borate solutions
El Aal EEA, El Haleem SMA |
| 1166 - 1176 |
A novel approach for the prediction of hydrocarbon thermal cracking product yields from the substitute feedstock composition
Belohlav Z, Zamostny P, Herink T, Eckert E, Vanek T |
| 1177 - 1181 |
Recrystallization of salicylamide using a batch supercritical antisolvent process
Su CS, Chen YP |
| 1182 - 1190 |
Investigation of energy loss mechanisms in cyclone separators
Liu CW, Wang LZ, Wang JJ, Liu QS |
| 1191 - 1200 |
Neural-networks-based feedback linearization versus model predictive control of continuous alcoholic fermentation process
Mjalli FS, Al-Asheh S |
| 1201 - 1211 |
Treatment of prehydrolysis liquor from a pulp mill using a biological route followed by reverse osmosis
Rath RL, Bhattacharjee C, Jain S, Bhattacharya PK |
| 1212 - 1225 |
Pyrolysis kinetics of wood and wood components
Willner T, Brunner G |
