| 2375 - 2380 |
Perspective - the need and prospects for negative emission technologies - direct air capture through the lens of current sorption process development
Realff MJ, Min YJ, Jones CW, Lively RP |
| 2381 - 2396 |
Economic-energy-exergy-risk (3ER) assessment of novel integrated ammonia synthesis process and modified sulfur-iodine cycle for co-production of ammonia and sulfuric acid
Park JK, Jeon JS, Um WY |
| 2397 - 2405 |
Cost and robustness analysis of the Korean government’s renewable energy plan under varying scenarios
Jang NJ, KimYJ, Lee DC, Yoon G, Yang JH, Cho IA, Jeon HL, Koo JM |
| 2406 - 2422 |
Data-driven fault detection for chemical processes using autoencoder with data augmentation
Lee HD, Kim CS, Jeong DH, Lee JM |
| 2423 - 2435 |
Three-dimensional numerical investigation on the effect of interconnect design on the performance of internal reforming planar solid oxide fuel cell
Hesami H, Borji M, Rezapour J |
| 2436 - 2445 |
Equilibrium and kinetic study of adsorption of diazinon from aqueous solutions by nano-polypropylene-titanium dioxide: Optimization of adsorption based on response surface methodology (RSM) and central composite design (CCD)
Barazandeh A, Jamali HA, Karyab H |
| 2446 - 2460 |
Fabrication and characterization of robust zirconia-kaolin hollow fiber membrane: Alkaline dissolution study in ammonia solution
Pauzan MAB, Hubadillah SK, Othman MHD, Ismail NJ, Puteh MH, Abdullah H, Bakar SA, Kadir SHSA, Yinn WK |
| 2461 - 2467 |
Speciation and mass distribution of mercury in a solid refuse fuels power plant
Lee ES, Lee SY, Cho SJ, Seo YC, Kim SH, Jang HN |
| 2468 - 2478 |
Highly efficient bi-metallic bismuth-silver doped TiO2 photocatalyst for dye degradation
Chakinala N, Gogate PR, Chakinala AG |
| 2479 - 2492 |
Preparation of eco-friendly wax-coated paper and its rheological and water-resistant characteristics
Lee EJ, Lim KH |
| 2493 - 2499 |
The effect of enzymatic hydrolysis of pretreated wastepaper for bioethanol production
Hossain N, Hoong LL, Barua P, Soudagar EM, Mahlia TMI |
| 2500 - 2509 |
Acceleration of microalgal biofilm formation on PET by surface engineering
Danaee S, Ofoghi H, Heydarian SM |
| 2510 - 2518 |
Purification of durene from the mixture of durene and isodurene by stripping crystallization
Shiau LD |
| 2519 - 2529 |
Tailoring hydrophobicity of polyethersulfone membrane support for levulinic acid extraction using supported liquid membrane process
Rajendaren V, Saufi SM, Zahari MAKM, Othman N, Sulaiman RNR |
| 2530 - 2535 |
Fabrication of transparent superhydrophobic polydimethylsiloxane elastomer by controlling the degree of combustion using thermal convection
Lee EJ, Kim DH |
| 2536 - 2540 |
Fabrication & characterization of novel conductive nanomaterial, CaxCr0.5-xMg0.5Fe2O4
Nosheen S, Iqbal SS, Bahadar A, Hossain N, Shahzad T |
| 2541 - 2548 |
Modification of a low-soda easy-sintered α-Al2O3 powder for the application in semiconductor/display production equipment
Sakthisabarimoorthi A, Kang MJ, Yoon DH |
| 2549 - 2559 |
Spectroscopic, microscopic and antibacterial studies of green synthesized Ag nanoparticles at room temperature using Psidium guajava leaf extract
Ghosh T, Chattopadhyay A, Mandal AC, Pramanik S, Mukherjee S, Kuiri PK |
| 2560 - 2566 |
Preparation of polyethylene terephthalate foams at different saturation temperatures using dual methods of supercritical batch foaming
Kwon DE, Aregay MG, Park BK, Lee YW |
| 2567 - 2573 |
Moisture-resistant and highly adhesive acrylate-based sealing materials embedded with oxime-based photoinitiators for hermetic optical devices
Son SR, An JI, Choi JW, Kim SY, Park JS, Park CB, Lee JH |
