725 - 731 |
Some physical properties and oxidative stability of biodiesel produced from oil seed crops Lateef FA, Onukwuli OD, Okoro UC, Ejikeme PM, Jere P |
732 - 743 |
Current trends for the floating liquefied natural gas (FLNG) technologies Won W, Lee SK, Choi K, Kwon Y |
744 - 747 |
Molecular interactions of graphene with HIV-Vpr, Nef and Gag proteins: A new approach for treating HIV infections Rathinam NK, Saravanan C, Parimal P, Perumal V, Perumal M |
748 - 753 |
Economic analysis of waste recycle process in perhydropolysiloxazane synthesis Yun H, Yeom S, Yang DR |
754 - 771 |
Power-law shear-thinning flow around a heated square bluff body under aiding buoyancy at low Reynolds numbers Sharma N, Dhiman A, Kumar S |
772 - 779 |
Predicting the velocity distribution of Rushton turbine impeller in mixing of polymeric liquids using fuzzy neural network models Aminian A, Jahangiri M |
780 - 784 |
Kinetic model of low temperature coal tar hydrocracking in supercritical gasoline for reducing coke production Chang N, Gu Z |
785 - 793 |
Electrochemical degradation of three reactive dyes using carbon paper cathode modified with carbon nanotubes and their simultaneous determination by partial least square method Djafarzadeh N, Safarpour M, Khataee A |
794 - 800 |
Study of SO2 oxidation over V2O5/activated carbon catalyst using in situ diffuse reflectance infrared Fourier transformation spectroscopy Jing W, Guo Q, Hou Y, Han X, Huang Z |
801 - 806 |
The effects of poly(ethylene glycol) on the low-temperature oxidation reaction of coal as monitored using in situ series diffuse reflectance FTIR Dou G, Xin H, Wang D, Qin B, Zhong X |
807 - 811 |
Effects of ultrasonic radiation on induction period and nucleation kinetics of sodium sulfate Zeng G, Li H, Luo S, Wang X, Chen J |
812 - 820 |
Enhanced Zn(II) uptake using zinc imprinted form of novel nanobiosorbent and its application as an antimicrobial agent Basak G, Das D, Das N |
821 - 827 |
Preparation and adsorption characters of Cu(II)-imprinted chitosan/attapulgite polymer Shi Y, Zhang Q, Feng L, Xiong Q, Chen J |
828 - 833 |
The effect of dominant ions on solvent extraction of lithium ion from aqueous solution Harvianto GR, Jeong SG, Ju CS |
834 - 840 |
Improved phenol adsorption from aqueous solution using electrically conducting adsorbents Asghar HMA, Hussain SN, Sattar H, Roberts EPL, Brown NW |
841 - 848 |
Structural and transport properties of polydimethylsiloxane based polyurethane/silica particles mixed matrix membranes for gas separation Semsarzadeh MA, Ghalei B, Fardi M, Esmaeeli M, Vakili E |
849 - 854 |
Quantitative analysis of the three main genera in effective microorganisms using qPCR Ahn K, Lee KB, Kim YJ, Koo YM |
855 - 860 |
Antimicrobial activity of electrospun polyurethane nanofibers containing composite materials Nirmala R, Kalpana D, Navamathavan R, Park M, Kim HY, Park SJ |
861 - 867 |
Enhancing lipid productivity of Chlorella vulgaris using oxidative stress by TiO2 nanoparticles Kang NK, Lee B, Choi GG, Moon M, Park MS, Lim JK, Yang JW |
868 - 874 |
Factorial design in optimization of the separation of uranium from yellowcake across a hollow fiber supported liquid membrane, with mass transport modeling Leepipatpaiboon N, Pancharoen U, Sunsandee N, Ramakul P |
875 - 880 |
Vapor-liquid equilibrium of ethanol/ethyl acetate mixture in ultrasonic intensified environment Mahdi T, Ahmad A, Ripin A, Nasef MM |
881 - 895 |
Volumetric, ultrasonic and viscometric studies of binary liquid mixures of N-ethylaniline + chlorobenzene, + Bromobeneze, + 1, 2-dichlorobenzene +1, 3-dichlorobenzene+1, 2, 4-trichlorobenzene at 303.15 and 308.15K Lakshmi BJ, Gowrisankar M, Rambabu C, Ramachandran D |
896 - 904 |
Preparation of atrazine surface-imprinted material MIP-PSSS/SiO2 and study on its molecule recognition character Li Y, Chen T, Gao B, Qiao Z |
905 - 910 |
Electrochemical properties of Co-less layered transition metal oxide as high energy cathode material for Li-ion batteries Choo S, Kim HY, Yoon DY, Choi W, Oh SH, Ju JB, Ko JM, Jang H, Cho WI |
911 - 917 |
Synthesis and characterization of cross-linked poly(acrylic acid)-poly(styrene-alt-maleic anhydride) core-shell microcapsule absorbents for cement mortar Hwang K, Ha K |