977 - 984 |
Application of Partial Least Squares Methods to a Terephthalic Acid Manufacturing Process for Product Quality Control Han IS, Kim M, Lee CH, Cha W, Ham BK, Jeong JH, Lee H, Chung CB, Han C |
985 - 991 |
Integrated Data Reconciliation with Generic Model Control for the Steel Pickling Process Kittisupakorn P, Kaewpradit P |
992 - 999 |
Risk Analysis Using Automatically Synthesized Robust Accident Scenarios and Consequence Assessment for Chemical Processes: Process Partition and Consequence Analysis Approach Kim KH, Shin D, Yoon ES |
1000 - 1011 |
Three-Way Data Analysis with Time Lagged Window for On-Line Batch Process Monitoring Chen J, Yen JH |
1012 - 1016 |
Determination of the Nusselt versus Graetz Correlation for Heat Transfer in Channels of Sinusoidal Cross-Section Phan C, Holgate DL, Griffin GJ |
1017 - 1022 |
Probability of Chain Growth in Coke Formation on Metals and on Supports during Catalytic Reforming over Pt, Pt-Sn and Pt-Sn-K Catalysts Mixed Physically with Al2O3 Srihiranpullop S, Praserthdam P |
1023 - 1025 |
Reaction Mechanism of Partial Oxidation of Methane to Synthesis Gas over Supported Ni Catalysts Kim SB, Kim YK, Lim YS, Kim MS, Hahm HS |
1026 - 1029 |
Photocatalytic Water Splitting over ZrO2 Prepared by Precipitation Method Reddy VR, Hwang DW, Lee JS |
1030 - 1036 |
Characterization of Zirconium Sulfate Supported on TiO2 and Activity for Acid Catalysis Sohn JR, Lee DG |
1037 - 1044 |
Operation Performance of a Pilot-Scale Gasification/Melting Process for Liquid and Slurry-Type Wastes Yun Y, Ju JS |
1045 - 1053 |
Reaction Pathways and Kinetic Modeling for Sonochemical Decomposition of Benzothiophene Kim IK, Yoa SJ, Lee JK, Huang CP |
1054 - 1065 |
Biofilter in Water and Wastewater Treatment Chaudhary DS, Vigneswaran S, Ngo HH, Shim WG, Moon H |
1066 - 1072 |
Adsorption Selectivity of Phenylalanine Imprinted Polymer Prepared by the Wet Phase Inversion Method Park JK, Kim SJ, Lee JW |
1073 - 1076 |
Caffeine Molecular Imprinted Microgel Spheres by Precipitation Polymerization Wang D, Hong SP, Yang G, Row KH |
1077 - 1078 |
Comments on the Paper “Simulation of the Aromatic Recovery Process by Extractive Distillation” (Ko, M., Na, S., Cho, J. and Kim, H.,Korean J. Chem. Eng., 19(6), (2002), 996-1000) Lei Z, Li C, Chen B |
1079 - 1084 |
The Effect of Humidity on the Durability of Inorganic Membranes Gu Y, Jeong BH, Sotowa KI, Kusakabe K |
1085 - 1091 |
13C NMR Analysis and Gas Uptake Measurements of Pure and Mixed Gas Hydrates: Development of Natural Gas Transport and Storage Method using Gas Hydrate Seo YT, Lee H |
1092 - 1096 |
Selective Recovery of Palladium from Used Aqua Regia by Hollow Fiber Supported with Liquid Membrane Weerawat P, Nattaphol V, Ura P |
1097 - 1102 |
A Unique Behavior of Sub-critical Hydrocarbon Permeability in Activated Carbon at Low Pressures Bae JS, Do DD |
1103 - 1110 |
Impact and Threshold Concentration of Toxic Materials in the Stripped Gas Liquor on Nitrification Kim SS, Kim HJ |
1111 - 1117 |
Parameters Determining the Agglomeration Behavior of Anhydrous L-ornithine-L-aspartate (LOLA) Crystals Prepared by Drowning Out Crystallization Kim Y, Haam S, Kim WS, Koo KK |
1118 - 1122 |
Filtration and Dust Cake Experiment by Ceramic Candle Filter in High Temperature Conditions Chung JD, Hwang TW, Park SJ |
1123 - 1130 |
Effects of High Temperature and Combustion on Fluidized Material Attrition in a Fluidized Bed Lin CL, Wey MY |
1131 - 1133 |
Thickness of a Modified Surface Layer Formed in a Silsesquioxane-based Low-k Material During Etching in a Fluorocarbon Plasma Hwang SW, Lee GR, Min JH, Moon SH |
1134 - 1137 |
Improvement of Electrical and Optical Properties of InGaN/GaN-Based Light-Emitting Diodes with Triangular Quantum Well Structure Choi RJ, Hahn YB, Shim HW, Suh EK, Hong CH, Lee HJ |
1138 - 1141 |
Nanometer-Sized Patterning of Polysilicon Thin Films by High Density Plasma Etching Using Cl2 and HBr Gases Song YS, Chung CW |
1142 - 1144 |
Synthesis of Mesoporous Alumina by using a Cost-effective Template Kim C, Kim Y, Kim P, Yi J |
1145 - 1148 |
Aspect Ratio Controlled Synthesis of Gold Nanorods Kang SK, Chah S, Yun CY, Yi J |
1149 - 1153 |
Characterization and Photocatalytic Performance of Nanosize TiO2 Powders Prepared by the Solvothermal Method Nam WS, Han GY |
1154 - 1157 |
Lonsdaleite Diamond Growth on Reconstructed Si (100) by Hot-Filament Chemical Vapor Deposition (HFCVD) Chiem CV, Seo HK, Ansari SG, Kim GS, Seo JM, Shin HS |
1158 - 1165 |
Surface Characterization of Biocompatible Polysulfone Membranes Modified with Poly(ethylene glycol) Derivatives Kim YW, Kim JJ, Kim YH |
1166 - 1169 |
Dynamic Characteristics of Bed Collapse in Three-Phase Fluidized Beds Lee DH, Park SS, Choi WW, Kim DJ, Kim JH, Lee YK, Sim SJ, Kim SD |
1170 - 1175 |
Drying Characteristics of Particles using Thermogravimetric Analyzer Park YS, Shin HN, Lee DH, Kim DJ, Kim JH, Lee YK, Sim SJ, Choi KB |
1176 - 1182 |
Synthesis and Characterization of Au/TiO2 Core-shell Structure Nanoparticles Yu YT, Mulvaney P |
1183 - 1187 |
Preparation and Characterization of Magnesium Diboride Superconductor by Melting Process Kim YS, Shin HS |