2873 - 2876 |
One-step synthesis of isoparaffin from synthesis gas using hybrid catalyst with supercritical butane Yoneyama Y, San XG, Iwai T, Tsubaki N |
2877 - 2884 |
Characterization of Cu-Mn/zeolite-Y catalyst for one-step synthesis of dimethyl ether from CO-H-2 Tang XJ, Fei JH, Hou ZY, Zheng XM, Lou H |
2885 - 2891 |
Influence of pH of the impregnation solution on the catalytic properties of Co/gamma-alumina for Fischer-Tropsch synthesis Bae JW, Lee YJ, Park JY, Jun KW |
2892 - 2901 |
Optimal hydrogen production through revamping a naphtha-reforming unit: Catalyst deactivation Tailleur RG, Davila Y |
2902 - 2908 |
Promoting effect of SO42- on desulfurization activity on Ni/supports for fluidized catalytic cracking (FCC) gasoline Wang WS, Guo HC, Liu HO, Wang XS |
2909 - 2916 |
Catalyst effect on the composition of tire pyrolysis products Olazar M, Aguado R, Arabiourrutia M, Lopez G, Barona A, Bilbao J |
2917 - 2924 |
Evolution of products generated during the dynamic pyrolysis of LDPE and HDPE over HZSM5 Marcilla A, Beltran MI, Navarro R |
2925 - 2932 |
Comparative study of hydrodemetallization (HDM) catalyst aging by boscan feed and Kuwait atmospheric residue Hauser A, Marafi A, Alrnutairi A, Stanislaus A |
2933 - 2940 |
Flame blowout limits of landfill gas mixed fuels in a swirling nonpremixed combustor Hwang CH, Lee CE, Kim JH |
2941 - 2947 |
Experimental investigation of the effect of electrodes on the ionization current during combustion Wu XM, Gao ZQ, Jiang DM, Huang ZH |
2948 - 2954 |
Viscosity of ashes from energy production and municipal solid waste handling: A comparative study between two different experimental setups Arvelakis S, Frandsen FJ, Folkedahl B, Hurley J |
2955 - 2962 |
Suspension combustion of wood: Influence of pyrolysis conditions on char yield, morphology, and reactivity Dall'Ora M, Jensen PA, Jensen AD |
2963 - 2971 |
Demonstration of compression-ignition engine combustion using ammonia in reducing greenhouse gas emissions Reiter AJ, Kong SC |
2972 - 2980 |
Combustion faults diagnosis in internal combustion engines using angular speed measurements and artificial neural networks Cruz-Peragon F, Jimenez-Espadafor FJ, Palomar JM, Dorado MP |
2981 - 2985 |
Combustion of a spark-ignition methanol engine during cold start under cycle-by-cycle control Gong CM, Deng BQ, Wang S, Su Y, Gao Q, Liu XJ |
2986 - 2990 |
Radicals from the gas-phase pyrolysis of hydroquinone: 1. Temperature dependence of the total radical yield Adounkpe J, Khachatryan L, Dellinger B |
2991 - 2996 |
Effects of an in-cylinder active thermo-atmosphere environment on diesel engine combustion characteristics and emissions Lu XC, Ji LB, Ma JJ, Huang C, Huang Z |
2997 - 3004 |
Influences of different operation conditions on the emission characteristics of O-2/recycled flue gas (RFG) waste incineration Chen JC, Huang HL, Huang HS |
3005 - 3015 |
Properties of particles in the fly ash of a biofuel-fired circulating fluidized bed (CFB) boiler Johansson LS, Leckner B, Tullin C, Amand LE, Davidsson K |
3016 - 3021 |
Generation of low-frequency alternative flame Behaviors in a lean premixed combustor Hong JG, Oh KC, Do Lee U, Shin HD |
3022 - 3028 |
Effects of combustion phasing, combustion duration, and their cyclic variations on spark-ignition (SI) engine efficiency Ma FH, Wang Y, Wang JJ, Ding SF, Wang YF, Zhao SL |
3029 - 3036 |
Application of a diode-laser-based ultraviolet absorption sensor for in situ measurements of atomic mercury in coal-combustion exhaust Magnuson JK, Anderson TN, Lucht RP, Vijayasarathy UA, Oh H, Annamalai K, Caton JA |
3037 - 3039 |
Quantitative structure-property relationship for prediction of the lower flammability limit of pure compounds Gharagheizi F |
3040 - 3049 |
Experiences in long-term evaluation of mercury emission monitoring systems Cheng CM, Lin HT, Wang Q, Chen CW, Wang CW, Liu MC, Chen CK, Pan WP |
3050 - 3056 |
Comparative study of CO2 capture by carbon nanotubes, activated carbons, and zeolites Lu CY, Bai HL, Wu BL, Su FS, Fen-Hwang J |
3057 - 3064 |
Diagnostic of novel atmospheric plasma source and its application to vitrification of waste incinerator fly ash Tu X, Wang Q, Yu L, Cheron B, Yan JH, Cen KF |
3065 - 3069 |
Oxidative desulfurization of thiophene catalyzed by (C4H9)(4)NBr center dot 2C(6)H(11)NO coordinated ionic liquid Zhao DS, Sun ZM, Li FT, Liu R, Shan HD |
3070 - 3079 |
In situ Fourier transform infrared (FTIR) investigation of CO2 adsorption onto zeolite materials Stevens RW, Siriwardane RV, Logan J |
3080 - 3088 |
Potential of alternative sorbents for desulphurization: From laboratory tests to the full-scale combustion unit Szeliga Z, Juchelkova D, Cech B, Kolat P, Winter F, Campen AJ, Wiltowski TS |
3089 - 3095 |
Gaseous mercury release during steam curing of aerated concretes that contain fly ash and activated carbon sorbent Golightly DW, Cheng CM, Sun P, Weavers LK, Walker HW, Taerakul P, Wolfe WE |
3096 - 3103 |
Interactions between asphaltenes and water in solutions in toluene Khvostichenko DS, Andersen SI |
3104 - 3111 |
Improved low-volatile bituminous coal representation: Incorporating the molecular-weight distribution Narkiewicz MR, Mathews JP |
3112 - 3117 |
Crude oil polar chemical composition derived from FT-ICR mass spectrometry accounts for asphaltene inhibitor specificity Smith DF, Klein GC, Yen AT, Squicciarini MP, Rodgers RP, Marshall AG |
3118 - 3125 |
Characterization of Athabasca bitumen heavy vacuum gas oil distillation cuts by negative/positive electrospray ionization and automated liquid injection field desorption ionization Fourier transform ion cyclotron resonance mass spectrometry Smith DF, Rahimi P, Teclemariam A, Rodgers RP, Marshall AG |
3126 - 3133 |
"Smart Water" for oil recovery from fractured limestone: A preliminary study Strand S, Austad T, Puntervold T, Hognesen EJ, Olsen M, Barstad SMF |
3134 - 3142 |
Characterization of the nonstable fraction of Hassi-Messaoud asphaltenes Daaou M, Modarressi A, Bendedouch D, Bouhadda Y, Krier G, Rogalski M |
3143 - 3149 |
Class of kinetic hydrate inhibitors with good biodegradability Del Villano L, Kommedal R, Kelland MA |
3150 - 3153 |
Investigation of interactions between gas hydrates and several other flow assurance elements Gao SQ |
3154 - 3159 |
Rheological evidence of the diffusionnal aggregation of asphaltenes in extra-heavy crude oils Meyer V, Pilliez J, Habas JP, Montel F, Creux P |
3160 - 3163 |
Swapping phenomena occurring in deep-sea gas hydrates Shin K, Park Y, Cha MJ, Park KP, Huh DG, Lee J, Kim SJ, Lee H |
3164 - 3173 |
Element contents and organic matter-element relationship of the Tertiary oil shale deposits in northwest Anatolia, Turkey Kara-Gulbay R, Korkmaz S |
3174 - 3193 |
X-ray diffraction (XRD)-derived processability markers for oil sands based on clay mineralogy and crystallite thickness distributions Mercier PHJ, Patarachao B, Kung J, Kingston DM, Woods JR, Sparks BD, Kotlyar LS, Ng S, Moran K, McCracken T |
3194 - 3200 |
Dewpoint pressure model for gas condensate reservoirs based on genetic programming Shokir EMEM |
3201 - 3212 |
Experimental and theoretical investigation of the effects of gasoline blends on single-cylinder diesel engine performance and exhaust emissions Sahin Z |
3213 - 3221 |
Effect of pyrolysis intensity on the reactivity of coal char Zhang SY, Lu JF, Zhang JS, Yue GX |
3222 - 3225 |
Effect of temperature on enhanced oil recovery from mixed-wet chalk cores by spontaneous imbibition and forced displacement using seawater Strand S, Puntervold T, Austad T |
3226 - 3236 |
Thermodynamic model of sediment deposition in the LC-FINING process Sundaram KM, Mukherjee U, Baldassari M |
3237 - 3248 |
Modeling the effect of shear stress on the composition and growth of the deposit layer from "Waxy" mixtures under laminar flow in a pipeline Bhat NV, Mehrotra AK |
3249 - 3257 |
Chemically authentic surrogate mixture model for the thermophysical properties of a coal-derived liquid fuel Huber ML, Lemmon EW, Diky V, Smith BL, Bruno TJ |
3258 - 3264 |
CO2 looping cycle performance of a high-purity limestone after thermal activation/doping Manovic V, Anthony EJ, Grasa G, Abanades JC |
3265 - 3274 |
Calibration of size-exclusion chromatography columns with 1-methyl-2-pyrrolidinone (NMP)/chloroform mixtures as eluent: Applications to petroleum-derived samples Berrueco C, Venditti S, Morgan TJ, Alvarez P, Millan M, Herod AA, Kandiyoti R |
3275 - 3292 |
Characterization of molecular mass ranges of two coal tar distillate fractions (creosote and anthracene oils) and aromatic standards by LD-MS, GC-MS, probe-MS and size-exclusion chromatography Morgan TJ, George A, Alvarez P, Millan M, Herod AA, Kandiyoti R |
3293 - 3298 |
Energy-savings modeling of oil pipelines that use drag-reducing additives Cuenca FG, Marin MG, Diaz MBF |
3299 - 3302 |
Highly efficient zirconium-catalyzed batch conversion of 1-butene: A new route to jet fuels Wright ME, Harvey BG, Quintana RL |
3303 - 3307 |
Removal of organic sulfur from hydrocarbon resources using ionic liquids Mochizuki Y, Sugawara K |
3308 - 3316 |
Shear and electrical property measurements of water-in-oil emulsions and implications for multiphase flow meters May EF, Graham BF, Chauhan AS, Trengove RD |
3317 - 3325 |
Investigating the formation mechanism of soot-like materials present in blast furnace coke samples Dong S, Alvarez P, Paterson N, Dugwell DR, Kandiyoti R |
3326 - 3328 |
Superoxides: Alternative oxidants for the oxidative desulfurization process Chan NY, Lin TY, Yen TF |
3329 - 3334 |
Development and characterization of expanded graphite-based nanocomposite as bipolar plate for polymer electrolyte membrane fuel cells (PEMFCs) Dhakate SR, Shanna S, Borah A, Mathur RB, Dhami TL |
3335 - 3345 |
Performance of a vapor-fed polybenzimidazole (PBI)-based direct methanol fuel cell Lobato J, Canizares P, Rodrigo MA, Linares JJ, Lopez-Vizcaino R |
3346 - 3350 |
Preparation and electrochemical characterization of PtRuO2-Ce0.5Pr0.5O2-(delta)/C catalysts for methanol electrooxidation Du W, Xie XY, Xu DX, Huang CD |
3351 - 3354 |
Performance of a polymer electrolyte membrane fuel cell with fabricated carbon fiber cloth electrode Liao YK, Ko TH, Liu CH |
3355 - 3362 |
Performance and combustion characteristics of a hydrogen-ethanol-fuelled engine Yousufuddin S, Mehdi SN, Masood M |
3363 - 3375 |
Effects of polymer modification on properties and microstructure of model asphalt systems Zhang LQ, Greenfield ML |
3376 - 3383 |
Carbon foams from different coals Calvo M, Garcia R, Moinelo SR |
3384 - 3389 |
Toward a direct measurement of paraffin adhesion forces Dotto MER, Ziglio CM, Camargo SS |
3390 - 3394 |
Ionic pairs in polyphosphoric acid (PPA)-modified bitumen: Insights from model compounds Masson JF, Gagne M |
3395 - 3401 |
Determination of three-dimensional solubility parameters and solubility spheres for naphthenic mineral oils Levin M, Redelius P |
3402 - 3406 |
Polyphosphoric acid (PPA)-modified bitumen: Disruption of the asphaltenes network based on the reaction of nonbasic nitrogen with PPA Masson JF, Gagne M |
3407 - 3419 |
Coke mineral transformations in the experimental blast furnace Kazuberns K, Gupta S, Grigore M, French D, Sakurovs R, Hallin M, Lindblom B, Sahajwalla V |
3420 - 3423 |
Pilot preparation of activated carbon for natural gas storage Dai XD, Liu XM, Qian L, Qiao K, Yan ZF |
3424 - 3434 |
Hydrogen sulfide viscosity modeling Schmidt KAG, Quinones-Cisneros SE, Carroll JJ, Kvamme B |
3435 - 3442 |
Dynamic determination of asphaltene aggregate size distribution in shear induced organic solvents Solaimany-Nazar AR, Rahimi H |
3443 - 3449 |
Simulation of a two-stroke free-piston engine for electrical power generation Li QF, Xiao J, Huang Z |
3450 - 3458 |
Evaluation of water content and average droplet size in water-in-crude oil emulsions by means of near-infrared spectroscopy Araujo AM, Santos LM, Fortuny M, Melo RLFV, Coutinho RCC, Santos AF |
3459 - 3464 |
Continuous butanol production using suspended and immobilized Clostridium beijerinckii NCIMB 8052 with supplementary butyrate Lee SM, Cho MO, Park CH, Chung YC, Kim JH, Sang BI, Um Y |
3465 - 3470 |
Slagging characteristics during combustion of corn stovers with and without kaolin and calcite Xiong SJ, Burvall J, Orberg H, Kalen G, Thyrel M, Ohman M, Bostrom D |
3471 - 3478 |
Enhanced conversion of cellulosic process residue into middle caloric fuel gas with Ca impregnation in fuel drying Xu GW, Murakami T, Suda T, Matsuzawa Y, Tani H, Mito Y |
3479 - 3483 |
Effect of weak acids as a catalyst on the transesterification of soybean oil in supercritical methanol Wang CW, Zhou JF, Chen W, Wang WG, Wu YX, Zhang JF, Chi RA, Ying WY |
3484 - 3488 |
One-step hydrogenation-esterification of aldehyde and acid to ester over bifunctional Pt catalysts: A model reaction as novel route for catalytic upgrading of fast pyrolysis bio-oil Tang Y, Yu WJ, Mo LY, Lou H, Zheng XM |
3489 - 3492 |
Upgrading of bio-oil over aluminum silicate in supercritical ethanol Peng J, Chen P, Lou H, Zheng XM |
3493 - 3498 |
Experimental investigation of biomass gasification in a fluidized bed reactor Chen HP, Li B, Yang HP, Yang GL, Zhang SH |
3499 - 3505 |
Experimental and modeling study of the kinetics of oxidation of ethanol-gasoline surrogate mixtures (E85 surrogate) in a jet-stirred reactor Dagaut P, Togbe C |
3506 - 3512 |
Review of energy balances and emissions associated with biomass-based transport fuels relevant to the United Kingdom context Patterson T, Dinsdale R, Esteves S |
3513 - 3516 |
Combustion of soya oil and diesel oil mixtures for use in thermal energy production Alonso JFSJ, Sastre JAL, Duque ER, Romero-Avila EJL, Romero-Avila C |
3517 - 3522 |
Direct conversion of sunflower shells to alkanes and aromatic compounds Guo SP, Wu LB, Wang C, Li JH, Yang ZY |
3523 - 3530 |
Investigation of biomasses and chars obtained from pyrolysis of different biomasses with solid-state C-13 and Na-23 nuclear magnetic resonance spectroscopy Link S, Arvelakis S, Spliethoff H, De Waard P, Samoson A |
3531 - 3535 |
Transesterification of palm oil with methanol to biodiesel over a KF/hydrotalcite solid catalyst Gao LJ, Xu B, Xiao GM, Lv JH |
3536 - 3543 |
Slagging characteristics during residential combustion of biomass pellets Gilbe C, Ohman M, Lindstrom E, Bostrom D, Backman R, Samuelsson R, Burvalll J |
3544 - 3550 |
CO2 splitting via two-step solar thermochemical cycles with Zn/ZnO and FeO/Fe3O4 redox reactions: Thermodynamic analysis Galvez ME, Loutzenhiser PG, Hischier I, Steinfeld A |
3551 - 3556 |
Transesterification of canola oil to fatty acid methyl ester (FAME) in a continuous flow liquid-liquid packed bed reactor Ataya F, Dube MA, Ternan M |
3557 - 3558 |
Comment on the "Role of SO2 for Elemental Mercury Removal from Coal Combustion Flue Gas by Activated Carbon" Granite EJ, Preston AA |
3559 - 3559 |
Characterization of heavy oils and bitumens. 1. Vapor pressure and critical constant prediction method for heavy hydrocarbons (vol 22, pg 455, 2008) Nji GN, Svreek WY, Yarranton HW, Satyro MA |
3560 - 3560 |
Brief review of the chemistry of polyphosphoric acid (PPA) and bitumen (vol 22, pg 2637 2008) Masson JF |