| 2347 - 2352 |
The random pore model with intraparticle diffusion for the description of combustion of char particles derived from mineral- and inertinite rich coal
Everson RC, Neomagus HWJP, Kaitano R |
| 2353 - 2358 |
Utilization of waste cockle shell (Anadara granosa) in biodiesel production from palm olein: Optimization using response surface methodology
Boey PL, Maniam GP, Hamid SA, Ali DMH |
| 2359 - 2366 |
Mechanistic investigation of chemical looping combustion of coal with Fe2O3 oxygen carrier
Wang BW, Yan R, Zheng Y, Zhao HB, Zheng CG |
| 2367 - 2376 |
Droplet size distribution and evaporation characteristics of fuel spray by a swirl type atomizer
Li T, Nishida K, Hiroyasu H |
| 2377 - 2383 |
The effects of leaching and floatation on the ash fusion temperatures of three selected lignites
Li FH, Huang JJ, Fang YT, Wang Y |
| 2384 - 2395 |
Diesel and rapeseed methyl ester (RME) pilot fuels for hydrogen and natural gas dual-fuel combustion in compression-ignition engines
Korakianitis T, Namasivayam AM, Crookes RJ |
| 2396 - 2403 |
Numerical modeling for non-steady thermal stress analysis of slag layer in a membrane wall entrained-flow gasifier
Lin WN, Liang QF, Yu GS, Liu HF, Gong X |
| 2404 - 2412 |
Co-gasification of coal and wood in a dual fluidized bed gasifier
Aigner I, Pfeifer C, Hofbauer H |
| 2413 - 2421 |
Dynamic behavior of particles across flame propagation through micro-iron dust cloud with thermal radiation effect
Haghiri A, Bidabadi M |
| 2422 - 2427 |
Titanium-doped alumina for catalytic dehydration of methanol to dimethyl ether at relatively low temperatures
Khaleel A |
| 2428 - 2444 |
Investigating the effect of sorption time on coalbed methane recovery through numerical simulation
Ziarani AS, Aguilera R, Clarkson CR |
| 2445 - 2453 |
Ammonium bisulfate formation temperature in a bench-scale single-channel air preheater
Menasha J, Dunn-Rankin D, Muzio L, Stallings J |
| 2454 - 2460 |
The effect of coal sulfur on the behavior of alkali metals during co-firing biomass and coal
Yang TH, Kai XP, Sun Y, He YG, Li RD |
| 2461 - 2466 |
Steam carbon gasification of a nickel based oxygen carrier
Chiron FX, Patience GS |
| 2467 - 2472 |
The influence of n-butanol/diesel fuel blends utilization on a small diesel engine performance and emissions
Dogan O |
| 2473 - 2479 |
Premium quality renewable diesel fuel by hydroprocessing of sunflower oil
Simacek P, Kubicka D, Kubickova I, Homola F, Pospisil M, Chudoba J |
| 2480 - 2490 |
On the formation and properties of asphaltene nanoaggregates and clusters by DC-conductivity and centrifugation
Goual L, Sedghi M, Zeng H, Mostowfi F, McFarlane R, Mullins OC |
| 2491 - 2500 |
Physical, chemical and mineralogical characterisation of hydraulically disposed fine coal ash from SASOL Synfuels
Mahlaba JS, Kearsley EP, Kruger RA |
| 2501 - 2507 |
A mechanism study of chloride and sulfate effects on Hg2+ reduction in sulfite solution
Liu Y, Wang YJ, Wu ZB, Zhou SY, Wang HQ |
| 2508 - 2513 |
Experimental study on the hazards of the jet diffusion flame of liquefied dimethyl ether
Mogi T, Shiina H, Wada Y, Dobashi R |
| 2514 - 2518 |
Performance, emission and combustion evaluation of soapnut oil-diesel blends in a compression ignition engine
Misra RD, Murthy MS |
| 2519 - 2529 |
Chemistry and radiation in oxy-fuel combustion: A computational fluid dynamics modeling study
Yin CG, Rosendahl LA, Kaer SK |
| 2530 - 2537 |
Simultaneous catalytic esterification of carboxylic acids and acetalisation of aldehydes in a fast pyrolysis bio-oil from mallee biomass
Li X, Gunawan R, Lievens C, Wang Y, Mourant D, Wang S, Wu HW, Garcia-Perez M, Li CZ |
| 2538 - 2544 |
Liquid fuel from castor seeds by pyrolysis
Singh RK, Shadangi KP |
| 2545 - 2552 |
Catalytic reforming of tar during gasification. Part II. Char as a catalyst or as a catalyst support for tar reforming
Min ZH, Yimsiri P, Asadullah M, Zhang S, Li CZ |
