내열성 에나멜 바니쉬

김양국; 배헌재

Journal of the Korean Industrial and Engineering Chemistry, Vol.4, No.2, 264-272, June, 1993

Export Citation

내열성 에나멜 바니쉬

Heat-resistant Enamel Varinish

김양국, 배헌재

초록

소형화되는 전기, 전자 제품의 효율성과 신뢰성를 제고시키기 위해서 주요 부품인 마그네트 와이어의 내열성에 대한 연구가 진행되고 있다. 마그네트 와이어의 내열성은 주로 에나멜 바니쉬로부터 형성되는 고분자 피막의 물성과 밀접한 관계가 있다. 내열성 에나멜 바니쉬의 설계와 도막 형성과정이 와이어의 물성과 관련지어 논의되었다. 아울러 내열성에 영향을 주는 요인들을 완성 와이어의 물성 평가방법을 통하여 고찰하였다.

Current research aimed at investigating of heat-resistance of magnet wire to endow miniaturizing electronic equipment with a high efficiency or reliability. Thermal stability of magnet wire has a close relationship with physical properties of polymeric coating that is formed from enamel varnish. Design of heat-resistant enamel varnish and coating technology of varnish solution were briefly described. Some factors which have a thermal effect on wire were discussed through the evaluation method of the wire properties.

[References]

Pendleton WW, "Encyclopedia of Materials Science and Engineering," ed. M.B. Bever, 4, 2642, Pergamon Press, Oxford (1986)
Alkire MJ, Huey SR, Wire J. Int., 24 (1989)
Walrath GA, Smith SD, U.S. Patent, 4,420,535 (1983)
Hoessel P, Schupp H, U.S. Patent, 5,059,660 (1991)
Payette LJ, IEEE Trans. Insul. Manaz., 5, 6 (1990)
Deanin RD, "Polymer Structure, Properties and Application," Part 3, 88, Maple Press, York (1972)
GoldStar Cable Cat., Magnet Wire, No. EEB 101 (1983)
VanStrien RE, U.S. Patent, 3,377,321 (1968)
Keating STJ, Wright JZWH, J. Polym. Sci., 8, 683 (1970)
Gordina TA, Vysok. Soyed., 15B237(3), 612 (1977)
Kim YK, Rasmussen PG, Macromolecules, 24, 6357 (1991)
Kim YK, Rasmussen PG, J. Polym. Sci. A: Polym. Chem., in press (1993)
Meyer JF, U.S. Patent, 3,211,585 (1965)
Yodis JC, Proceedings of the 19th E/EIC, 195 (1989)
Battisti AJ, Lin CL, Proceedings of the 19th E/EIC, 199 (1989)
이수훈, 도료와도장, 49, 61 (1986)
GoldStar Cable Research Inst., 연구보고서 (1987)
Nicks PF, Young GA, U.S. Patent, 4,552,908 (1985)
Czajka TS, Needham RP, U.S. Patent, 4,066,593 (1978)
Battisti AJ, Proceedings of the 18th E/EIC, 165 (1987)
Pauze DR, Zamek OS, U.S. Patent, 4,296,229 (1981)
Jr GV, Cia PSA, Proceedings of the 19th E/EIC, 161 (1989)
Yodis JC, Proceedings of the 20th E/EIC, 244 (1991)
Masuda S, Asano N, J. Appl. Polym. Sci., 20, 357 (1976)

[1] Pendleton WW, "Encyclopedia of Materials Science and Engineering," ed. M.B. Bever, 4, 2642, Pergamon Press, Oxford (1986)

[2] Alkire MJ, Huey SR, Wire J. Int., 24 (1989)

[3] Walrath GA, Smith SD, U.S. Patent, 4,420,535 (1983)

[4] Hoessel P, Schupp H, U.S. Patent, 5,059,660 (1991)

[5] Payette LJ, IEEE Trans. Insul. Manaz., 5, 6 (1990)

[6] Deanin RD, "Polymer Structure, Properties and Application," Part 3, 88, Maple Press, York (1972)

[7] GoldStar Cable Cat., Magnet Wire, No. EEB 101 (1983)

[8] VanStrien RE, U.S. Patent, 3,377,321 (1968)

[9] Keating STJ, Wright JZWH, J. Polym. Sci., 8, 683 (1970)

[10] Gordina TA, Vysok. Soyed., 15B237(3), 612 (1977)

[11] Kim YK, Rasmussen PG, Macromolecules, 24, 6357 (1991)

[12] Kim YK, Rasmussen PG, J. Polym. Sci. A: Polym. Chem., in press (1993)

[13] Meyer JF, U.S. Patent, 3,211,585 (1965)

[14] Yodis JC, Proceedings of the 19th E/EIC, 195 (1989)

[15] Battisti AJ, Lin CL, Proceedings of the 19th E/EIC, 199 (1989)

[16] 이수훈, 도료와도장, 49, 61 (1986)

[17] GoldStar Cable Research Inst., 연구보고서 (1987)

[18] Nicks PF, Young GA, U.S. Patent, 4,552,908 (1985)

[19] Czajka TS, Needham RP, U.S. Patent, 4,066,593 (1978)

[20] Battisti AJ, Proceedings of the 18th E/EIC, 165 (1987)

[21] Pauze DR, Zamek OS, U.S. Patent, 4,296,229 (1981)

[22] Jr GV, Cia PSA, Proceedings of the 19th E/EIC, 161 (1989)

[23] Yodis JC, Proceedings of the 20th E/EIC, 244 (1991)

[24] Masuda S, Asano N, J. Appl. Polym. Sci., 20, 357 (1976)