Korean Chemical Engineering Research, Vol.54, No.6, 767-774, December, 2016
Alumina Sol의 제조 시 사용되는 해교제 종류가 코팅 도막의 물성에 미치는 영향
Effect of Types of Peptizing Agents Used for Preparation of Alumina Sols on the Properties of Coating Films
E-mail:
초록
졸-겔법에 의해 출발물질로 aluminum isopropoxide를 사용하여, 메탄올용매 내에서 가수분해 시킨 후 해교제인 초산, 질산 또는 염산을 각각 첨가하여 해교 시켜 3종류의 alumina sol을 제조하였다. 또한 이 sol에 실란커플링제인(3-glycidyloxypropyl) trimethoxysilane을 첨가하여 코팅 용액을 제조한 후, 이용액을 polycarbonate 기재 위에 담금 코팅 후 열 경화시켜 코팅 도막을 형성하였다. 이 과정 중 해교제의 종류 변화가 코팅 도막의 물성에 미치는 영향을 연구하였다. 그 결과 해교제로서 강산인 염산이나 질산을 사용한 코팅 도막은 H나 2H의 연필경도와 5B의 부착력을 나타내어 우수한 물성을 나타내었다. 반면에 해교제로서 약산인 초산을 사용한 경우에는 HB의 연필경도와 3B의 부착력을 보여 좋지 못한 물성을 나타내었다.
Three different alumina sols were prepared by hydrolyzing aluminum isopropoxide as a starting material in methanol solvent, followed by peptizing with acetic acid, nitric acid or hydrochloric acid as a peptizing agent by the Sol-Gel Method. Also, coating solutions were obtained by adding a silane coupling agent, (3-glycidyloxypropyl) trimethoxysilane to the alumina sols, deposited on polycarbonate substrates by dip-coating and densified by thermal curing. The effect of types of peptizing agents was studied on the properties of coating films. As a result, coating films, prepared with hydrochloric acid or nitric acid as a peptizing agent, showed excellent properties of pencil hardness of H or 2H and adhesion of 5B. On the other hand, coating films, prepared with acetic acid as a peptizing agent, exhibited poor properties of pencil hardness of HB and adhesion of 3B.
Keywords:Sol-Gel Method;Alumina Sols;Peptizing Agents;(3-Glycidyloxypropyl) Trimethoxysilane;Coating Films;Thermal Curing
- Hwang JH, Song KC, Korean Chem. Eng. Res., 49(3), 277 (2011)
- Wouters MEL, Wolfs DP, van der Linde MC, Hovens JHP, Tinnemans AHA, Prog. Org. Coat., 51, 312 (2004)
- Yu YY, Chen WC, Mater. Chem. Phys., 82(2), 388 (2003)
- Kang DP, Park HY, Ahn MS, Myung IH, Lee TJ, Choi JH, Kim HJ, Polym. Korea, 29(3), 242 (2005)
- Kim SW, Korean J. Chem. Eng., 28(1), 298 (2011)
- Song KC, Chung IJ, J. Non-Cryst. Solids, 108(1), 37 (1989)
- Song KC, Chung IJ, J. Non-Cryst. Solids, 107(2), 193 (1989)
- ASTM D 3359, “Standard Test Methods for Measuring Adhesion by Tape Test,” ASTM International, 927-929(1997).
- Park JL, Kim TH, Sung JS, Song KC, Korean Chem. Eng. Res., 42(1), 96 (2004)