Copolymaleimide-based zwitterionic polysulfobetaines (PM-SBs) were prepared by a "top down" method for the first time. Interfacial studies of these polymers showed many interesting characteristics. These PM-SBs did not require any salt in the form of sodium chloride (NaCl) to dissolve in water and exhibited exceptional salt tolerance. PM-SBs showed very mild thermogelling behavior. The viscosity of 5 wt % aqueous solution of polymers increased with increasing concentration of salt without showing any limits within the salt concentrations studied [200g/L of NaCl (3.4 M)] in contrast to other reported zwitterionic polysulfobetaines. Dynamic light scattering (DLS) studies also indicated a structure-dependent particle size with varying concentrations of NaCl solution. The uniformity of particles of 5 wt % aqueous solution of PM-SBs increased with increasing concentration of NaCl. At 0.1 wt % concentration, even in the absence of NaCl, mild aggregation was noticed. The concentration of aggregated particles increased with the increasing concentration of NaCl. Because of the exceptionally high salt tolerance, these polymers are potentially suitable for applications in antifouling, oil field, personal care formulations, and water purification.