Fixed-bed column studies were undertaken to evaluate the performance of iron oxide-coated cement (IOCC) in removing As(V), from aqueous environment, under varying operating conditions. Investigations revealed IOCC to be a very efficient media for the removal of As(V) from water. The Bohart and Adams sorption model was employed to determine characteristic parameters such as depth of exchange zone, time required for exchange zone to move its own height, adsorption rate, and adsorption capacity, useful for process design. The IOCC media effectively removed As(V) from a 2 mg/L solution with a maximum adsorption capacity of 505.3 mg/L. Predicted data points obtained using a Freundlich isotherm model were compared against experimental data points determined in the dynamic process. The effects of important design parameters such as flow rate and influent concentration on the As(V) breakthrough curves were also investigated. The bed depth service time (BDST) model was extended to the prediction of service times of columns operated at different flow rates and influent concentrations and these predicted values were compared with the experimental values. The columns were regenerated by eluting the bound As(V) with 10% NaOH after the adsorption studies. (c) 2005 Elsevier Inc. All rights reserved.